Easy Installation Guide: Aroma Sense Shower Head

The Aroma Sense shower head is a luxury aromatherapy shower head that emits vitamin C and natural aroma oils to promote healthier skin and hair. It also removes chlorine and other contaminants from tap water. Installation of the shower head is easy and similar to that of a standard wall-mounted shower head. The process involves removing the old shower head, cleaning the shower arm threads, attaching the mounting bracket, and then attaching the shower head hose and new handheld shower head.

Aroma Sense Shower Head Characteristics and Values

Removing the old shower head

Step 1: Try to Remove the Shower Head by Hand

First, try to remove the shower head by hand. Grip the shower head or the connecting nut, depending on the design of your shower head, and turn it counterclockwise to unscrew and remove it. If you need more leverage, hold the shower pipe with your other hand as you turn, taking care not to bend or move the shower pipe.

Step 2: Use a Wrench or Pliers

If you can't remove the shower head by hand, you'll need some basic supplies: adjustable pliers or a wrench, and a cloth rag. Cover the adjustable pliers or wrench with the cloth rag to protect the fitting, and place it over the connecting nut. Tighten the pliers or wrench as needed to grip the connection, then turn counterclockwise to unscrew and remove the old shower head.

Step 3: Clean a Stuck Shower Head with Vinegar

If the shower head is still stuck, it may have mineral deposits that need to be loosened. Fill a plastic bag with white vinegar and fasten it over the stuck fitting. Wait several hours or overnight, then remove the plastic bag and return to Step 2 to remove the old shower head.

Step 4: Prepare Your Work Space

Before attempting to remove your stuck shower head, prepare your work space. Cover the floor of your shower or tub with a thick work blanket to prevent any damage to your tub or shower. You will also be handling small parts, so stuff a cloth down the drain to prevent losing any pieces.

Step 5: Turn Off the Water Supply

Although it is not always necessary, it is advised that you shut off the water source before attempting to remove a stuck shower head. The water valves may be located under the bathroom sink or in the basement directly below the tub.

Cleaning the shower arm threads

To clean the shower arm threads, you will need to remove any existing buildup. This can be done by using a small brass brush or a vinegar soak. If the threads are broken or damaged, you may need to use a special tool to remove them, such as a Superior Tool Shower Arm Thread Remover. Alternatively, you can try using a hacksaw blade to cut through the threads, being careful not to damage the surrounding area. Once the threads are removed, you can install a new shower arm.

If you are looking to clean the shower arm threads as part of installing an Aroma Sense shower head, it is important to ensure that the threads are free of any debris or buildup that could interfere with the installation. Here are some detailed steps to guide you through the process:

• Inspect the shower arm threads: Before cleaning, carefully examine the threads for any signs of damage or corrosion. This will help you determine the best cleaning approach.
• Gather your cleaning supplies: You will need a few basic supplies for this task. Assemble a small brass brush, vinegar, and some clean cloths. The brass brush can be found at most hardware stores.
• Prepare the vinegar solution: Pour white vinegar into a small bowl or container. You will use this to soak the threads and break down any mineral deposits or buildup.
• Protect the surrounding area: Use tape or a waterproof covering to protect the surrounding area from the vinegar. This is especially important if you have tiles or surfaces that might be affected by the vinegar.
• Soak a cloth in vinegar: Dip a clean cloth into the vinegar solution and wring out any excess. You want the cloth to be damp but not dripping.
• Wrap the cloth around the shower arm threads: Carefully wrap the vinegar-soaked cloth around the threads, ensuring that it makes good contact with the surface. You can secure it in place with tape or elastic bands if needed.
• Allow the vinegar to work: Let the vinegar-soaked cloth remain on the threads for 15-30 minutes. The vinegar will help dissolve any buildup or mineral deposits.
• Scrub with a brass brush: After soaking, use the small brass brush to gently scrub the threads. This will help dislodge any remaining buildup and ensure that the threads are clean.
• Rinse and dry: Remove the cloth and rinse the shower arm threads with clean water. Use a dry cloth to thoroughly dry the area, removing any remaining moisture.
• Inspect and repeat if necessary: Once the area is dry, carefully inspect the threads again. If you notice any remaining buildup, repeat the cleaning process until the threads are completely clean.

By following these steps, you will effectively clean the shower arm threads, ensuring that they are ready for the installation of your new Aroma Sense shower head. Remember to wear protective gear, such as gloves and eye protection, during the cleaning process.

Applying pipe thread or Teflon tape

To install your Aroma Sense shower head, you may need to apply pipe thread or Teflon tape to the shower arm before attaching the shower head. Here is a step-by-step guide on how to do this:

Step 1: Clean the Shower Arm

Before applying the Teflon tape, ensure that the shower arm is clean and dry. Use an all-purpose cleaner to wipe down the shower arm threads, removing any dirt, grime, or old residue. This will ensure a smooth and even application of the tape.

Step 2: Start the Teflon Tape on the Second Thread

Hold the roll of Teflon tape in one hand and the shower arm in the other. Line up the end of the tape with the second thread from the end of the shower arm. Hold the tape in place with your thumb, ensuring it lies flat and does not bunch up. This will ensure that the tape does not block the opening of the shower arm.

Step 3: Wrap the Teflon Tape in the Same Direction as the Threads

Pull the Teflon tape tight and guide it around the shower arm, following the direction of the threads. As you wrap the tape, overlap half of the piece below it. The number of wraps will depend on the thickness of the shower arm: use 1-2 wraps for 1/4-3/8 inch pipes, 2-3 wraps for 1/2-3/4 inch pipes, or 3-4 wraps for 1-1 1/4 inch pipes. Cut or break the tape from the roll when you reach the end of the threads.

Step 4: Press the Tape Down Tightly

Run your thumb over the tape to smooth it out and press it down tightly against the threads. If the tape is applied correctly, it should be tight and you should be able to see the shape of the threads through the tape. If the tape is loose, bubbled, or bunched up, remove it and reapply.

Step 5: Screw on the Shower Head

Once the Teflon tape is applied correctly, you can screw on the Aroma Sense shower head. Turn it in the direction of the threads until it is snug. Do not over-tighten, as this may damage the threads. Check for leaks, and if necessary, reapply the tape or add pipe dope for extra leak protection.

By following these steps, you can effectively apply pipe thread or Teflon tape when installing your Aroma Sense shower head, ensuring a watertight and secure connection.

Attaching the mounting bracket

Next, check if your mounting bracket has a rubber washer. If it does, you can skip this step. If not, you'll need to wrap some pipe thread or Teflon tape around the threads of the shower arm. This will act as a seal and help to prevent leaks.

Now you're ready to attach the mounting bracket. Align it with the end of the shower arm, making sure that the open piece on the bracket is facing up and the middle threaded piece is facing down. This is where you'll attach the shower hose later. Begin screwing the mounting bracket on by hand in a clockwise direction until it feels tight. If you want to tighten it further, you can use a washcloth and an adjustable wrench, but be careful not to overtighten and damage the threads.

Once the mounting bracket is securely attached, you can move on to the next step of attaching the shower hose.

Attaching the shower head hose

Next, attach your new handheld Aroma Sense shower head to the cone-shaped end of the shower hose. Screw it on in a clockwise direction until it is tight. The cone-shaped end of the hose will now be attached to your new shower head handle and will slide into the mounting bracket. This means you can return your handheld shower head to its mounting bracket when it is not in use, or if you want to use it as a mounted shower head.

If you are installing a handheld shower head, your kit should come with a hose and mounting bracket. You will also need pipe thread or Teflon tape if the included mounting bracket doesn't have a built-in rubber washer.

Frequently asked questions