The Aroma Electric Water Kettle is a handy appliance for quickly boiling water for tea, coffee, hot chocolate, and more. It features a removable, washable spout filter that minimizes escaped steam and suspended particles from being poured out of the kettle. If you need to replace the filter, you can purchase one from the Aroma website for a couple of dollars. To install the filter, simply follow the instructions in the user manual or contact Aroma customer support for guidance.
Characteristics | Values |
---|---|
Material | Stainless Steel |
Capacity | 1.5L or 1.7L |
Speed | Cup-a-minute speed |
Auto Shut-Off | Yes |
Water-level Indicator | Yes |
Handle | Comfortable stay-cool handle |
Spout | Nondrip spout |
Housing | Polished stainless-steel |
Filter | Removable, washable spout filter |
Dimensions | 6.6" H x 9" W x 9.3" D |
Power | 1.2E+2 Volts |
What You'll Learn
How to buy a replacement filter for the Aroma Electric Water Kettle
To buy a replacement filter for the Aroma Electric Water Kettle, you can follow these steps:
Firstly, identify the model of your Aroma Electric Water Kettle. This is important as there are different types of Aroma kettles, and you need to ensure you get the correct replacement filter for your specific model. The model number is typically a 6-7 character code in the format of XXX-XXXX and can be found on the manufacturer's sticker at the bottom or back of your kettle. For electric kettle models, the code will begin with "AWK" followed by a hyphen and 3-4 numbers and/or letters.
Once you have identified the model number, go to the Aroma website or contact Aroma Housewares Co. directly by calling their customer support number at 1-800-276-6286. Provide them with your model number and ask for the "four-window filter" with the part number AWK-115S_9. The replacement filters are available for $2 each, plus a flat shipping rate of $2.50.
By following these steps, you can ensure you purchase the correct replacement filter for your Aroma Electric Water Kettle, keeping your kettle functioning properly and your water free of mineral scale buildup.
Aleppo's Culinary Delights: Traditional Recipes, Aromatic Flavors
You may want to see also
How to clean an Aroma Electric Water Kettle
To clean an Aroma Electric Water Kettle, it is recommended to clean the exterior daily. Use a damp cloth to wipe down the kettle, removing any water splashes and residue. Then, dry and polish the kettle with a soft cloth.
To clean the interior, you can use white vinegar, lemon juice, citric acid, baking soda, or flat soda. Here is a step-by-step guide for cleaning the inside of the kettle using vinegar, which is the next best thing to a specialised descaling agent:
- Combine water and vinegar: Fill your kettle with 1 part white vinegar and 3 parts water.
- Bring the mixture to a boil: Allow the mixture to boil and then leave it to stand overnight.
- Drain the kettle: Fill the kettle with water, boil it, and then drain the water. Repeat this step twice more to ensure that any lingering vinegar odour or taste is removed.
You can also use lemon juice or citric acid as a cleaning agent. Follow these steps:
- Add the cleaning agent: Pour a tablespoon of citric acid powder or lemon juice into the kettle, and add enough water to cover the base.
- Boil the mixture: Turn the kettle on and allow the mixture to boil.
- Discard the water: Once boiled, discard any remaining water and rinse the kettle thoroughly.
Another option is to use baking soda to clean the interior of the kettle. Here are the steps:
- Add baking soda: Add 1-2 tablespoons of baking soda to the kettle, and then fill it with water.
- Bring to a boil: Turn the kettle on and bring the water to a boil.
- Let the kettle cool: Remove the kettle from the heat and let it sit for 10 minutes.
- Scrub the kettle: Gently scrub the inside of the kettle with a non-abrasive brush. Rinse the kettle with clean water and dry it with a dish towel.
It is important to note that the kettle should never be immersed in water to avoid electrical shock and irreversible damage. Always refer to the product manual for specific cleaning and care instructions.
Aromatherapy: Benefits and Uses of Aroma Oils
You may want to see also
How to fix a broken lid on an Aroma Electric Water Kettle
If the lid of your Aroma Electric Water Kettle is broken, there are several ways to fix it. Firstly, it's important to diagnose the issue. Common reasons for electric kettle lids failing to close include a loose or damaged hinge, a misaligned lid, or broken or missing parts such as the locking mechanism or plastic tabs.
If the hinge is loose, simply tighten it with a screwdriver. If it's damaged beyond repair, you'll need to replace the entire lid. If the lid is misaligned, you can adjust it by gently bending the metal tabs that hold it in place with pliers.
If there are broken or missing parts, you may need to replace them. Contact the manufacturer or visit a hardware store to obtain replacement parts. If the lid has cracks or broken plastic parts, you can use a plastic weld repair kit to fix them. This involves melting the plastic around the damaged area and fusing it back together.
- Unplug the kettle and allow it to cool down: Before starting any repairs, always ensure the kettle is unplugged and has cooled down completely.
- Remove the screws: Locate the screws holding the lid in place and carefully remove them with a screwdriver, noting their size and location.
- Inspect the hinge: Once the screws are removed, lift the lid and inspect the hinge for any signs of looseness, damage, or broken parts.
- Repair or replace the lid as needed: If the hinge is damaged beyond repair, you'll need to replace the lid. If there are broken or missing parts, obtain replacement parts from the manufacturer or a hardware store.
- Reassemble the lid: After repairing or replacing parts, align the lid on the kettle and insert the screws, tightening them securely without overtightening.
Additionally, if your kettle has a broken plastic handle, you can glue it back together using a high-temperature epoxy compound. Sand the handle and lid mating areas with sandpaper, then mix and spread the epoxy on the surfaces to be bonded. Press the pieces together, wipe off any excess epoxy, and let it cure for 24 hours or more.
When repairing your Aroma Electric Water Kettle, always refer to the owner's manual for specific instructions and safety precautions.
Aroma Diffusers: Do They Double as Humidifiers?
You may want to see also
How to prevent mineral deposits in an Aroma Electric Water Kettle
The Aroma Electric Water Kettle is equipped with a mesh filter at the pouring spout to minimize escaped steam and the presence of suspended particles (mineral scale) in the water being poured out. Regular use of the kettle can leave behind mineral deposits or cause white residue and scale build-up on the interior. While this residue is normal and will not negatively affect the user or the unit, it can impact the quality of prepared meals/drinks over time if not cleaned properly.
To prevent mineral deposits in an Aroma Electric Water Kettle, it is recommended to follow these steps:
- Use filtered or distilled water: The best way to prevent mineral build-up is to use filtered or distilled water, which has a lower mineral content. If you are using tap water, consider investing in a water filter pitcher or bottle to filter the water before pouring it into the kettle.
- Empty and dry the kettle after each use: After using the kettle, empty any remaining water and leave the lid off to allow the kettle to air dry. This helps prevent the formation of mineral deposits.
- Regularly clean the kettle: Clean your kettle every one to three months, depending on how often you use it. If used daily, the kettle should be thoroughly cleaned and descaled at least seasonally. For those in areas with hard water, descale the kettle's interior once a month.
- Descale the kettle with vinegar or lemon juice: To remove any mineral deposits that have built up, fill the kettle with a solution of equal parts water and either distilled white vinegar or lemon juice. Bring the solution to a boil, then let it sit for at least 20 minutes before pouring it out. Rinse the kettle with clean water and boil fresh water to ensure any traces of vinegar or lemon juice are removed.
- Soak the filter in a vinegar solution: If your kettle has a removable filter, soak it in a solution of equal parts water and distilled white vinegar. Then, wash the filter with hot, soapy water.
- Scrub the kettle interior: Use a soft-bristled brush or sponge to scrub away any remaining mineral buildup inside the kettle, especially around the spout.
- Clean the kettle exterior: Mix warm water with a few drops of dishwashing liquid. Use a sponge to wipe down the outer surface, removing any splatters or greasy residue. For tough stains, dip the damp sponge in dry baking soda and scrub gently. Finish by wiping the exterior with a lint-free cloth.
Aromatherapy Soaps: Best Places to Buy
You may want to see also
How to descale an Aroma Electric Water Kettle
To descale an Aroma Electric Water Kettle, you will need to perform a deeper clean than your usual daily wipe-down of the exterior. Descaling is the process of removing limescale buildup inside your kettle, which comes from calcium, magnesium, and other minerals found in your water.
It is recommended that you descale your kettle around once a month if you use it daily. This will ensure that your morning cup of tea always tastes perfect.
What you'll need:
- White vinegar (or lemon juice, citric acid, or baking soda)
- Water
- A non-abrasive brush or microfiber cloth
Steps to descale your kettle:
- Combine one part white vinegar with three parts water inside your kettle.
- Bring the mixture to a boil.
- Allow the mixture to stand overnight.
- Drain the kettle and fill it with fresh water.
- Bring the water to a boil and then drain the kettle again.
- Repeat the rinsing process once more to ensure that any lingering vinegar odor or taste is removed.
Your kettle is now descaled and ready to use!
Other methods for cleaning your kettle:
You can also use lemon juice, citric acid, or baking soda to clean the inside of your kettle. These methods involve heating your preferred solution, allowing it to sit, and then lightly scrubbing the inside of the kettle before rinsing and drying. For example, if using lemon juice or citric acid, you would:
- Pour a tablespoon of citric acid powder or lemon juice into the kettle.
- Add enough water to cover the base and turn on the kettle.
- Once the mixture has boiled, discard any remaining water and rinse the kettle thoroughly.
Descaling and cleaning your Aroma Electric Water Kettle on a regular basis will help to maintain the performance of your kettle and ensure that your hot beverages always taste their best.
Cruising Alaska: Can You Smell the Aroma on Ruby Princess?
You may want to see also
Frequently asked questions
You can buy replacement filters on the Aroma website for $2 each. You will need to call them to ensure they send the correct filter for your model.
Your product’s model number is a 6-7 character code in the format of XXX-XXXX. Electric kettle model numbers will begin with “AWK” followed by a hyphen and 3-4 numbers and/or letters.
The filter should be placed at the pouring spout.
The mesh filter must be in place for the kettle to operate properly. It minimises escaped steam and stops suspended particles (mineral scale) from being poured out of the kettle.
It is recommended that you clean your kettle daily and descale it once a month if you use it daily. Descaling involves removing limescale buildup that comes from calcium, magnesium and other minerals found in your water.