The Worth Of Aroma Plus Grinder: Is It Worthwhile?

The Aroma 3 grinder by Old Mate Designs is a threadless grinder with a functional ball bearing that makes it spin for up to three minutes. It is made of 100% stainless steel and has super-sharp teeth that will stay sharp. It is easy to grip thanks to its unique flat-side design and has no metal-on-metal contact while grinding. The Aroma 3 is a premium grinder that is priced at $191 AUD.

Is the Aroma 3 grinder worth the price? Let's find out.

Aroma 3's performance

The Aroma 3 grinder is a premium product with a price tag to match. However, its performance and durability seem to justify the cost. The Aroma 3 is a 3-piece grinder made from 100% stainless steel and featuring super-sharp teeth that will stay sharp. It has a threadless design, with a strong neodymium magnet holding the top in place. The top spins freely, with no metal-on-metal contact, and the grinder can be opened and closed with a gentle squeeze/pivot action. The bearing is fully functional and adds to the fun of using the grinder, but it is also susceptible to dirt and debris, and can be difficult to hold and carry.

The Aroma 3's performance is impressive. It produces a perfect medium grind, and its sharp teeth make fast work of even the stickiest nugs. It chews through herbs in seconds and is built to last a lifetime. The lid spins very quickly and freely, and when it starts spinning freely, you know your herb is totally shredded. The grinder is also easy to grip thanks to its unique flat side design. It is heavy and chunky, giving it the feel of something that should be installed in an F-35.

The Aroma 3 is easy to clean. The lid requires careful manoeuvring with a Q-tip, but the rest of the grinder can be soaked in iso and water. The bearing can be replaced if needed, and the grinder itself will last forever.

The Aroma 3 is not without its flaws. It can send bits of kief and herb flying due to centrifugal force if spun too fast while grinding. It is also heavy and therefore not very portable. However, its performance and durability mean that it will likely remain on people's desks and serve as their primary grinder.

Aroma 3's price

The Aroma 3 grinder by Old Mate Designs is priced at $191 AUD or approximately $125 USD, plus $26 USD for express DHL shipping. The price is considered to be in the premium range for grinders, with some reviewers noting that they initially disregarded the product due to it being out of their price range. However, the high-quality design and functionality of the Aroma 3 grinder make it a worthwhile investment for those who use weed frequently.

The grinder is made of medical-grade 304 stainless steel and features super-sharp teeth that will stay sharp. It has a unique flat-side design that makes it easy to grip and a replaceable bearing, which makes it spin easily. The Aroma 3 grinder also has no metal-on-metal rubbing while grinding and no anodizing or ceramic coatings to chip and end up in the grind.

The Old Mate Designs website offers the option to add custom engraving to the bottom of the grinder for an additional $10 AUD or a custom design on the lid for an extra $20 AUD.

Aroma 3's design

The Aroma 3 grinder by Old Mate Designs is an Australian-made grinder with some unique features. Its design is threadless, with a gentle squeeze/pivot action to release the strong neodymium magnet. The 3-piece design is 100% stainless steel, with super-sharp teeth that will stay sharp. It has a unique flat side design that makes it easy to grip. The Aroma 3 also features a replaceable bearing (skateboard bearing) with no metal-on-metal rubbing while grinding. It is CNC machined from medical-grade (304) stainless steel and is designed, engineered, and CNC machined in-house at Old Mate Designs HQ.

The Aroma 3 grinder has a functional ball bearing that allows the top half to spin freely on the center post while grinding, with no metal-on-metal contact. This makes it fun and satisfying to spin and play with, and it functions great as a grinder. The sharp teeth make quick work of even the stickiest nugs. You know when the herb is totally shredded because the lid will start spinning freely, and it’s a satisfying feeling. The threadless design is easy to open and close, and the magnets are strong without being obnoxious.

The newest version of the Aroma 3 uses PEEK ball bearings instead of stainless steel. These bearings are nano-tech lubricated and will spin for nearly three minutes. The Aroma 3 is not just a gimmick; it is a great, durable, and fun grinder that is easy to use. The fidget-spinner element provides great pleasure to people with ADHD.

The Aroma 3 grinder is heavy and chunky, giving it a premium feel. It feels like it should be installed in an F-35. It is heavy and solid, and it should last a lifetime. The lid has a really cool etched pattern on the inside of the grind. The innovative, industrial design includes a flat top and bottom, branded with Old Mate Designs on both sides. The grooves on the side are a great touch and make it nice to hold in the hand.

The Aroma 3 grinder is easy to clean. The lid requires careful maneuvering with a Q-tip because the bearing cannot get wet. The rest of the grinder can be soaked in ISO and rinsed.

Aroma 3's ease of use

The Aroma 3 grinder is designed with ease of use in mind. It has a threadless design, which means that it can be opened with a gentle squeeze/pivot action to release the strong neodymium magnet. The magnet is strong without being obnoxious, making it easy to open and close. The grinder is also easy to grip thanks to its unique flat side design.

The grinder's bearing is not just a gimmick; it makes spinning the lid much easier and removes any metal-on-metal contact while grinding. The bearing can also be easily replaced if needed. The Aroma 3 is made of medical-grade (304) stainless steel, which is a much harder material than aluminium. This means that the grinder is more durable and less likely to suffer from wear and tear, such as dulling teeth. The stainless steel also means there is no anodizing/ceramic coating to chip and end up in the grind.

The Aroma 3 is designed to be easy to clean, with no metal-on-metal rubbing while grinding. The grinder has super-sharp teeth that will stay sharp, and it produces a perfect medium grind. It is heavy and durable, and built to last a lifetime.

Aroma 3's maintenance

Aroma 3s Maintenance

Maintaining your Aroma 3 grinder is important for several reasons. Firstly, it will prolong the life of your grinder, ensuring it performs at its best for longer. Regular maintenance also allows you to identify and fix any small defects before they become costly repairs. Additionally, maintaining your grinder helps ensure it complies with government regulations, and a full service history can enhance the value of the machine when it comes time to resell.

To maintain your Aroma 3 grinder:

Cleaning

Keep your grinder clean by regularly removing any residue buildup. Use a small brush to gently dislodge any stuck particles from the teeth and other surfaces. You can also use a mild detergent and a soft cloth to wipe down the exterior and interior surfaces of the grinder. Ensure that it is thoroughly dried before use.

Lubrication

The Aroma 3 grinder features a replaceable bearing that may require lubrication over time. Old Mate Designs recommends using nano-tech lubrication for the PEEK bearings to ensure optimal performance and a long lifespan.

Teeth Inspection

The Aroma 3 is made from medical-grade stainless steel, which is known for its durability. However, it is still important to inspect the teeth periodically for any signs of wear and tear. Look for any chipping, dulling, or other damage that could impact the performance of the grinder. If you notice any issues, contact Old Mate Designs for advice on repairs or replacements.

Magnet Maintenance

The Aroma 3 uses strong neodymium magnets to secure the grinder's closure. Over time, these magnets may collect debris, impacting their performance. Clean the magnets periodically, and ensure they are free of residue or buildup to maintain a secure closure.

Bearing Replacement

As mentioned, the bearing in the Aroma 3 grinder is replaceable. If you notice increased resistance or a decrease in performance, it may be time to replace the bearing. Refer to the Old Mate Designs website for instructions on bearing replacement and reach out to their team if you have any questions or concerns.

By following these maintenance steps, you can help ensure your Aroma 3 grinder performs optimally and lasts for years to come. Remember to refer to the official Old Mate Designs resources and support for specific guidance and always exercise caution when handling and maintaining your grinder.

Frequently asked questions