Ultransmit Aroma Diffuser: Easy Steps To Use And Enjoy

The Ultransmit aroma diffuser is an ultrasonic essential oil diffuser that doubles up as a purifier, humidifier and mini night light. It uses new technology to diffuse essential oils into a room in three seconds without the need for burning or heating. To use the Ultransmit aroma diffuser, place it on a flat, stable, and water-resistant surface, fill it with 50ml of tap water, add 5-10 drops of essential oil, place the covers back on, plug in the adapter, and turn it on. The diffuser can be used in a variety of spaces, including bedrooms, living rooms, offices, and hospitals. It is safe and easy to use, with a four-hour runtime and an auto shut-off feature.

How to set up the Ultransmit aroma diffuser

To set up the Ultransmit aroma diffuser, start by placing it on a flat, stable, and water-resistant surface, ensuring there is no risk of spillage. Keep the unit upright at all times and do not block the bottom. Place it away from walls, other objects, and especially flammable surfaces or substances.

Next, fill the diffuser with tap water (approximately 50ml) and add 5-10 drops of essential oil or an essential oil blend. Once you have replaced the covers, plug the adaptor into the wall and turn the unit on.

To adjust the mist level, hard-press the "MIST" button until you hear a beep (one beep indicates high mist, two beeps indicate low). You can also set the desired operation time by repeatedly pressing the "MIST" button (options include 1, 3, or 6 hours, or continuous operation).

The Ultransmit aroma diffuser is now ready to use and will turn off automatically when the water is depleted after around 4 hours.

How to adjust the mist level

To adjust the mist level on your aroma diffuser, you must first ensure that the water level is correct. If the water level is too low, the diffuser will not be able to produce as much mist as possible. Conversely, if the water tank is overfilled, this will also negatively impact the mist output. Therefore, it is recommended to fill the water tank slightly below the maximum fill line.

The type of water used can also impact mist levels. Using distilled or filtered water is preferable to tap water, as tap water may contain minerals that could clog the device over time.

The placement of your aroma diffuser can also impact its mist output. Ensure that the unit is sitting on a hard, flat surface. Avoid placing it on soft surfaces, such as towels, which could absorb the ultrasonic vibrations. Additionally, do not place the diffuser directly under an air vent or fan, as this will disperse the mist and reduce its intensity.

Another factor that affects mist levels is the quality of essential oils used. Using 100% pure essential oils is recommended, as synthetic fragrance oils can negatively impact the performance of the diffuser and void warranties.

To increase mist levels, you can also adjust the settings on your diffuser. This may involve increasing the intensity or fan speed, or utilising specific mist settings if available on your model. Some diffusers offer multiple settings, allowing for greater control over the mist output.

How to clean the Ultransmit aroma diffuser

To clean the Ultransmit aroma diffuser, start by unplugging the unit and removing any essential oils or blends. Then, empty the water from the back side—where the adaptor is plugged in—and wipe the diffuser with a dry paper towel.

The Ultransmit aroma diffuser is easy to clean and maintain. Its diffusion technology avoids the mess of hot oily water, so you won't have to worry about any spills or leaks. The unit is also designed with safety in mind, eliminating the risk of a naked flame from a candle and featuring an auto-shutoff function to prevent overheating or injury.

To ensure optimal performance and longevity, it is recommended to clean your Ultransmit aroma diffuser regularly, especially after each use. This will help prevent the build-up of essential oil residue and maintain the unit's effectiveness in diffusing aromas.

Additionally, when cleaning, be sure to handle the diffuser with care. Do not lean the unit over while operating or cleaning, as this may cause water or oil to spill. Always place the unit on a flat and stable surface before filling or wiping it down.

How to add essential oils

To add essential oils to your Ultransmit aroma diffuser, start by placing the unit on a flat, water-resistant surface, ensuring it is stable and secure. Remove the cover as per the instructions that come with your diffuser. Then, fill the diffuser with approximately 50ml of tap water.

Once the water is in the diffuser, you can add your essential oils. For the Ultransmit diffuser, add 5-10 drops of pure essential oil or an essential oil blend. You can use any pure and therapeutic essential oils or blends.

After adding the essential oil, place the cover back on the diffuser correctly. Then, plug the adaptor into a wall socket and turn the unit on.

Your Ultransmit diffuser is now ready to use, and will fill your room with fragrance.

Precautions and warnings

• Always place the Ultransmit diffuser on a flat, stable surface before use.
• Do not lean the unit over while it is operating.
• To clean, empty water from the backside where the adaptor is plugged in, and wipe with a dry paper towel. Do not use a damp cloth.
• Do not overfill the diffuser with water. Follow the instructions for the correct amount of water and essential oil to use.
• Ensure you use only water and essential oils in the diffuser. Do not use any other liquids or substances.
• Keep the diffuser away from children and pets at all times.
• Do not leave the diffuser unattended while it is operating.
• Always unplug the adaptor and turn off the unit when not in use.
• Do not attempt to modify or repair the diffuser. If there is an issue, contact the manufacturer or a qualified technician.
• Be cautious when using the diffuser around individuals with respiratory issues or allergies.
• Regularly check the diffuser for any signs of wear or damage. If any issues are identified, discontinue use and contact the manufacturer or a technician.
• Ensure there is sufficient ventilation in the room when using the diffuser.
• Do not block or cover any of the diffuser's vents or openings.
• Keep the diffuser away from direct heat sources or open flames.

Frequently asked questions