Seamus Hammond
The Lampe Berger fragrance lamp is a unique diffusion system that purifies the air and leaves a pleasant fragrance. The lamp is filled with fragrance, which is mostly pharmaceutical-grade alcohol. When burned, the alcohol removes existing odours from the air and eliminates bacteria. The lamp offers a unique olfactory quality and a fine diffusion of the perfume contained in the lamp refills. The catalytic diffusion process, perfected over the years, destroys the molecules responsible for undesirable odours. The lamp can be used in any room in the house, including the lounge, bathroom, kitchen, and bedroom. It is important to note that the lamp should not be used around sensitive individuals such as infants, pregnant women, or people undergoing heavy medical treatment as the alcohol in the fragrance can cause discomfort.
| Characteristics | Values |
|---|---|
| Fill lamp with | Maison Berger Paris perfume |
| Fill level | No more than 2/3 full |
| First use | Let the wick soak for 20 minutes |
| Cap | Keep the cap on during the first 20 minutes to prevent fragrance evaporation |
| Lighting | Remove the cap and light the burner |
| Flame | High flame at the beginning, no smoke |
| Blow out | After 2-3 minutes |
| Diffusion time | 30 minutes |
| Stop diffusion | Replace the stopper |
| Burner replacement | Every 200 uses or once a year |
| Fragrance change | Use Air Pure to clean the burner between fragrances |
| Mixing fragrances | Do not mix fragrances except for Air Pure |
| Refills | Only use MAISON BERGER PARIS catalytic lamp refills |
| Stopper | Put the stopper back on the burner to stop the catalysis |
| Safety | Do not use around infants, pregnant women or people undergoing heavy medical treatment |
Explore related products
What You'll Learn
How to fill a Lampe Berger fragrance lamp
Filling a Lampe Berger fragrance lamp is a simple process, but there are a few important things to keep in mind to ensure optimal performance and safety. Here is a step-by-step guide on how to fill your Lampe Berger fragrance lamp:
- Choose a Fragrance: Lampe Berger offers a wide range of fragrances specifically designed for their lamps. These fragrances are alcohol-based and designed to work with the lamp's catalytic system. You can also create your own lamp fuel by mixing a small amount of perfume with 91% alcohol (avoid using 71% rubbing alcohol as it will leave residue and affect performance).
- Prepare the Lamp: Remove the burner from the lamp if it has been inserted. Use the small funnel provided to fill the lamp with your chosen fragrance. Fill the lamp about 2/3 of the way full.
- Insert the Burner: After filling the lamp, insert the burner into the lamp. Make sure the wick is firmly in place.
- Wait for Absorption: Once the burner is in place, put the stopper on and wait for about 20 minutes. This allows the burner and the wick to properly soak up the fragrance.
- Light the Burner: After the waiting period, light up the burner. Let the flame burn for about 2 minutes. This is important to ensure the burner reaches the required temperature for effective catalysis.
- Blow Out the Flame: After 2 minutes, blow out the flame. Be careful, as the burner will be hot.
- Place the Safety Mounting: Put the safety mounting on the lamp. Your Lampe Berger will now purify and fragrance the air in your home.
- Stop Diffusion When Needed: To stop the diffusion, remove the safety mounting and place the stopper on the burner to extinguish the flame. Then, replace the safety mounting. Remember to always keep the lamp tightly closed when not in use to prevent fragrance evaporation and maintain the lamp's performance.
By following these steps, you can enjoy the pleasant fragrances and purification benefits of your Lampe Berger fragrance lamp safely and effectively.
Exploring Dolce & Gabbana's Fragrance Formulas and Unique Scents
You may want to see also
Explore related products
How to light a Lampe Berger fragrance lamp
To light a Lampe Berger fragrance lamp, follow these steps:
Firstly, fill the lamp with your chosen fragrance. Maison Berger Paris recommends filling the lamp body with their home fragrance, no more than two-thirds full. If you are using the lamp for the first time, or switching fragrances, it is recommended to use their Air Pur So Neutral purifying solution. This deodorizing solution can be used to dilute the aroma for less intensity, or burned alone to remove odours without fragrance. It can also be used to clean the wick when changing fragrances. If you are using a fragrance other than Maison Berger Paris, ensure that it is 91% alcohol, as 71% alcohol will not work in catalytic lamps and can damage the burner.
Next, insert the burner into the lamp and put the stopper on. Allow the burner and wick to soak up the fragrance for 20 minutes. If this is the first use, keep the cap on during this step to prevent fragrance evaporation.
After 20 minutes, remove the cap and light the burner. The flame will be high at the beginning, but it should not emit any smoke. Leave the flame burning for 2 minutes to allow the burner to reach the necessary temperature for catalytic oxidation. Do not leave it much longer, as the burner head may turn black.
Once the 2 minutes are up, blow out the flame and place the safety mounting on the lamp. The lamp will now purify and perfume the air. When you want to end the diffusion, remove the safety mounting, place the stopper on the burner, and replace the mounting.
Adding Fragrance to Soap Base: A Beginner's Guide
You may want to see also
Explore related products
How long to leave a Lampe Berger fragrance lamp on for
The Lampe Berger fragrance lamp is a unique diffusion system that purifies the air and adds fragrance to your home. The lamp uses a catalytic burner to eradicate bad smells and bacteria. The heat emitted by the burner attracts and neutralises malodorous molecules, while also diffusing a pleasant scent.
To use the Lampe Berger fragrance lamp, fill the lamp body with your chosen fragrance, ensuring it is no more than 2/3 full. If this is the first use, let the wick soak for 20 minutes, keeping the cap on to prevent fragrance evaporation. Then, remove the cap and light the burner. The flame will initially be high, but it should not emit any smoke.
Now, for the key part of your question: how long should you leave the Lampe Berger fragrance lamp on for? You should leave the flame on for around 2 minutes to allow the burner to reach the required temperature for effective diffusion. Do not leave the flame on for much longer, as the burner head may turn black. Once the 2 minutes are up, blow out the flame and place the safety mounting on top.
Let the fragrance diffuse for around 30 minutes. The maximum duration of use is 1 minute per m3. After this time, replace the mounting and put the stopper in to end the diffusion.
Crafting Scents: Mastering Fragrance in Your Writing
You may want to see also
Explore related products
How to change the fragrances in a Lampe Berger fragrance lamp
Changing fragrances in a Lampe Berger fragrance lamp is simple. Firstly, it is recommended to wait until the lamp is empty before adding a new fragrance. If you switch fragrances often, or like a variety of different scents, it is best to purchase multiple lamps, with a different fragrance for each lamp. This eliminates the hassle of switching out the wick each time.
If you are using the same lamp and same wick, use Lampe Berger Neutral oil or Air Pur to clean the burner and wick between fragrances. This will help to remove the previous fragrance before adding the next. You can also use Neutral to dilute fragrances if you want to reduce their intensity. To do this, add an equal quantity of Neutral to your fragrance oil, or a little more, depending on your preference.
To clean the burner and wick, fill the lamp with Neutral oil or Air Pur and let it burn for 20 minutes. Then, let the burner cool, pour out the Neutral oil or Air Pur, and fill the lamp with your new fragrance.
If you switch fragrances frequently, you can also keep a different wick for each fragrance. Store the wicks that are not in use in zip lock bags, labelled with the type of fragrance.
Demeter Fragrances: A Guide to Application and Enjoyment
You may want to see also
Explore related products
How often to replace the burner in a Lampe Berger fragrance lamp
The Lampe Berger fragrance lamp is a unique diffusion system that eradicates bad smells and bacteria. The lamp contains a wick and a burner, which need to be maintained and replaced periodically for optimal performance.
The burner in a Lampe Berger fragrance lamp should be replaced every 200 uses or once a year, whichever comes first. This is because, over time, the burner may become clogged or soiled, affecting its ability to draw up the fragrance oil and function effectively.
It is important to use only original Lampe Berger fragrance oils in the lamp, as other oils may have a different composition that could affect the performance of the burner and wick. If the lamp is overfilled with oil, it can cause the wick to become overly saturated, leading to difficulties in lighting the burner.
To test if the wick and burner need replacing, there are a few methods. One is to examine the rock part of the wick; if you notice pit holes, it indicates that the wick is worn out and should be replaced. Another method is to let the lamp burn until it runs out of oil and goes out. After it has cooled down, rub your finger against the side of the wick; if you notice an ash-like substance, it signifies that the rock is breaking down and requires replacement.
Additionally, if your Lampe Berger burner won't stay lit, it could be due to a clogged wick. In such cases, cleaning the wick may resolve the issue. To clean the wick, fill the cap of the fuel bottle or a small container with Lampe Berger oil, soak the rock part of the wick in the oil for about 10 seconds, and then place the wick back into the lamp. If the burner still doesn't stay lit, repeat the process until it works.
Alt Fragrances: Legit or Not?
You may want to see also
