Garden Of Life Diffuser: A Step-By-Step Guide To Aromatherapy

The Garden of Life aroma diffuser is a great way to improve the scent of your home and promote health and wellbeing. Diffusing essential oils is an easy process and there are several types of diffusers to choose from, including electric, candle, and reed diffusers. Here's a simple guide to using your Garden of Life aroma diffuser:

First, place your diffuser on a flat surface near the centre of the room to allow for even distribution of the oil. Then, remove the top of the diffuser and fill it with water up to the fill line, usually around 100ml. Add 3-10 drops of your favourite essential oil, being careful not to let the oil touch your skin. Finally, replace the top of the diffuser and turn it on to enjoy the aromatic benefits.

It's important to keep safety in mind when using essential oils. Always follow the manufacturer's instructions and avoid direct contact with the skin. Keep the diffuser out of reach of children and pets, and ensure the room is well-ventilated.

Filling the diffuser with water

• Place your diffuser on a flat, stable surface before you begin. This will ensure that the diffuser remains steady and secure during the filling process.
• Remove the top of the diffuser by lifting, rotating, or popping it off. Some diffusers may have two tops: one decorative and one functional. If you see another casing after removing the first top, go ahead and remove that as well to access the water reservoir.
• Use room-temperature or lukewarm water to fill the diffuser. Avoid using hot or cold water, as this can affect the performance of the diffuser. Fill the diffuser to the indicated fill line, which should be marked on the inside of the reservoir. Do not overfill!
• Use a small measuring cup or glass to fill the diffuser with water. This will help you control the amount of water you are pouring and prevent spills. If your diffuser came with a measuring jug, use that instead.
• Pour the water carefully into the reservoir. Take your time and avoid rushing to prevent spills or splashes. Some diffusers may have a shot glass or another small container that fits inside the reservoir. If so, fill that with water and place it inside the diffuser.
• Ensure that the wick of the diffuser is well-saturated with water. The wick is usually a piece of cotton rope that absorbs the water and aids in diffusing the aroma.
• Do not fill the diffuser with water while it is plugged in or turned on. Always unplug the device and turn it off before filling it with water.
• Avoid getting water on the wooden pieces of the diffuser, as this can damage the unit.
• If you accidentally spill water on the electronic base or any other part of the diffuser, use a kitchen towel or cloth to wipe it dry immediately.
• Once you have filled the diffuser with water, you can add your choice of essential oils to create a pleasant aroma.

Adding essential oils

Once the diffuser is filled with water, it's time to add your chosen essential oil. Unscrew the cap of the essential oil bottle and tilt the bottle directly over the water reservoir. Allow 3–10 drops of oil to fall into the water before screwing the cap back on. You can combine different essential oils, but the total number of drops should not exceed 10 to avoid an overpowering aroma. If you're using a candle diffuser, you only need to add 2–4 drops of essential oil.

After adding the essential oil, replace the top of the diffuser and turn it on. Place the diffuser in the centre of the room, on a flat surface, to allow the oil to distribute evenly. Enjoy the aromatic and therapeutic benefits of your essential oil diffuser!

Replacing the top of the diffuser

To replace the top of the diffuser, first, lift the top off the diffuser. Then, fill the diffuser with room-temperature water, ensuring you do not overfill it. Next, add 3 to 10 drops of your chosen essential oil. Finally, replace the top of the diffuser and turn it on to enjoy the aroma.

If your diffuser has two tops, you will need to remove both to access the reservoir. One will be decorative, and the other will be used to trap excess moisture.

Always consult the manufacturer's instructions for specific guidance on your diffuser.

Turning the diffuser on

To turn on the Garden of Life aroma diffuser, follow these steps:

Firstly, place your diffuser on a flat surface near the centre of the room. This will ensure that the oil distributes evenly throughout the space. It is important to keep the diffuser stable to prevent any spills or accidents. You may also want to place a towel underneath the diffuser to catch any excess water.

Next, remove the top of the diffuser. Most diffusers will have a removable top casing that can be lifted off to reveal the water tank. If your diffuser has two tops, remember to remove both to access the reservoir.

Now, fill the diffuser with water. Use room-temperature or lukewarm water and fill it up to the maximum level indicated inside the tank. Be careful not to overfill the diffuser as this may cause spills or affect its performance.

Add your favourite essential oil to the water reservoir. For best results, add 3-10 drops of essential oil. You can combine different oils, but be mindful not to add more than 10 drops in total to avoid an overpowering aroma.

Finally, replace the top of the diffuser and turn it on. Simply press the power button, and your diffuser will start releasing a fine mist of aromatic vapour into the air. Enjoy the therapeutic benefits of your essential oils!

Some diffusers may have additional settings or lights that you can adjust according to your preferences. Always refer to the manufacturer's instructions for specific guidelines on how to operate your diffuser safely and effectively.

Cleaning the diffuser

To clean your diffuser, start by unplugging it and emptying any excess water from the reservoir. Then, wipe the inside of the reservoir with a paper towel or a microfiber cloth, avoiding the ultrasonic plate.

Next, wash the lid and cover with warm water and soap, and dry them thoroughly before replacing them. Clean the ultrasonic plate with a cotton swab or cotton ball dipped in rubbing alcohol, then rinse it with water on a cotton swab and let it dry.

Refill your clean diffuser to the fill line with room-temperature distilled or purified water, plug it back in, and let it run once through with plain water.

To deep clean your diffuser, unplug it and empty any standing water and essential oils. Fill the diffuser halfway with plain water and add 10 drops of distilled white vinegar to help clean and disinfect the reservoir tank. Do not use any other type of vinegar or cleaner. Plug the diffuser back in and run it for 10 to 15 minutes. Then, unplug it, empty the solution, and wipe down the reservoir with a soft cloth.

Wipe the ultrasonic plate with a cotton swab dipped in rubbing alcohol, and wipe down the exterior of the unplugged diffuser with a cloth dampened with plain water. Finally, reassemble the diffuser and plug it in.

Perform a deep clean at least once a month to prevent dust and build-up from affecting your diffuser's performance.

Frequently asked questions