A Guide To Using Your Aroma Electric Kettle

Aroma electric kettles are designed with intuitive one-touch controls, allowing you to set the perfect temperature for your tea or coffee without overheating. The kettles are made of stainless steel and have a stylish finish. They feature a cordless pouring design for easy serving and automatically switch off when the water reaches its boiling point. To clean your kettle, simply use a soft sponge with warm, soapy water, ensuring that you do not immerse the kettle in water to avoid electrical shock and irreversible damage.

How to clean an Aroma electric kettle

To clean an Aroma electric kettle, you'll need to address both the interior and exterior of the kettle. Here's a step-by-step guide:

Cleaning the Interior of the Aroma Electric Kettle:

• Combine Water and a Cleaning Agent: Fill the kettle with water and add a cleaning agent such as white vinegar, lemon juice, citric acid, or baking soda. The ratio of water to the cleaning agent may vary depending on the chosen agent. For vinegar, use equal parts; for lemon juice or citric acid, use enough to cover the bottom; and for baking soda, use 1-2 tablespoons.
• Boil the Mixture: Turn on the kettle and bring the mixture to a boil.
• Let the Mixture Sit: Turn off the kettle and let the mixture sit for about 20 minutes to an hour. For severe scaling, you can even let it sit overnight.
• Drain and Rinse: Carefully drain the kettle and rinse it with water several times to remove any residue and odour of the cleaning agent. If needed, boil plain water in the kettle, then discard it, and repeat until there's no lingering smell or taste.
• Scrub Gently (if necessary): If there are any remaining mineral deposits or scaling, use a soft, non-abrasive sponge or microfiber cloth to gently scrub the inside of the kettle. Rinse again with clean water.

Cleaning the Exterior of the Aroma Electric Kettle:

• Wipe Down with a Damp Cloth: Use a damp, soft cloth to wipe down the exterior of the kettle, removing any water splashes, residue, or grease stains. Avoid getting soap or water inside the kettle, as it can damage the electrical components.
• Dry and Polish: After wiping down the exterior, use a soft, dry cloth to dry and polish the surface, leaving it spotless and shiny.

Additional Tips for Maintaining Your Aroma Electric Kettle:

• Descaling and cleaning your kettle regularly is essential. Aim to clean it daily and descale about once a month, depending on the hardness of your water.
• To descale the kettle, you can use specialised descaling solutions or opt for household ingredients like vinegar, lemon juice, citric acid, or baking soda.
• Always refer to your Aroma electric kettle's user manual for specific care and cleaning instructions.

How to boil water with an Aroma electric kettle

Step 1: Plug in the Kettle and Open the Lid

The Aroma electric kettle is a convenient way to boil water. Start by plugging the kettle into a power outlet. Then, open the lid by pressing the button on the handle.

Step 2: Fill the Kettle with Water

Fill the kettle with the desired amount of water. The Aroma kettle has a maximum capacity of 1.0L or 4 cups of water. There is a fill line inside the kettle that you should not exceed.

Step 3: Close the Lid and Press the Power Button

Once you have filled the kettle, close the lid securely. There is a button on the handle that you can press to close the lid tightly. Then, simply press the power button, and the kettle will start boiling the water.

Step 4: Wait for the Water to Boil

The Aroma electric kettle boils water at a cup-a-minute speed, so you won't have to wait long. The kettle will automatically shut off once the water reaches the boiling point, so you don't have to worry about overboiling or manually turning it off.

Step 5: Pour the Boiled Water

When the kettle has finished boiling, carefully open the lid and pour the hot water into your cup or container. The Aroma kettle has a cordless pouring feature, making it easy and convenient to serve.

Tips:

• The Aroma electric kettle has a mesh filter at the pouring spout. This filter is essential for the proper operation of the kettle, as it minimizes steam escape and prevents mineral scale from being poured out with the water.
• Do not place tea leaves or tea bags directly into the kettle to steep. The kettle should only be used for boiling water. Steeping tea directly in the kettle may stain or damage the interior.
• To clean the kettle, use a soft sponge with warm, soapy water. Rinse and dry the kettle thoroughly before placing it back on the power base. Do not immerse the kettle in water to avoid electrical shock and damage.

How to fix a broken lid on an Aroma electric kettle

If the lid on your Aroma electric kettle won't close, you can try the following fixes.

First, check if there is a rattling part inside the lid, as this could indicate a loose screw. If so, carefully pry the top of the lid from the bottom section using a butter knife to wedge between the silicone gasket and the underside of the top section. Once the top section is removed, you may be able to tighten or fix the loose part.

If your kettle is a newer model (2019+), it may have no screws in the lid. In this case, the issue could be related to the spring mechanism that keeps the catch extended. When the spring's small post breaks, the catch will no longer slide forward under the kettle rim to hold the lid closed. To fix this, you can follow these steps:

• Carefully pry open the top of the lid from the bottom section, using a butter knife as mentioned above.
• You will then see the stainless steel spring, where the small post has broken off.
• Heat a straight pin red hot and push it through the tall lip on the lid base that the top snaps onto. Push the pin through just to either side of the small pin that holds the silicone gasket.
• Reattach one side of the spring to the catch mechanism, and loop the other end through the pinhole you made in the lip.
• Take a sharp knife and make a single cut in the top section lip that aligns with the spring you installed on the bottom section lip.
• The spring on the lower lip will slip into the cut, allowing you to snap the top lid section back onto the bottom lid section.

If your kettle has screws, you can try unscrewing the two screws under the lid. Inside, you will find the latch, a spring, and two levers. Reset these in the proper position and then reassemble the lid. If the spring is missing or damaged, you may need to cut a spring from a pen or another source as a replacement.

For the Aroma ARC-914SBD model, the lid can be removed by first removing the condensation catcher by pinching it on both sides and pulling it away from the cooker. Then, use a Phillips head screwdriver to remove the screw behind the condensation catcher. Gently remove the piece that was held in place by the screw, exposing the hinges for the lid. To remove the hinge, gently rotate the bottom of the rod upwards and then push it inward to pull the rod out. Repeat for each rod, and the lid should come off.

How to use the Keep Warm mode on an Aroma electric kettle

The Keep Warm mode on an Aroma electric kettle is a handy feature that can be used to keep water at a set temperature for a period of time. This is useful if you want to brew tea at the optimal temperature for the best flavor or if you need hot water for other purposes like cooking or making instant coffee or oatmeal. Here's a step-by-step guide on how to use the Keep Warm mode on your Aroma electric kettle:

• Fill the Kettle with Water: Start by filling the kettle with the desired amount of water. Most Aroma electric kettles have a maximum capacity of around 1.7 liters or 7 cups.
• Select the Temperature: Choose the desired temperature setting based on your needs. Different tea varieties require different brewing temperatures, so adjust the temperature accordingly. You can also refer to your tea's packaging for the recommended brewing temperature.
• Start Heating: Once you've set the temperature, press the "Start" button. The kettle will begin heating the water.
• Automatic Keep Warm: After the water reaches the desired temperature, the kettle will automatically enter the Keep Warm mode. This mode will maintain the set temperature for a certain period, usually around 20 to 30 minutes. During this time, you can lift the kettle off the base to pour a cup of hot water without interrupting the Keep Warm cycle.
• Manual Keep Warm Activation: If you want to activate the Keep Warm mode manually, you can do so by pressing the "Keep Warm" button. This is useful if you want to maintain a specific temperature for a longer period.
• Deactivating Keep Warm: To turn off the Keep Warm mode, simply press the "Keep Warm" button again. The kettle will then shut off automatically.

It's important to note that the Keep Warm function may not keep the water at the exact set temperature but might maintain it at a slightly lower temperature. This is done to ensure quicker boiling the next time you use the kettle. Additionally, always refer to your specific Aroma electric kettle model's manual for detailed instructions, as the steps may vary slightly between different models.

How to find the model number of an Aroma electric kettle

To find the model number of an Aroma electric kettle, look for the manufacturer's sticker on the backside or bottom of your appliance. The model number is typically a 6-7 character code in the format of XXX-XXXX and will begin with "AWK" followed by a hyphen and 3-4 numbers and/or letters.

• Turn over the kettle: Start by turning over your Aroma electric kettle so you can access the bottom side.
• Locate the manufacturer's sticker: Look for a sticker or label that displays information about the manufacturer and the product. This sticker is usually found on the bottom or backside of the kettle.
• Identify the model number format: On the sticker, look for a code that matches the format XXX-XXXX, where X represents a number or letter. The model number for Aroma electric kettles typically starts with "AWK" followed by additional characters.
• Note the model number: Once you've found the code that matches the described format, take note of the entire sequence of characters. This is your Aroma electric kettle's model number.

By finding the model number, you can easily access the product manual, register your appliance for warranty purposes, or purchase compatible replacement parts. It's always helpful to know the model number of your appliance when seeking support or maintenance services.

Frequently asked questions