Mastering The Breville Aroma Style Coffee Machine

how to use a breville aroma style coffee machine

The Breville Aroma Style Electronic Drip Coffee Maker is a programmable coffee machine that can be set to automatically brew coffee at a later time within a 24-hour period. It features a non-drip valve system, allowing users to interrupt the brewing cycle before the entire carafe has finished filling. The machine also has a brew strength control function, allowing users to adjust the brew strength from regular to strong. With its stainless steel mesh filter basket, the Breville Aroma Style aims to deliver optimal flavour extraction from finely ground coffee.

shunscent

Setting the clock to the time of day

To set the clock to the time of day on your Breville Aroma Style Coffee Machine, follow these steps:

  • Ensure your machine is switched off at the power outlet.
  • Insert the plug into a 230/240V power outlet.
  • Switch on the power at the outlet.
  • Confirm your auto-brew start time by pressing the 'PROGRAM' button. The pre-set time will be displayed.

Now, you can program your coffee maker to automatically brew coffee at your desired time within a 24-hour period. This feature ensures you can wake up to a freshly brewed cup of coffee in the morning or set it to have a hot cup of coffee ready for you when you return home after a long day.

shunscent

Adjusting brew strength

Adjusting the brew strength on your Breville Aroma Style coffee machine is simple. The machine allows you to adjust the brew strength from regular to strong at the touch of a button.

To adjust the brew strength, simply press the 'PROGRAM' button. This will allow you to customise your coffee strength to your desired preference.

It is worth noting that the machine has a minimum size of two cups or roughly one mug of coffee. When adjusting the brew strength, ensure that you have the correct amount of water in the machine.

Additionally, the type of coffee beans or grounds used can also impact the brew strength. For a stronger cup of coffee, consider using a darker roast or a finer grind. You may also want to experiment with different ratios of coffee to water to find your preferred taste.

Remember to refer to the user manual for more specific instructions on adjusting the brew strength, as well as other useful information on maintaining and operating your Breville Aroma Style coffee machine.

shunscent

Using the non-drip valve

The non-drip valve on the Breville Aroma Style Coffee Machine is a useful feature that gives you control over the brewing cycle. This is how you can use it:

Firstly, understand what the non-drip valve does. This valve is designed to prevent dripping and spillage during the brewing process. It allows you to pause or interrupt the brewing cycle before the entire carafe has finished filling. This means you can customise the amount of coffee brewed to your desired quantity.

Secondly, locate the non-drip valve on your machine. It is usually positioned near the base of the machine, close to where the coffee is dispensed. The valve might have a small lever or button to activate it.

To use the non-drip valve effectively, follow these steps:

  • Prepare your coffee machine by filling the water reservoir and adding coffee grounds as per your usual brewing process.
  • Initiate the brewing cycle as you normally would.
  • Keep an eye on the carafe as it begins to fill with coffee. When it reaches your desired amount, you can use the non-drip valve to stop the brewing process.
  • Locate and activate the non-drip valve. Depending on your machine's model, you might need to press a button, flip a switch, or turn a knob.
  • By activating the non-drip valve, the flow of coffee from the machine will stop. You can then remove the carafe and serve your coffee without worrying about drips or spills.
  • Remember to resume the brewing cycle if you wish to brew more coffee. Simply deactivate the non-drip valve, and the machine will continue the brewing process.

shunscent

Cleaning and maintenance

Keeping your Breville Aroma Style coffee machine clean is essential for two main reasons. Firstly, a clean machine will produce better-tasting coffee. Secondly, regular cleaning will ensure your machine lasts longer.

Breville machines have a handy indicator light that lets you know when it’s time to give your machine some attention. However, you should perform some basic maintenance every time you use your machine to keep it in good working order.

Everyday Maintenance

  • After each use, empty the drip tray to prevent build-up over time.
  • After using the steam wand, make sure to empty the line of any residual milk by running it on the steam setting until no more liquid comes out. Then, after the wand has cooled, wipe the outside with a soft cloth to remove any backsplash. Also, use the steam wand cleaning tool to clean the tip and ensure there are no blockages.
  • Clear the filter basket by gently tapping the basket over a bin to dislodge leftover grounds, then wash with soap and water.
  • Clean the portafilter by rinsing it under the faucet for a few seconds, then wiping it clean with a clean, dry towel.
  • Check your tamper to ensure it is clean and dry before putting it away to avoid bacterial buildup.

Deep Cleaning

In addition to the above, your Breville Aroma Style coffee machine will require a more thorough clean every 1-2 months.

  • Run a brewing cycle with only water to check for any residual coffee in the group head. The clearer the water, the better.
  • Use the pin tool that came with your machine to clean out the holes in the filter.
  • Change the water filter every 1.5-2 months. Old filters are less effective and can grow mould and bacteria, affecting the taste of your coffee and, in extreme cases, making it unsafe to drink.
  • If your machine has an attached grinder, brush off the burrs and remove as much coffee dust and old grounds as possible. Do not use soap or water to clean your burrs as this will cause them to rust.
  • Run your machine’s built-in cleaning cycle using the cleaning disk and cleaning tablets it came with. Put the cleaning disk in the one-cup filter and place a cleaning tablet in the centre of the disk. Attach the portafilter to the machine as you would to make a shot of espresso. Press and hold the power button, one-cup button, and two-cup buttons simultaneously until the cleaning light flashes to initiate the cleaning cycle.
  • When the machine finishes the cleaning cycle, run another brew cycle using only water to remove any cleaning solution left in the machine.

shunscent

Removing mineral deposits

Mineral deposits from hard water can build up in the water tank and internal tubes of your Breville Aroma Style Coffee Maker. If these deposits are not removed, the brew time will increase.

To remove mineral deposits, follow these steps:

  • Fill the water tank to the maximum mark with white vinegar.
  • Ensure the filter holder is firmly positioned into place. Close the water tank lid.
  • Position the carafe, with the lid on, on the hot plate and switch the Coffee Maker on. Allow the mixture to drip through the machine until the cycle is complete.
  • Once the cycle is finished, empty the carafe and refill the water tank with fresh water. Place the carafe back into position on the hot plate.
  • Switch the Coffee Maker on and allow the fresh water to drip through. Once the cycle is complete, switch the machine off and empty the carafe. Mineral deposits will have been removed from the water tank and internal pipes.
  • Press the on/off button to turn off the machine, switch off the power outlet, and unplug the machine.
  • Ensure all water has been removed from the water chamber. Wash the mesh filter basket, carafe, and lid in warm, soapy water, then rinse and dry thoroughly.
  • Replace all parts back into position in the Coffee Maker and close the water tank lid.
  • Store the Coffee Maker upright on the benchtop or in a cupboard.

Your Breville Aroma Style Coffee Maker is now free of mineral deposits and ready to brew fresh, great-tasting coffee!

Frequently asked questions

To set up your machine, follow these steps: plug the machine into a 230/240V power outlet, set the clock to the time of day, and confirm your auto-brew start time by pressing the 'PROGRAM' button.

To make coffee, follow these steps: add water to the right chamber, scoop ground coffee into the stainless steel filter, insert the filter and coffee pot into the machine, and press the power button.

For one cup of coffee, fill the water marker to just under the line for 3 cups of water and use 2 tablespoons of ground coffee.

You can adjust the brew strength from regular to strong at the touch of a button.

To clean your machine, you can remove mineral deposits by running vinegar and water through it. The stainless steel filter should be rinsed after each use.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment