Easy Steps To Use The 5 Below Aroma Diffuser

To use the 5 Below aroma diffuser, start by placing the diffuser on a flat surface and plugging it in. Remove the lid, fill it with cool water, and add 5-8 drops of your favorite essential oil. Then, press the MIST button to turn on the diffuser and the LED button to turn on the light. You can press the LED button once for a warmer light and twice for a more subtle light. It is recommended to clean your diffuser regularly and avoid leaving any water in the unit for more than 24 hours, as this can affect the essential oil aroma. To clean the diffuser, empty any water away from the air outlet, being careful not to get the electronic base wet. Use a kitchen towel or cloth to wipe the inside of the water tank and remove any oil residue. You can also use a sustainable cotton bud to clean the circular disc at the bottom of the tank and between the rims of the plastic lid.

Choosing a location: Place the diffuser in an open area, on a flat surface, avoiding direct sunlight or fans

When choosing a location for your 5 Below aroma diffuser, it's best to select an open area in a room or office with a solid, flat surface or tabletop. Avoid placing the diffuser directly in sunlight or near a fan, radiator, or other sources of heat, as this will shorten the life of the diffuser. Higher temperatures speed up diffusion, so while you'll get a stronger scent, the diffuser will not last as long.

It's also good to place a placemat or towel underneath the diffuser to protect the surface from water damage. If you're using the diffuser on a wooden surface, this is particularly important.

Adding water: Fill the diffuser's water tank to the fill line with lukewarm/room-temperature water

When using an aroma diffuser, it is important to add water to the tank before adding essential oils. This is because most diffusers use water to transform essential oils into mist droplets, filling a room with a subtle scent.

To add water to your 5 Below Aroma Diffuser, first remove the top of the diffuser. Then, fill the diffuser's water tank with lukewarm or room-temperature water to the fill line indicated on the inside of the tank. If there is no fill line, refer to your diffuser manual for the recommended water amount. It is important not to overfill the tank as this may cause the diffuser to not function properly. Once you have added the correct amount of water, you can proceed to add your essential oils.

Using lukewarm or room-temperature water is important as it ensures that the essential oils retain their therapeutic properties. Water that is too hot can damage the oils, reducing their effectiveness. Additionally, filling the water tank to the correct level ensures that the diffuser functions properly and prevents any potential issues or damage.

By following these simple steps, you can ensure that your 5 Below Aroma Diffuser functions optimally and provides you with the desired aromatic benefits.

Adding oils: Put 3-10 drops of essential oil into the water

Adding essential oils to your diffuser is a simple process, but it's important to get the amount right for the best fragrance experience.

First, unscrew the cap from your chosen essential oil bottle. Then, carefully tilt the bottle and allow 3-10 drops of oil to fall directly into the diffuser's water reservoir. If you're combining different oils, be sure not to exceed a maximum of 10 drops in total. You can always add more oil later if you want a stronger aroma.

For a smaller room, start with 3-4 drops. You can then gradually increase the amount of oil you use until you achieve your desired fragrance strength. It's a good idea to keep track of how many drops you use each time so that you can get a feel for how much oil you need.

Once you've added your oil drops, carefully tilt the bottle back to the upright position and screw the cap back on.

Turning it on: Replace the lid, set features (e.g. night light), and press the power button

To turn on your 5 Below Aroma Diffuser, start by replacing the lid. Once you have added water and essential oil to your diffuser, you will need to replace the lid before turning it on. This is an important step, as it ensures that the diffuser is sealed and can begin to distribute the aroma.

After replacing the lid, you can set the features of your diffuser. Many diffusers come with additional features such as a night light or colour-changing LED lights. If your diffuser has a night light feature, you can turn it on by pressing the power button once for a warmer light or twice for a more subtle light. This can create a relaxing ambiance in your room, especially when using calming essential oils such as lavender or chamomile.

Finally, it is time to press the power button and turn on your diffuser. Usually, the power button is located on the front of the diffuser, and it may be labelled as "Mist" or have a similar indicator. By pressing this button, you will activate the diffuser, and it will start releasing the aromatic mist into the air.

It is important to note that the specific steps to turn on your 5 Below Aroma Diffuser may vary slightly depending on the model you have. Always refer to the manufacturer's instructions for the most accurate information.

Cleaning: Regularly clean with a brush, warm water, and rubbing alcohol

Regular cleaning of your 5 Below aroma diffuser will prevent oil residue from building up and keep it functioning properly. It is recommended to clean your diffuser after every use and give it a deep clean once a month.

Unplug the Diffuser

Before cleaning, make sure to unplug the diffuser from the power outlet. This is a safety precaution as it is hazardous to keep the diffuser plugged in while cleaning.

Empty the Reservoir

Pour out any water or oil left in the reservoir. This step is crucial as standing water can lead to the development of mold and mildew spores.

Clean the Reservoir

Use a soft cloth or paper towel dampened with warm water and a mild soap or vinegar to wipe out the diffuser's interior. This will prevent oil buildup and corrosion on the diffuser's parts. Rinse the reservoir with clean water to remove any soapy residue and dry it using a microfiber cloth or a dry paper towel.

Clean the Ultrasonic Plate

The ultrasonic plate or chip breaks down the oils for dispersion into the air. Use a cotton swab or a small brush dipped in rubbing alcohol to gently rub the plate, removing any excess oil buildup.

Reassemble and Dry the Diffuser

Wipe the diffuser with a dry cloth or paper towel to ensure there is no moisture left. Reassemble the diffuser and let it air dry completely before using it again.

Frequently asked questions