Resetting Aroma Mining World: A Step-By-Step Guide

Aroma1997's Dimensional World is a Minecraft mod that adds a new dimension designed for mining and quarries. To reset the Aroma mining world, you need to delete the corresponding dimension folder. The dimension number can be found at the top of the config file, which is usually DIM6 or DIM-2. Alternatively, you can delete the DIMX folder in the world folder, where X is the dimension ID of the mining world, which can be found in the mining world config file.

Delete the dimension folder

To reset the Aroma Mining World, you need to delete the dimension folder. The dimension number is listed at the top of the config file. By default, the dimension number is DIM6, but it may be DIM-2 if you are playing Beyond.

To find the correct dimension folder to delete, you need to refer to the mining world config file. This will tell you the dimension ID, which is usually -6 or 6, but can be a different number depending on your setup. Once you have identified the correct dimension folder, simply delete it.

For example, if your mining world config file shows the dimension ID as 6, you would delete the DIM6 folder. Alternatively, if your config file shows -6 as the dimension ID, you would delete the -6 folder.

Deleting the dimension folder will reset the Aroma Mining World, allowing you to start fresh with a new world generation.

Find the dimension number

To reset the Aroma Mining World, you will need to find the dimension number. This is important because it will allow you to locate the correct dimension folder to delete. The dimension number is usually listed at the top of the config file.

To find the dimension number, follow these steps:

• Open the config file for the Aroma Mining World mod. This file should contain various settings and options for the mod.
• Look at the top of the config file. The dimension number is typically listed here. It may be labelled as "DIM" followed by a number, such as DIM6 or DIM-2.
• Note down the dimension number. This number represents the unique identifier for the Aroma Mining World dimension.
• Once you have the dimension number, you can proceed to locate and delete the corresponding dimension folder.

It is important to note that the dimension number may vary depending on your specific modpack or Minecraft version. The default dimension number is usually DIM6, but it can be different in certain modpacks, such as "Beyond" where it is DIM-2. Always refer to your config file to find the correct dimension number for your setup.

Locate the DIMX folder

To reset the Aroma Mining World, you will need to locate the DIMX folder in the world folder. The "X" in DIMX stands for the dimension ID of the mining world. This dimension ID can be found in the mining world configuration file. Once you have located the correct DIMX folder, simply delete it. This will reset the Aroma Mining World.

• Understand the Folder Structure: The world folder contains multiple subfolders, each representing a different dimension in the game. The DIMX folder is located within this world folder. The "X" in DIMX is a placeholder for the specific dimension ID, which will be a number. For example, you might see folders named DIM1, DIM2, or DIM6, depending on the dimensions present in your game.
• Check the Mining World Configuration File: To find the correct DIMX folder, you need to know the dimension ID of the mining world. Open the mining world configuration file, which should be located in the same directory as the world folder. This file will contain information about the mining world, including its dimension ID. Look for a line that specifies the dimension number or ID. This is the "X" value you need.
• Navigate to the World Folder: Now that you have the dimension ID, navigate to the world folder. This folder contains the subfolders for each dimension. It may be named something like "worlds" or "dimensions." Depending on your game version and setup, the world folder may be located in different places. If you're having trouble finding it, try searching for "world" or "dimension" in your game's installation directory or its parent folders.
• Locate the Correct DIMX Folder: Within the world folder, look for the folder that matches the dimension ID you found in the configuration file. For example, if the mining world has a dimension ID of 6, you would look for a folder named DIM6. This is the DIMX folder you need to reset the Aroma Mining World.
• Confirm the Contents: Before proceeding, you can double-check that you've found the correct folder. Open the DIMX folder and examine its contents. You should see files and subfolders related to the mining world, such as terrain data, player data, and other configuration files specific to that dimension.
• Backup (Optional but Recommended): Before making any changes, it's always a good idea to create a backup of the folder. This will allow you to restore the mining world to its current state if needed. Simply copy the entire DIMX folder and paste it into a safe location, such as a backup folder on your computer or an external hard drive.

Once you have located and confirmed the DIMX folder, you can proceed with deleting it to reset the Aroma Mining World. Remember that this action cannot be undone, so ensure you have a backup if you want the option to restore your progress.

Remove the old DIM-6 folder

To reset the Aroma Mining World, you must first locate the dimension folder. The dimension number is listed at the top of the config and should be DIM6 by default, or DIM-2 if you are playing Beyond. Once you have located the correct dimension folder, you can proceed to delete it.

In the case of Aroma's Mining Dimension, the folder path will typically be ".../world/DIM-6". It is important to note that the number after "DIM" may vary depending on your configuration. To ensure you are deleting the correct folder, cross-reference the dimension number in the folder path with the one listed at the top of your config file.

Before deleting the DIM-6 folder, it is recommended to verify that it corresponds to Aroma's Mining Dimension. This can be done by checking the contents of the folder. You should find files related to the mining world, such as chunk data, player data, and possibly mod-generated structures. If you are unsure, it is advisable to back up the folder before proceeding with the deletion.

Once you have confirmed that you have the correct folder, you can proceed with the deletion. Simply select the DIM-6 folder and move it to your recycling bin or trash, depending on your operating system. Alternatively, you can right-click on the folder and choose the "Delete" option. This will remove the old DIM-6 folder and its contents, allowing you to reset the Aroma Mining World.

After deleting the folder, you may need to restart your game or server for the changes to take effect. Keep in mind that deleting the DIM-6 folder will result in the loss of any progress or changes made within that specific dimension. If you wish to preserve any structures or items within the mining world, it is recommended to back up the folder before proceeding with the deletion.

Use the DimensionChanger

To reset the Aroma Mining World, you can use the DimensionChanger. This tool allows you to modify the configuration of your mining dimension, including resetting it to its default state. Here's a step-by-step guide on how to use the DimensionChanger:

Step 1: Locate the Dimension Folder

The first step is to find the folder for the dimension you want to reset. The dimension number is usually listed at the top of the config file. For the Aroma Mining World, the default dimension is DIM6, but it may be DIM-2 if you're playing the Beyond version. Navigate to this folder within your Minecraft files.

Step 2: Backup Your World

Before making any changes, it's always a good idea to create a backup of your world. This will ensure that if anything goes wrong during the reset process, you can restore your world to its previous state. Simply copy the entire world folder and paste it into a safe location outside of your Minecraft folder.

Step 3: Delete the Dimension Folder

Once you have a backup, you can proceed to delete the dimension folder. This will remove all the files associated with that particular dimension, allowing you to start fresh. Right-click on the folder and select "Delete" or "Remove." Confirm the action when prompted.

Step 4: Restart Your Game

After deleting the dimension folder, restart your Minecraft game. This will allow the game to regenerate the dimension with default settings. If you've made any changes to the config file, such as modifying the world height or ore density, those changes will also take effect when you restart the game.

Step 5: Verify Changes

Load your world and enter the Aroma Mining Dimension to verify that the changes have taken effect. You should see a freshly generated world with default settings. If you had made any modifications to the config file, check to ensure that those changes are reflected in the regenerated dimension.

Using the DimensionChanger is a straightforward way to reset the Aroma Mining World. By following these steps, you can easily revert the dimension to its default state or apply any desired changes from the config file. Remember to backup your world before making any significant modifications to avoid potential data loss.

Frequently asked questions