Unlocking Pura Fragrance Vials: An Easy Guide To Removing Scents

To remove a Pura fragrance vial, you must first open the Pura app and select the fragrance you wish to replace. Next, select the Swap Fragrance icon and scan the QR code on the back of your new fragrance vial. If scanning is unsuccessful, you can manually enter the three-digit code found on the vial. After verifying that the correct fragrance is detected, select Save and Continue. Finally, remove the fragrance cap and insert the new fragrance into your Pura diffuser until you hear a click.

Remove the cap from the Pura fragrance vial

To remove the cap from your Pura fragrance vial, first ensure that your Pura diffuser is set up and positioned upright to avoid spills. Once your diffuser is set up and stable, you can proceed to remove the cap from the fragrance vial.

Grip the cap of the fragrance vial firmly between your thumb and forefinger. Apply gentle pressure and twist the cap in a counter-clockwise direction. Continue twisting until you feel the cap become loose and detach from the vial. Be careful not to apply excessive force to avoid spilling the contents of the vial.

Now that the cap is removed, you can proceed to insert the fragrance vial into your Pura diffuser. Gently insert the vial into the diffuser until you hear a click, indicating that it is securely in place.

It is important to note that the QR code or three-digit code on the backside of the fragrance vial may need to be scanned or entered into your Pura app to verify the fragrance. This step ensures that you have selected the correct fragrance and allows you to adjust fragrance intensity, set schedules, and more.

By following these steps, you can safely remove the cap from your Pura fragrance vial and insert it into your diffuser, filling your space with your desired scent.

Insert the vial into the Pura diffuser until it clicks

To insert a fragrance vial into your Pura diffuser, first, ensure that your diffuser is set up correctly and connected to power. Position your diffuser upright to avoid spills and click 'Continue' on your Pura app. Wait for your diffuser to show a blue light—if it doesn't, hold the reset button for 7 seconds or until the light comes on. Once the light appears, you can proceed by clicking 'Continue' again.

Next, choose your WiFi network and enter your password. Click 'Continue' to connect. Then, click 'Add Fragrances' and allow camera access so you can scan the QR code on your fragrance vial. If you don't want to enable camera permissions, you can always enter the 3-digit code located on the backside of the fragrance vial into your app.

Now, remove the cap from your fragrance vial. Carefully insert the vial into your Pura diffuser. Insert it until you hear a click. This click indicates that the vial is securely in place.

After inserting the vial, you can label which room your diffuser is in and review your settings on the diffuser overview page. Finally, click 'Finish' to complete the setup process.

Scan the QR code on the vial's back

Scanning the QR code on the back of your Pura fragrance vial is a simple process. Firstly, you will need to download and launch the Pura app, creating an account if you haven't already. Once you are signed in, you will be taken to the home screen of the app. To set up a new Pura diffuser, click the button 'Set Up Diffuser'. Ensure your diffuser is set up and plugged into the desired outlet, in an upright position.

Your app will then search for your diffuser. Once it has been found, select 'Continue'. If your diffuser is not found, check your Bluetooth permissions and ensure your diffuser is within range. After your diffuser has been connected, select your WiFi network and enter the password. Your diffuser will light up with a green light once it has been successfully connected to WiFi.

Now, you can add fragrances. You will need to allow camera access to scan the QR code on the back of your Pura fragrance vial. If you do not want to enable camera permissions, you can enter the three-digit code on the back of the vial instead. Once you have scanned the QR code, verify the fragrance by selecting 'Save and Continue'.

After this, you can remove the cap and insert the fragrance into your diffuser. You will then be able to label the room your diffuser is in and review your settings on the diffuser overview page. Finally, select 'Finish' to complete the setup process.

Verify the fragrance on the Pura app

To verify the fragrance on the Pura app, follow these steps:

Firstly, download and launch the Pura app on your phone. You will need to either sign in to your existing account or create a new one to begin setting up your Pura diffuser. Once you are signed in, click on 'Set Up Diffuser' and choose the type of diffuser you are setting up. Position your diffuser upright to avoid spills and click 'Continue'.

Now, wait for your diffuser to show a blue light. If the light does not appear, hold the reset button for 7 seconds or until the light comes on, then proceed by clicking 'Continue'. Choose your 2.4 GHz home WiFi network and enter the WiFi password. Click 'Continue' to connect.

Next, click 'Add Fragrances'. You will be asked to allow camera access, click 'yes' to enable it. This will allow you to scan the QR codes on your fragrance vials to quickly capture fragrance information. If you do not want to enable camera permissions, that is okay; you can always enable it later. As an alternative, you can enter the 3-digit code located on the backside of your fragrance vials into your app.

Scan the QR code or enter the 3-digit code on the fragrance vial. Once you've scanned the QR code, the app will ask you to verify the fragrance. If it is the correct one, select 'Save and Continue'.

Now, remove the cap from the fragrance vial and insert it into your Pura diffuser until you hear a click. Label which room your diffuser will be in, review your settings, and click 'Finish'. You can review your settings in the diffuser overview page. Select 'Finish' to complete your setup process.

Your Pura app will notify you when it's time to replace your vials. You can also monitor usage based on your schedule and intensity settings to estimate when new vials will be needed.

Select 'Save and Continue' on the app

To remove a Pura fragrance vial, you must first select the fragrance you want to replace in the Pura app. Then, select the "Swap Fragrance" icon. Next, scan your new fragrance by scanning the QR code on the back of the fragrance vial or by entering the three-digit code on the back of the vial.

Once you've scanned the new fragrance, the app will ask you to verify that the information is correct. If it is, select "Save and Continue". After selecting "Save and Continue", click "Continue" again, and you're finished!

It is important to note that you should not unplug the diffuser while performing this action, as your diffuser must receive power to stay connected.

Frequently asked questions