Mastering The Starbucks Barista Aroma Grande: A Step-By-Step Guide

The Starbucks Barista Aroma Grande is a 12-cup coffee maker with a 24-hour programmable feature and an automatic shut-off. It has a digital clock, a removable water tank, and a time since brewed mode. The machine heats water to an ideal temperature for brewing coffee, and the thermal tumbler keeps the coffee hot for hours. This guide will take you through the steps to program your Starbucks Barista Aroma Grande coffee maker.

Setting the clock

To set the clock on your Starbucks Barista Aroma Grande coffee maker, follow these steps:

• Press and hold the Program button (18) until the time flashes and you hear two beeps. The autotimer clock and the Auto-on light will flash.
• Press the H and M buttons (16 and 17) until the display shows the current time. You can set the hour by pressing and holding the H button, and the minute by pressing and holding the M button.
• After setting the correct time, release either button. The time will stop flashing and is now set. Note that the clock display (15) will show either AM or PM at the top left.

These steps will allow you to set the clock on your Starbucks Barista Aroma Grande coffee maker to the correct time, ensuring that your coffee maker is ready for use.

Resetting the clock

To reset the clock on your Starbucks Barista Aroma Grande, follow these steps:

Firstly, press and hold the 'H' button to set the hour. You will know the hour has been set when the time stops flashing and is set. AM or PM will be indicated at the top left of the clock display.

Secondly, press and hold the 'M' button to set the minute. Again, you will know the minute has been set when the time stops flashing and is set.

It is important to note that you have five seconds after releasing either button to set the hour or minute before the time automatically sets.

These steps can also be applied to the Starbucks Barista Aroma Solo machine.

Programming the automatic timer

The Starbucks Barista Aroma Grande 12 Cup Coffee Maker is a stainless steel coffee maker that features a digital clock with an automatic programming button. It offers 24-hour programmability and auto shut-off.

To program the automatic timer on the Starbucks Barista Aroma Solo coffee maker, follow these steps:

• Press and hold the "Program" button until the time flashes and you hear two beeps. The autotimer clock and the Auto-on light will flash.
• Press the "H" and "M" buttons until the display indicates the desired brewing time. Release the buttons, and after five seconds, the time will stop flashing, and the display will return to the current time.
• Press the "Auto On" button. The Auto On light will illuminate, indicating that the automatic timer has been successfully set. When the programmed time is reached, the coffee maker will initiate the brewing process.

It is important to note that before programming the automatic timer, ensure that the machine is prepared to brew coffee by following the steps outlined in the "How to Brew Coffee" section of the user manual. Additionally, set the clock to the present time if you haven't already done so.

With the automatic timer feature, you can program your Starbucks Barista Aroma Grande coffee maker to brew a delicious cup of coffee at your preferred time, ensuring a fresh and hot beverage whenever you need it.

Troubleshooting

This troubleshooting guide is designed to help you resolve issues with your Starbucks Barista Aroma Grande coffee maker.

Problem: The machine is not working.

Possible Causes: The coffee maker is not plugged in or the power source fuse in the outlet is not functioning.

Solution: Plug the coffee maker in and/or turn it on. Check the power source fuse and replace it if necessary.

Problem: Coffee is overflowing from the reserve.

Possible Cause: The amount of water poured in is more than 50-60% of the mug's capacity.

Solution: Reduce the amount of water to 50-60% of the mug's height to avoid overflow.

Problem: Small coffee grounds are ending up in the brewed coffee.

Possible Cause: The strainer has vertical slits, allowing small grounds to pass through.

Solution: Pulse the coffee grounds instead of grinding them thoroughly, or consider replacing the strainer if it is worn out.

Problem: The machine is not brewing coffee as expected.

Possible Causes: The machine needs to be descaled, or the water reservoir is empty.

Solution: Descale the machine by running a solution of vinegar and water through the brewing cycle, then rinse with fresh water. Ensure the water reservoir is filled with fresh, cold water.

Problem: Broken parts or machine not turning on.

Possible Cause: Malfunctioning parts or electrical issues.

Solution: Contact Starbucks Warranty Services at (800) 334-5553 for assistance and replacement parts.

For further assistance with your Starbucks Barista Aroma Grande coffee maker, refer to the user manual or contact Starbucks customer support.

Cleaning the coffee maker

To clean the Starbucks Barista Aroma Grande coffee maker, follow these steps:

Firstly, always ensure the machine is unplugged and has cooled down before cleaning. Then, wipe down the exterior of the machine, including the thermal tumbler, with a damp cloth. Be sure to dry the machine thoroughly after wiping it down. Do not use harsh cleaning agents, especially those containing alcohol, solvents, or abrasive materials.

To clean the machine internally, you will need to descale it. Water carries minerals and impurities that can clog the internal plumbing and impact the heating time, heating process, machine performance, and overall taste of the coffee. To descale the machine, create a two-cup solution of one cup of white vinegar and one cup of cold water. Flip open the splash-proof lid on the tumbler cover and lock it into the "open" position. Push the thermal tumbler into the brewing area of the coffee machine. Once the solution has passed through the machine, discard it and allow the machine to cool for at least 15 minutes. Hand wash and rinse the water reservoir and thermal carafe with warm water. Refill the reservoir with fresh cold water and repeat the process until there is no vinegar or lemon smell from the water. It usually takes two to three rinse brews for the machine to be fully descaled and ready for use.

Frequently asked questions