Unlocking Air Wick Refills: A Step-By-Step Guide

Air Wick's Essential Mist Diffuser is a compact, cordless, and battery-operated device that fills a room with a fragrant mist infused with natural essential oils. The diffuser is powered by an electrical circuit generated by 3 AA batteries and offers three fragrance intensity settings. To open and insert a refill, first, twist to remove the base cover and insert the batteries. Next, remove the refill cap and push the refill bottle upright until you hear a click. Finally, replace the base cover, turn on the device, and select your desired intensity setting.

Using a flat-head screwdriver to slowly pry open the refill bottle

To open an Air Wick Essential Mist refill bottle, you will need a small flat-head screwdriver. This is a tool with a relatively flat and wide head, perfect for prying. First, locate the clear cap on the refill bottle. This is the part that you will need to slowly pry up and eventually pop open.

Now, take your flat-head screwdriver and slide the head under the clear cap. You may need to wiggle the screwdriver a little to get some leverage. Once you feel that the screwdriver is wedged under the cap, start to slowly apply upward pressure. It is important to go slowly here, as too much force could result in the plastic breaking. As you apply this upward pressure, you should feel the cap starting to slide up the neck of the bottle. Keep going until you hear a pop, which indicates that the cap has come free.

At this point, you should be able to simply lift off the cap, revealing the inside of the bottle. You can now fill the bottle with your desired blend. However, it is important to note that pure essential oils will not work, as they are too thick. Instead, you will need to blend them with a suitable carrier oil.

Refilling the bottle with your own scent

To open the Air Wick Essential Mist Aroma Refill bottle, you will need to first remove the plastic lid. Then, firmly push the refill bottle upright into the head of the device until you hear a clicking noise. This will indicate that the refill bottle is secured in place.

If you are looking to refill the bottle with your own scent, it is important to note that Air Wick does not advise using other refills with this device as safety evaluations and toxicology reviews have not been performed on any refills other than those designed by Air Wick.

However, if you choose to proceed with refilling the bottle with your own scent, here are the steps you can follow:

• Remove the plastic lid from the refill bottle.
• Pull out the wick from the refill bottle. Be gentle to avoid spilling any remaining fragrance.
• Rinse the wick under running water to remove any residue of the previous fragrance. Alternatively, you can replace the wick with a new one.
• Fill the refill bottle with your desired fragrance or essential oil blend. Ensure that the liquid you use is safe for use in a diffuser and will not cause any harm or toxicity issues.
• Reinsert the wick into the refill bottle, ensuring it is fully saturated with your chosen fragrance.
• Firmly push the refill bottle upright into the head of the device until you hear a click, indicating it is secured in place.

Please note that by refilling the bottle with your own scent, you are doing so at your own risk, and Air Wick may not be held responsible for any issues arising from the use of non-Air Wick refills. It is also important to follow general safety guidelines when handling fragrances or essential oils, such as avoiding contact with eyes and skin, and keeping out of reach of children and pets.

Removing the refill cap and inserting the refill bottle

To remove the refill cap and insert the refill bottle, follow these steps:

First, ensure that the device is turned off and directed away from your face. This is an important safety precaution. Next, open the device by holding the shroud firmly in one hand and placing the other hand underneath the base as support. Using the thumb of the hand holding the shroud, push down from the top. You should now see the refill bottle and batteries.

Now, it's time to remove the old refill. Gently pull it downwards and away from the top of the device. Take your new refill bottle and remove its plastic lid. Be careful not to damage the wick, as this is what will release the fragrance. With the wick exposed, push the refill bottle upright into the head of the device firmly. You will hear a clicking sound when it is correctly and fully inserted.

Once the new refill is securely in place, you can close the device by replacing the shroud. Simply push it gently down onto the base until you hear a click. Now, you're almost ready to enjoy your new fragrance!

Turn on the device using the slider, and the blue light will flash to indicate it is on. Finally, select your desired intensity setting, and your Air Wick Essential Mist Diffuser is ready to fill your room with fragrance.

Replacing the shroud/outer cover

To replace the shroud/outer cover of your Air Wick Essential Mist Diffuser, follow these steps:

• Ensure the device is turned off and directed away from your face.
• Hold the shroud firmly in one hand and place the other hand underneath the base as support.
• Using the thumb of the hand holding the shroud, push down from the top. You should feel the shroud release from the main device.
• Now you can expose the refill bottle and batteries. Check the fragrance level in the refill bottle. If there is still fragrance remaining, ensure the refill bottle is fully inserted into the device.
• If you need to replace the refill, gently pull it downwards away from the top of the device.
• Insert a new refill by removing the plastic lid of the refill bottle, then push the exposed wick in an upward motion into the head of the device. You will hear a clicking noise when it is inserted correctly and fully.
• Once you have replaced the refill or checked the existing one, you can now replace the shroud.
• Turn on the device to your desired setting. The first mist and fragrance should occur after a 7-second delay.

Please note, if your device is not working, it may be due to an incorrectly replaced shroud, which can prevent the release of fragrance. Always ensure the spray nozzle is visible at the top of the device after replacing the shroud.

Knowing when to change the refill

Firstly, the blue LED light at the top of your device will continue to show, but if no mist or fragrance is being released, then it's probably time for a new refill. Depending on the intensity setting you've selected, a refill should last between 16 and 45 days.

Secondly, the device may emit a high-pitched sound at regular intervals to indicate that the refill is empty and that the device requires a new one.

Thirdly, you can open the device by holding the shroud firmly in one hand and placing the other hand underneath the base as support. Then, using the thumb of the hand holding the shroud, push down from the top. You should then be able to see the level of fragrance remaining in the refill bottle. If there is none left, it's time to replace the refill.

Frequently asked questions