A Simple Guide To Filling Your Aroma Diffuser

Filling an aroma diffuser is a simple process, but it can vary depending on the type of diffuser you have. Here's a step-by-step guide to filling an aroma diffuser:

1. Place the diffuser on a flat surface and plug it in if it's electric.

2. Remove the lid from the diffuser.

3. Fill the diffuser with water. Most diffusers specify the use of cool or lukewarm water, and it's important not to exceed the maximum fill line indicated inside the diffuser.

4. Add your chosen essential oil. The number of drops can vary from 2 to 10, depending on the desired intensity and the size of the room. You can also combine different oils but be mindful not to overpower the aroma.

5. Replace the lid on the diffuser and turn it on.

6. Enjoy the aromatic benefits of your diffuser!

It's important to note that different types of diffusers may have specific instructions. For example, reed diffusers and candle diffusers have unique filling and usage instructions. Always refer to the manufacturer's instructions for your specific diffuser to ensure proper usage and care.

Use cool or lukewarm water

When filling an aroma diffuser, it is important to use cool or lukewarm water. This is because the temperature of the water can affect the mist output of your diffuser. Using cool or lukewarm water is the best way to ensure that your diffuser produces the desired amount of mist.

For ultrasonic diffusers, using tap or bottled water is recommended as the natural minerals in the water allow the oil to cling to the particles and disperse further into the air. These minerals are important for helping water turn into vapour. However, using tap water may result in more frequent and thorough cleaning as mineral build-up will occur faster.

Distilled water, on the other hand, is the purest source of water you can use in your diffuser, minimising cleaning time and prolonging diffuser life. However, distilled water is more expensive and does not vaporise as well as water with small amounts of minerals.

Filtered water is another option, striking a balance between tap and distilled water in terms of purity and cost. It has very few impurities and helps the water turn into vapour better than distilled water, while also being less expensive than distilled water.

Ultimately, the type of water you use in your aroma diffuser is up to your personal preference and budget. However, it is important to follow the instructions provided by the manufacturer of your diffuser, as some diffusers may require or work best with different types of water. Additionally, always use cool or lukewarm water to ensure optimal mist output.

Add 3-10 drops of essential oil

Once you've added water to your diffuser, it's time to add your essential oil of choice. The number of drops you add will depend on the size of your diffuser and the type of oil you're using. If you're using a 100ml diffuser, add between 3 to 5 drops of essential oil. For a 200ml diffuser, you can add 6 to 10 drops.

It's important to remember that moderation is key when adding essential oils to your diffuser. Adding too much oil can result in an overwhelming scent, while adding too little may not be enough to scent your space effectively. As you get used to the aroma, you can adjust the amount of essential oil you use to achieve your desired scent effect.

When using multiple oils, it's best to start with just a few drops of each and experiment until you find your favourite blends. Remember to include a base, heart, and top note for the best outcome. For 200ml of water, you might use 3 drops of your top note, 5 drops of your middle note, and 2 drops of your base note.

The quality of the essential oil also makes a difference. If you're using 100% pure essential oil, you will need fewer drops than if you were using a lower quality or diluted oil. For example, Wintergreen Oil should only be used in small quantities (around 1 drop), whereas you might want to use more drops of Lavender Oil.

Don't overfill the diffuser

To ensure your safety and the longevity of your aroma diffuser, it is imperative that you do not overfill it with water. Here are some reasons why you should avoid overfilling your diffuser:

Prevent Overheating and Damage

When you exceed the maximum fill line in your diffuser, you increase the risk of it overheating. This can cause damage to the internal mechanisms and may even lead to malfunction. By staying within the recommended fill line, you ensure the diffuser operates efficiently without posing any safety hazards.

Avoid Spillage and Mess

Overfilling your diffuser can result in spillage and mess. The excess water may leak out, causing a mess and wasting your precious essential oils. Keeping the water level below the maximum fill line helps prevent accidental spills and ensures your diffuser functions optimally.

Maintain Optimal Diffusion

Adding too much water can affect the diffusion process and the effectiveness of the essential oils. The ideal amount of water creates a misty cloud of scent, enhancing the dispersion of the oils into the air. By not overfilling, you achieve better diffusion and maximize the therapeutic benefits of the essential oils.

Prolong Diffuser Lifespan

Essential oils can build up and cause blockages in the diffuser's mechanisms if not used and maintained properly. Overfilling the diffuser may contribute to this issue, leading to more frequent breakdowns and a shorter lifespan. By using the correct amount of water, you reduce the risk of blockages and prolong the lifespan of your diffuser.

Prevent Water Stagnation

It is recommended to empty your diffuser of any remaining water after each use to prevent stagnation. Stagnant water can affect the essential oil aroma and promote the growth of bacteria. By not overfilling, you ensure that you can easily empty the diffuser after each use, maintaining optimal hygiene and preserving the intended aroma of your essential oils.

Clean regularly

To keep your aroma diffuser in good condition, it's important to clean it regularly. This will prevent build-up, odour, and malfunctions. Here's a step-by-step guide to cleaning your diffuser:

Step 1: Unplug the Diffuser

Always unplug the diffuser and remove any remaining water before cleaning. This is a safety precaution and will prevent any water from getting into the electronic components.

Step 2: Empty and Clean the Reservoir

After each use, empty any remaining water from the reservoir. Standing water can lead to the development of mould and mildew spores. Use a paper towel or a soft cloth to wipe out the interior of the reservoir. If there is any oil residue, you can use a paper towel dampened with distilled white vinegar or an all-natural dish soap to clean the reservoir. Avoid using vinegar if you own a Young Living diffuser, as it will harm the ultrasonic plate and void the warranty.

Step 3: Clean the Ultrasonic Plate or Chip

The ultrasonic plate or chip is a delicate part of the diffuser that breaks down the oils so they can be dispersed into the air. To clean it, use a cotton swab or cotton ball dipped in rubbing alcohol to gently wipe away any excess oil build-up.

Step 4: Dry and Reassemble

Wipe the diffuser with a dry paper towel or soft cloth. Make sure that all components are completely dry before reassembling the diffuser.

Step 5: Deep Clean Once a Month

In addition to your regular cleaning routine, it's recommended to deep clean your diffuser at least once a month. Fill the diffuser halfway with plain water and add 10 drops of distilled white vinegar. Do not use any other type of vinegar or cleaner. Plug in the diffuser and let it run for 10 to 15 minutes. Then, unplug it, empty the solution, and wipe down the reservoir with a soft cloth. Finish by wiping the ultrasonic chip or plate with a cotton swab dipped in rubbing alcohol.

Tips for Regular Cleaning and Maintenance:

• Avoid getting water on the electronic components, such as the air vent opening at the top of the water tank.
• Use room temperature distilled or purified water in your diffuser. Tap water may contain minerals that contribute to build-up.
• Avoid abrasive cleaners or solvents. Mild soap and water are sufficient for cleaning the lid.
• Regularly dust the top and bottom of the diffuser, paying attention to the air vents.
• Always align the lid securely to prevent overflow and leaking.
• Use only pure, therapeutic-grade essential oils to avoid fillers or additives.

Place on a flat surface

When using an aroma diffuser, it is important to place it on a flat surface to prevent anything from spilling or falling over. If you are using a candle diffuser, you will also want to make sure that the diffuser is kept in a safe place to avoid it being knocked over.

If your diffuser needs to be plugged in, make sure your setup is near an outlet. If you are using a candle diffuser, you will need to place it somewhere with a gentle breeze to help distribute the oil aroma.

For electric diffusers, fill a small measuring cup or glass with room-temperature water. Be sure to check for a line or marker inside the tank to indicate how much water to add. Then, simply pour the water into the reservoir.

Frequently asked questions