Unleashing Infinity: Aroma Mining Dimension's Grains

Aroma1997's Dimensional World is a mod that adds a dimension called the Mining Dimension, which has a flatter terrain and more caves than the Overworld. The mod was designed to allow users to mine without ruining the Overworld, as well as being a general test world. To enable grains of infinity in the Aroma Mining Dimension, players can try lighting bedrock on fire using flint and steel and letting it burn out naturally. However, it is important to note that the default config only allows grains of infinity to spawn in the Overworld, so players may need to change the config settings to enable spawning in other dimensions.

Ensure a flat piece of bedrock

To enable grains of infinity in the aroma mining dimension, it is important to ensure a flat piece of bedrock. Here are some detailed steps and considerations to achieve this:

First, locate a suitable area to start your mining operation. Use tools and resources to identify a large, flat expanse of land where you can begin digging. Utilise surveying equipment or in-game mechanisms to determine the boundaries of your mining area. Mark the perimeter of your mining site to ensure a focused and efficient process.

Once you have identified the location, start digging with precision. Use appropriate mining tools, such as pickaxes or specialised equipment, to break through the surface and reach the bedrock below. Exercise caution and follow standard mining safety procedures to avoid accidents or instability in the mining shaft.

As you excavate, maintain a consistent depth and strive for a level surface. Regularly measure the depth from the initial surface level to ensure you are not digging too deep or creating an uneven base. Take measurements at multiple points to cross-reference and confirm the flatness of the exposed bedrock. Use levelling tools and optical devices to fine-tune the smoothness of the exposed surface.

Ensure proper lighting throughout the mining process, especially when approaching the bedrock layer. Visual clarity is essential to identify any minor imperfections or deviations in the flatness of the bedrock. Use mining helmets, portable lights, or strategically placed illumination sources to eliminate shadows and gain a clear view of the exposed rock surface.

Once you have reached the bedrock, thoroughly examine the exposed area. Look for any cracks, crevices, or irregularities that might affect the flatness of the surface. Use appropriate tools to smooth out minor imperfections and create a more uniform bedrock plane. If necessary, employ power tools or specialised machinery to achieve a flatter surface, being cautious not to cause any unintended damage.

Finally, perform a comprehensive assessment of the exposed bedrock. Utilise precision instruments, such as spirit levels, laser levels, or advanced levelling equipment, to confirm that the surface is uniformly flat. Take measurements at various points and compare them to ensure consistency. Achieving a flat piece of bedrock is crucial for successfully enabling grains of infinity in the aroma mining dimension.

Use flint and steel

To enable grains of infinity in the Aroma Mining Dimension, you must first understand how to obtain these items. Grains of Infinity are made by lighting Bedrock on fire and letting it go out naturally. This process has a 50% chance of succeeding.

To increase your chances of obtaining Grains of Infinity, it is recommended to use flint and steel to light the Bedrock on fire. Here are some detailed instructions on how to use flint and steel effectively for this purpose:

Using Flint and Steel to Enable Grains of Infinity

• Ensure you have a sufficient supply of flint and steel. The process of obtaining Grains of Infinity may require multiple attempts, so having extra flint and steel on hand is advisable.
• Locate a relatively flat piece of Bedrock. While some players have reported success in obtaining Grains of Infinity without this step, having a flat surface seems to increase the chances of success.
• Use your flint and steel to light the Bedrock on fire. The fire must be allowed to burn out naturally, so be sure to give it enough time to do so.
• Once the fire has burned out, carefully observe the area for any Grains of Infinity that may have spawned. They are known to make a distinct sound effect when they pop out, so keep your ears open.
• Repeat the process as needed. If you do not obtain any Grains of Infinity on your first attempt, try again. The process is somewhat random, so persistence is key.
• If you are still unsuccessful, you may need to adjust your configuration settings. In the Ender IO config, navigate to enderio>items>infinity powder. Here, you can adjust the "enableInAllDimensions" setting to "true". This will increase the likelihood of Grains of Infinity spawning in the Aroma Mining Dimension.
• Additionally, you can modify other settings such as the spawn chance and the minimum age of the fire required for Grains of Infinity to spawn. Adjusting these settings may require some trial and error, but it can increase your chances of success.

Remember that the process of obtaining Grains of Infinity is somewhat unpredictable, and even with the proper settings and a flat Bedrock surface, there is still a chance that you may not obtain any on your first few attempts. Persistence and patience are key, so don't be discouraged if you don't succeed right away.

Let fires go out naturally

To enable grains of infinity in the Aroma Mining Dimension, you will need to light a piece of bedrock on fire using flint and steel and then let the fire burn out naturally. It is important to note that the default configuration settings for grains of infinity specify that they will only spawn in the Overworld. Therefore, you may need to adjust the configuration settings to enable their spawn in the Aroma Mining Dimension.

• Find Bedrock: Locate an area in the Aroma Mining Dimension where you can find bedrock. This is typically found at the lowest levels of the world.
• Create a Flat Surface: It is recommended to create a relatively flat surface on the bedrock. While some players have reported success without this step, a flat surface seems to increase the chances of grains of infinity spawning.
• Light the Bedrock on Fire: Use flint and steel to ignite the bedrock. You may need to use multiple flint and steel items, as the fire needs to burn for a certain duration.
• Allow the Fire to Burn Out Naturally: This is crucial. Do not attempt to extinguish the fire manually. Simply wait for it to burn out on its own.
• Check for Grains of Infinity: Once the fire has gone out, examine the area for grains of infinity. They should have a distinct appearance and make a sound when they pop out of the extinguished fire.
• Adjust Configuration Settings (Optional): If grains of infinity do not spawn in the Aroma Mining Dimension, you may need to adjust the configuration settings. Locate the Ender IO config file and navigate to "enderio>items>infinity powder". Here, you can modify settings such as the spawn chance, enablement in all dimensions, and the minimum age of the fire for grains to spawn.
• Avoid Dispensers: Dispensers are not recommended for this task as they will only use durability on a flint and steel if the block in front of them is air or TNT.
• Be Mindful of Fire Resistance: Grains of infinity are slightly fire-resistant but not entirely fireproof. Ensure that the fire has completely burned out before assuming that grains of infinity will spawn.
• Try a Smaller Scale: If you are concerned about grains of infinity falling into the fire and being destroyed, try lighting a smaller area of bedrock. This will reduce the risk of grains being consumed by the fire.
• Consider Alternative Methods: If you are still unable to obtain grains of infinity, consider using alternative methods such as crafting redstone into grains or utilising a vacuum hopper and chest setup with a dispenser and redstone timer.

Remember to exercise patience and persistence, as obtaining grains of infinity may require multiple attempts and adjustments to your approach.

Adjust the config settings

To enable grains of infinity in the Aroma Mining Dimension, you will need to adjust the config settings. Here are the detailed steps to follow:

Locate the Config File

Firstly, you need to locate the config file for the Aroma Mining Dimension mod. This file is typically found in the config folder within the Minecraft installation directory. The file path may vary depending on your system and Minecraft installation, but it is usually located in the .minecraft folder.

Open the Config File

Once you have located the config file, open it with a text editor such as Notepad or Notepad++. This will allow you to view and edit the configuration settings.

Adjust Dimension Settings

Within the config file, locate the section related to the Aroma Mining Dimension. This section may be labelled as "Aroma1997s-Dimensional-World" or "Aroma Mining Dimension Settings". Here are the key settings to adjust:

• Dimension ID (DimID): Ensure that the Dimension ID is set correctly. In some versions, the default value may be listed as "-6", but it should be changed to "6" to match the other mod configurations.
• World Modifiers: Adjust the world modifiers to suit your preferences. Here are some key settings:
• Brightness: Set "B:bright" to "true" to make the mining world completely bright, even in unlit areas.
• Grass Top: Set "B:grassTop" to "true" to have grass at the top of the world instead of stone.
• Daytime: Set "BnlyDay" to "true" to ensure the world time is always daytime in the mining dimension.
• Mob Spawning: Set "B:spawnMobs" to "false" to prevent mobs from spawning in the mining world (except from mob spawners).

Grains of Infinity Settings

To enable and adjust the settings for grains of infinity, locate the "enderio>items>infinity powder" section in the Ender IO config file. Here are the key settings to adjust:

• Grains of Infinity Spawn Chance: Set this value to "1" to increase the spawn chance of grains of infinity.
• Enable in All Dimensions: Set "enableInAllDimensions" to "true" to allow grains of infinity to spawn in all dimensions, including the Aroma Mining Dimension.
• Fire Minimum Age: Adjust the "fireMinAge" value to control how old the fire has to be before grains of infinity can spawn.

Save and Restart

After making the desired adjustments to the config settings, save the file and restart your Minecraft world for the changes to take effect.

By following these steps and adjusting the config settings, you should now have enabled grains of infinity in the Aroma Mining Dimension. Remember to experiment with different settings and values to find the configuration that best suits your gameplay experience.

Use a dispenser

To enable grains of infinity in the Aroma Mining Dimension, one method you can use is a dispenser. This is a simple and effective way to automate the process of obtaining grains of infinity. Here's a step-by-step guide on how to use a dispenser:

Step 1: Gather the Required Materials

To set up the dispenser, you will need a few essential items. These include a dispenser, a redstone timer or clock, a hopper, any type of chest, and a vacuum hopper or vacuum chest. You will also need flint and steel as the primary tool for lighting the bedrock on fire.

Step 2: Find or Create a Flat Bedrock Area

Locate an area in the Aroma Mining Dimension where the bedrock is relatively flat. This flat surface is crucial for the process to work effectively. If you cannot find a naturally flat area, you may need to mine and create a flat chamber in the bedrock layer.

Step 3: Set Up the Dispenser

Place the dispenser in a strategic location near the flat bedrock area. Load the dispenser with flint and steel to ensure it has the necessary materials to light the fires. You can automate this process by connecting the dispenser to a redstone timer or clock, allowing it to dispense flint and steel at regular intervals.

Step 4: Collect the Grains of Infinity

Position a hopper below the bedrock to collect any items that drop. Connect the hopper to a chest, preferably a vacuum hopper or vacuum chest, to ensure that the grains of infinity are safely stored. The vacuum hopper will help prevent the grains from falling into the fire and getting destroyed.

Step 5: Light the Bedrock on Fire

Use the flint and steel to light the bedrock on fire. It is important to let the fire burn out naturally, as this is a key factor in the spawning of grains of infinity. The fire needs to reach a certain age for the grains to spawn, and this process has a 50% chance of success for each attempt.

Step 6: Monitor and Refill the Dispenser

Keep an eye on the dispenser to ensure it remains stocked with flint and steel. The dispenser will only use durability on the flint and steel if the block in front of it is air or TNT. By regularly refilling the dispenser and letting the fires burn out, you can increase your chances of obtaining grains of infinity.

Using a dispenser in this manner allows you to automate the collection of grains of infinity, making the process more efficient and less tedious. You can adjust the setup to suit your specific needs and preferences, such as changing the spawn percentage and the number of grains spawned per attempt.

Frequently asked questions