Purest Naturals Aroma Diffuser: Easy Cleaning Steps

how to clean purest naturals aroma diffuser

Essential oil diffusers are a great way to fill your home with fragrance and create a relaxing atmosphere. However, it's important to keep your diffuser clean to prevent oil build-up and mixing of scents. Here's a step-by-step guide to cleaning your Purest Naturals aroma diffuser:

After Each Use:

1. Unplug the diffuser and empty any remaining water and oil.

2. Clean the reservoir with a soft, damp cloth and a natural dish soap. Rinse and dry with a microfiber cloth.

3. Use a cotton swab dipped in rubbing alcohol or white vinegar to clean the ultrasonic plate or chip, removing any excess oil.

4. Reassemble the diffuser.

Deep Cleaning:

1. Unplug the diffuser and empty the reservoir.

2. Fill the diffuser halfway with water and add approximately 10 drops of distilled white vinegar.

3. Plug the diffuser back in and let it run for 10-15 minutes to allow the vinegar to disinfect and break down oil build-up.

4. Unplug the diffuser, empty the vinegar and water solution, and wipe down the reservoir with a damp microfiber cloth.

5. Clean the ultrasonic plate or chip with a cotton swab dipped in rubbing alcohol.

6. Wipe down the exterior of the diffuser with a damp cloth.

7. Reassemble the diffuser.

Remember to always refer to your diffuser's manual for specific cleaning instructions. By regularly cleaning your Purest Naturals aroma diffuser, you can ensure it functions properly and enjoy your favourite fragrances without any unpleasant mixing of scents.

Characteristics Values
Frequency of cleaning After every use and deep cleaning once a month
Materials required Microfiber cloths, dish soap, cotton swabs, rubbing alcohol, white vinegar
Step 1 Unplug the diffuser and empty the reservoir
Step 2 Clean the reservoir using a microfiber cloth and dish soap
Step 3 Use a cotton swab and rubbing alcohol to clean the ultrasonic plate
Step 4 Reassemble the diffuser
Deep cleaning step 1 Unplug the diffuser and empty the reservoir
Deep cleaning step 2 Add water and distilled white vinegar to the tank
Deep cleaning step 3 Plug the diffuser back in and run it for 15 minutes
Deep cleaning step 4 Empty and wipe down the reservoir
Deep cleaning step 5 Use a cotton swab and rubbing alcohol to clean the ultrasonic plate
Deep cleaning step 6 Use a damp cloth to wipe down the outside of the diffuser

shunscent

Unplug and empty the diffuser

To clean the Purest Naturals aroma diffuser, the first step is to unplug the diffuser and empty the reservoir. Always unplug the diffuser before cleaning as it is a safety hazard to keep it plugged in and running. Pour out any water or oil left in the reservoir from behind, as this will prevent you from spilling on the diffuser's operating buttons, which could cause damage to the diffuser.

After unplugging and emptying the diffuser, the next step is to clean the reservoir. This can be done by wiping it with a soft, damp cloth with a drop of natural dish soap. Rinse the reservoir under water to remove any soapy residue, then dry it using a dry microfiber cloth.

The final step is to clean the ultrasonic plate or chip. This can be done by dipping a cotton swab into rubbing alcohol or white vinegar and gently rubbing it over the plate or chip to remove any excess oil buildup. The ultrasonic plate or chip breaks down the oils so that the water can disperse the molecules into the air, so it is important to keep it clean.

shunscent

Clean the reservoir

To clean the reservoir of your Purest Naturals Aroma Diffuser, follow these steps:

  • Unplug the diffuser and empty the reservoir. Before you start cleaning, make sure your diffuser is unplugged for safety. Then, pour out any water or oil left inside.
  • Clean the reservoir with a microfiber cloth and dish soap. Add a drop of natural dish soap to a soft, damp cloth and wipe down the reservoir. Rinse it with water to remove any soapy residue, then dry it with a dry microfiber cloth.
  • Alternatively, you can use a cotton brush and a small amount of natural dish soap to gently wipe down the inside and outside of the reservoir, removing any grime. Rinse the diffuser with a damp cloth and rub it until any water running off is clean.
  • For a deep clean, fill the reservoir halfway with clean water and add 10 drops of distilled white vinegar. Vinegar is a great disinfectant and will help break down any oils inside the diffuser.
  • Run the diffuser for 10-15 minutes, then unplug it and pour out the water and vinegar solution. Use a damp microfiber cloth to wipe down the reservoir and remove any residues, then dry it with a new microfiber towel.

shunscent

Clean the ultrasonic plate

To clean the ultrasonic plate of your Purest Naturals aroma diffuser, follow these steps:

  • Unplug the diffuser and empty the reservoir.
  • Use a cotton swab and rubbing alcohol to clean the ultrasonic plate. Oils can build up on the ultrasonic plate or chip as they work to break down essential oils. Removing this buildup can ensure that the plate continues to function properly.
  • Gently rub the cotton swab over the plate or chip to clear any buildup.
  • Rinse the ultrasonic plate with clean water to remove any residual alcohol.
  • Dry the ultrasonic plate with a clean cloth or paper towel before reassembling the diffuser.

shunscent

Reassemble the diffuser

Once you have cleaned your Purest Naturals Aroma Diffuser, it's time to reassemble the parts.

First, ensure that all the components are completely dry. You can use a dry paper towel or a microfiber cloth to wipe down the interior of the diffuser. It is important to ensure that there is no standing water left in the reservoir, as this can lead to the growth of mould or mildew.

Next, carefully put back all the parts of the diffuser, including the reservoir and the ultrasonic plate or chip. Make sure that all the components are securely in place.

After reassembling, you can refill the diffuser and use it again. It is recommended to clean your diffuser after each use and perform a deep cleaning at least once a month to keep it functioning optimally.

shunscent

Deep clean once a month

To keep your Purest Naturals Aroma Diffuser in good working order, it is recommended to deep clean the appliance once a month. Here is a detailed guide on how to do this:

Firstly, unplug the diffuser and empty any water or oil remaining in the reservoir. It is important to never submerge any part of the diffuser in water or get excess moisture into the control buttons.

Next, fill the diffuser's reservoir with plain water and add 10 drops of distilled white vinegar. Do not use any other type of vinegar or cleaning agent as these could be toxic and release dangerous gases.

Once the water-vinegar solution has been added, plug the diffuser back in and run it for 10 to 15 minutes. This will allow the solution to cut through any built-up oils and grime inside the diffuser.

After this, unplug the diffuser again and empty the water-vinegar solution. Use a soft cloth to thoroughly wipe down and dry the reservoir.

The next step is to clean the ultrasonic plate or chip. Dip a cotton swab into rubbing alcohol and gently wipe the plate or chip, removing any excess oil build-up.

Finally, wipe down the exterior of the diffuser with a damp cloth. Reassemble the diffuser and it is ready to be used again.

By deep cleaning your Purest Naturals Aroma Diffuser once a month, you can prevent issues such as mould and corrosion, and ensure that it continues to work effectively.

Frequently asked questions

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment