Unlocking Aroma Mining Dimension: Adding Blocks For 1.12.2

Aroma1997's Dimensional World is a mod for Minecraft 1.12.2 that adds a new dimension, the Mining Dimension, as well as blocks and items related to it. The Mining Dimension is a flat world with numerous caves, designed for mining and quarries. To access it, players must craft Portal Blocks, arrange them like a Nether Portal, and ignite the bottom blocks with the Mining Multitool. This guide will explore how to add blocks to this dimension.

Crafting the Portal Blocks

To access the Mining World, players need to craft the Portal Blocks. These blocks are crafted using the Portal Frame from Aroma1997's Dimensional World. Once crafted, arrange the blocks in the same shape as a traditional Nether Portal. To activate the portal, ignite the bottom blocks with the Mining Multitool. To travel through the portal, the player must sneak.

The Mining World is a dimension added by Aroma1997's Dimensional World, designed for mining and quarries. It is similar to the Overworld but completely flat, with lots of openings to caves. Players can also use the DimensionChanger to instantly teleport between the Overworld and the Mining World without needing to use the portal.

Arranging the blocks in the shape of a Nether Portal

To add blocks to the Aroma Mining Dimension in Minecraft 1.12.2, you must first craft the portal blocks. Once you have the required materials, you can start constructing the portal by arranging the blocks in the same shape as a Nether Portal.

The Nether Portal is a manufactured structure that acts as a gateway between the Overworld and the Nether dimensions. To build a Nether Portal, you must arrange blocks in a specific pattern, creating a vertical rectangular frame. The minimum size for a functional Nether Portal is 4 blocks wide by 5 blocks tall, and the maximum size is 23 blocks wide by 23 blocks tall. The corners of the frame are not required, but they can be included for a more complete rectangular style.

When crafting the portal, it is important to use obsidian blocks. You will need a minimum of 10 obsidian blocks for the smallest portal (4x5 without corners) and up to 88 obsidian blocks for the largest portal (23x23 with corners). Place the obsidian blocks to form the rectangular frame, ensuring that the base is 4 blocks wide and the sides are 5 blocks high.

Once the frame is constructed, you can activate the portal by igniting the bottom blocks. This can be done using flint and steel or a fire charge. The fire must be the last placed element in the structure. After igniting the blocks, the portal will activate, creating portal blocks inside the frame that resemble a vortex.

With the portal activated, you can now transport between the Overworld and the Nether dimensions. Simply step into the portal and you will be taken to the other dimension. Remember that you will need to sneak to travel through the portal to the Mining World.

Igniting the bottom blocks with the Mining Multitool

To access the Mining World dimension in Aroma1997's Dimensional World mod, players must ignite the bottom blocks of the portal with the Mining Multitool. This tool is the first craftable item from the mod and is essential for activating the portal and entering the Mining Dimension.

The Mining Multitool is not only used to ignite the portal but also has other crafting purposes. It is used to craft the Portal Frame, which is a crucial component of the portal structure. The portal itself is constructed by arranging the Portal Blocks in the same shape as a Nether Portal.

It's important to note that the Mining Dimension serves as an alternative space for mining activities, designed to prevent players from ruining the Overworld with automated machines or quarries. This dimension features a similar landscape to the Overworld but with flatter terrain and more caves, making it ideal for mining and quarry purposes.

To summarise, igniting the bottom blocks of the portal with the Mining Multitool is the key step in accessing the Mining Dimension in Aroma1997's Dimensional World mod. This tool not only activates the portal but also has additional crafting utilities, making it a vital asset for players looking to explore the Mining World.

Using the DimensionChanger to teleport

The DimensionChanger is an item added by Aroma1997's Dimensional World mod. It allows players to instantly teleport between the Overworld and the Mining World without having to use a portal. This can be a convenient way to travel between the two dimensions, especially if you have not crafted a portal or do not want to go through the process of igniting the portal blocks with the Mining Multitool.

To use the DimensionChanger, simply hold the item in your hand and right-click. This will bring up a menu that allows you to select the dimension you want to teleport to. You can choose between the Overworld and the Mining World. Keep in mind that you must have already visited the Mining World through the portal at least once before you can teleport there with the DimensionChanger.

The DimensionChanger is a useful tool for players who frequently travel between the Overworld and the Mining World. It can save time and effort, especially if your portal is far away from your base or if you are in a hurry. Additionally, the DimensionChanger can be used to quickly escape dangerous situations in the Mining World, such as if you are low on health or being chased by hostile mobs.

It is important to note that the DimensionChanger is not the only way to teleport between the Overworld and the Mining World. As mentioned earlier, you can also construct a portal using Portal Blocks, arranged in the same shape as a Nether Portal. Once the portal is activated by igniting the bottom blocks with the Mining Multitool, you can travel between the dimensions by sneaking through the portal.

Building a wall with a hole in the middle

Planning and Preparing:

Before you begin construction, it's important to assess the suitability of the location for your interior wall. If you're building on a wooden floor, the wall should be placed perpendicular to the floor joists or parallel to and on top of a beam or joist. For concrete floors, any point on the concrete is solid for an interior wall.

Next, you'll need to gather your materials and tools. For an 8-foot-long interior wall, you'll need:

• 9 two-by-fours, each 8 feet long
• Galvanized nails, 2-1/2 inches long
• Drywall screws, 1-1/4 inches long
• Drywall joint compound
• A laser level or plumb bob
• Painting supplies: roller frame, cover, and tray
• A powder-actuated nailer (if you're working on a concrete floor)

Marking Stud Locations:

Mark the intended stud locations on the top and bottom plates of your wall. Put two two-by-fours against each other and place a short scrap piece of two-by-four at each end, marking these spots. Then, mark five positions between the outside marks, spacing them 16 inches apart.

Fastening the Bottom Plate:

If you're working with a wood floor system, attach one of the two-by-fours with a hammer and nails, driving the nails by hand directly through the two-by-four into a joist or beam. For concrete floors, use a powder-actuated nail gun to attach a pressure-treated two-by-four directly to the concrete.

Fastening the Top Plate:

The top plate must be positioned directly above the bottom plate, connected across perpendicular ceiling joists or on a single joist. Use a laser level to ensure the plates are aligned, and nail the top plate into place.

Measuring and Cutting Studs:

Cut your vertical studs using an electric miter saw. Measure the distance between the bottom and top plates, and transfer this measurement to your studs before cutting. Number each stud and corresponding plate position for easy reference. It's better to cut studs slightly longer than needed, as you can always shave off extra length.

Securing the Studs:

Tap the first stud into position, using a vertical laser line to ensure it's plumb. If adjustments are needed, gently tap the top or bottom of the stud with a hammer. Toenail each stud into place by driving the nail straight in, then angling it up to about 60 degrees and driving it the rest of the way. Ensure the nail sinks into the plate.

Hanging Drywall:

Hang the drywall sheets horizontally on the studs, fastening them with a cordless drill and coarse-thread 1-1/4-inch drywall screws. For walls longer than 8 feet, stagger the drywall ends to avoid four corners meeting.

Finishing the Drywall:

Use a drywall knife to fill the screw holes with joint compound. Then, embed paper joint tape in the compound along the drywall seams, covering it with another layer of compound. Let it dry, and sand any uneven areas.

Painting:

Roll drywall primer onto the drywall and let it dry. Then, apply two coats of paint in the colour of your choice. For an 8-foot wall, estimate one gallon of primer and two to three gallons of paint.

Now, for the part you've been waiting for—adding a hole to your newly built wall!

Drilling a Hole:

Choose a drill bit appropriate for the material of your wall. For drywall, use a drywall bit; for brick, stone, or concrete, use a masonry bit; for wood, use a spur point bit; and for tile, ceramic, or glass, use a tile bit. Mark the spot you want to drill with a pencil, and put on safety goggles and a dust mask. Position the drill bit at a 90-degree angle to the wall and squeeze the trigger gently, increasing the pressure as the drill penetrates the wall. Withdraw the bit while the drill is still running when you reach the desired depth.

And there you have it—a wall with a hole in the middle! You can now use this hole for any intended purpose, such as running cables or pipes, creating a passthrough for light or ventilation, or simply as a unique design element.

Frequently asked questions