Wax Melt Fragrance Oil Ratios: A Uk Guide

The amount of fragrance oil to add to wax melts is a big question in the wax melt and candle community. The general rule of thumb is to use 5-10% fragrance oil to wax, with some sources recommending a maximum fragrance load of 10%. This can be adjusted depending on the type of wax and personal preference.

The ratio of oil to wax

However, the amount of fragrance oil you use can vary depending on personal preference and the type of wax you are using. For example, Golden Brands 464 Soy Wax has a maximum fragrance load of 10% or 1.6 ounces per pound of wax. It is important to refer to the fragrance information located on the wax information pages or check a wax guide to ensure you are using the correct ratio.

To calculate the ratio, you can use the following formula: fragrance oil (in grams) / total mass (in grams) x 100 = percentage of fragrance oil. For example, if you have 100g of wax, you would use 90g of wax and 10g of fragrance oil, resulting in a 10% fragrance load.

It is also important to consider the flash point of the fragrance oil to avoid crafting issues. Additionally, allowing your wax melts to "cure" for a few weeks will result in a more powerful aroma, although this is not essential.

The difference between fragrance load and fragrance content

When making wax melts, it's important to understand the difference between fragrance load and fragrance content. Fragrance load refers to the maximum amount of fragrance oil that can be added to the wax. This can vary depending on the type of wax being used; for example, Golden Brands 464 Soy Wax has a maximum fragrance load of 10% or 1.6 ounces per pound of wax. Fragrance content, on the other hand, refers to the actual amount of fragrance oil that is added to the wax. This can be adjusted up or down depending on personal preference, but it's important to keep the ratios on or below 10% to avoid crafting issues. As a rule of thumb, 5-10% of fragrance oil to wax is recommended to create a beautiful and balanced aroma. For example, using 5g of fragrance oil in 50g of wax will give you a pleasant scent.

The maximum amount of fragrance oil recommended

It's important to note that each type of wax has a different maximum fragrance load percentage, so be sure to refer to the fragrance information located on the wax information pages or check out a wax guide. To be safe, always keep your ratios on or below 10% and use fragrance oils with a low enough flash point to avoid crafting issues.

The right scent strength and technique

A good rule of thumb is to use 5-10% fragrance oil to wax. So, for every 50g of wax, you would use up to 5g of fragrance oil. This will give you a balanced aroma.

However, the amount of fragrance oil you use can be adjusted depending on the type of wax you're using and your personal preference. For example, Golden Brands 464 Soy Wax has a maximum fragrance load of 10% or 1.6 ounces per pound of wax. So, if you're using 100g of wax, you would use 90g of wax and 10g of fragrance oil.

It's important to understand the difference between fragrance load and fragrance content and make an active decision about which way you want to work. These are not interchangeable, and you should choose the method that works best for you.

Experimenting with fragrance oil percentages is a great way to find the right scent strength and technique for you. However, it's important to always keep your ratios on or below 10% and use fragrance oils with a low enough flashpoint to avoid crafting issues.

The flash point of fragrance oils

The amount of fragrance oil added to wax melts can range from 5% to 10% of the total mass. This means that for every 100g of wax, 5-10g would be fragrance oil. For example, using 5g of fragrance oil in 50g of wax should give a beautiful and balanced aroma.

The exact amount of fragrance oil used can be adjusted to personal preference and the type of wax being used. For instance, Golden Brands 464 Soy Wax has a maximum fragrance load of 10% or 1.6 ounces per pound of wax. It is important to refer to the fragrance information located on the wax information pages or check a wax guide to ensure the correct amount of fragrance oil is used.

Frequently asked questions