Mastering Vape Aroma: The Perfect Blend For 75Ml Base

how much aroma to add to 75ml base vape

Mixing your own vape juice is a fun and cost-effective way to create blends of flavours that you enjoy. The process is simple: choose your base, add nic salts or nicotine shots, and then add your desired aromas or flavour concentrates. The recommended dilution for E-Flavours is approximately 10%, but this can vary depending on the LV level of your base and your personal preference. For example, Flavour Art recommends a concentration of 3-5% for their range, while Capella flavours are typically mixed at around 15%. It's important to note that flavour concentrates are complicated artificial flavours, so there will be a lot of trial and error when mixing your own vape juice.

Characteristics Values
Base 100% propylene glycol, 100% vegetable glycerine, or a mix of the two
Ratio of PG and VG Depends on the characteristics you want from your e-liquid
PG More flavour and throat hit
VG More vapour
Additive Malic Acid, Koolada, Sweetener, Vanilline, Acetyl Pyrazine
Aroma or Concentrate 12%
Additive 3%
Flavour 5 to 20% of the total product

shunscent

The ideal mixture for a 70/30 PG/VG base is 13% concentrate

The first step in creating your own e-liquid is to decide on the PG/VG ratio. This will depend on the type of vaping experience you are looking for. A 70/30 PG/VG ratio is a good option for those who want a strong throat hit, similar to the sensation of smoking tobacco, as well as a more pronounced flavour. PG is also a thinner liquid, making it suitable for stealth vaping.

The next step is to choose the right flavour concentrate. This is a matter of personal preference, but it's important to note that you will need a higher percentage of concentrate if you want a stronger flavour. Some people may find that a certain flavour is too weak at 10%, while others may find the same flavour overpowering at the same concentration. It's also worth considering that some flavours are better suited to different types of liquids, so be sure to do your research before mixing.

Once you have your PG/VG base and your chosen flavour concentrate, it's time to start mixing. This can be done by adding the desired amount of concentrate to your base and shaking well. It is recommended to let the mixture steep for a few days to allow the flavours to develop fully.

Finally, it's important to note that creating your own e-liquid comes with certain risks. Nicotine is a dangerous substance and should be handled with extreme care. Always wear protective gear and store nicotine in a safe, secure location.

shunscent

Flavour Art recommends 3-5% for their concentrate range

Flavour Art recommends a concentration of 3-5% for their concentrate range. This strength is only suitable for vapers who enjoy subtle mixes. For those who prefer stronger flavours, a concentration of up to 15% is advised.

Flavour Art's range of concentrates includes Custard Premium, Forest Fruit, Fuji Apple, and Fresh Cream. Their products are crafted using premium ingredients and adhere to rigorous safety and quality standards.

When mixing your own e-liquid, it is important to remember that everyone has different tastes when it comes to flavour intensity. As such, there will be a lot of trial and error involved in the process. It is generally recommended to start with a test batch at a lower concentration and adjust according to your preference.

Additionally, the type of flavour can impact the ideal concentration. For example, standalone fruit flavours typically start at a lower concentration of 2-5%, while dessert and bakery flavours like custards, creams, and cookies may require a higher starting concentration of 1-2%.

It is also worth noting that the base composition of your vape liquid will affect the flavour. A higher VG liquid may require more flavour concentrate as VG doesn't carry flavour as well as PG.

Use Warming Oil in an Aroma Diffuser?

You may want to see also

shunscent

This dilution rate is just a general guideline, and the amount of flavouring you use will depend on your personal preference. Some people may find a certain flavour too weak at 10%, while others may find it too strong. It is recommended to start with a lower concentration and adjust according to your taste.

The maturation phase is also important, as it allows the flavours to develop fully. After mixing your e-liquid, it is best to let it rest for at least 48 hours to a few weeks, depending on the complexity of the recipe.

Additionally, the type of base you use can also affect the flavour. A higher VG base may require more flavouring, as VG is not as good at carrying flavour as PG.

It is important to note that DIY flavours are designed for electronic cigarettes and should not be vaped on their own. They must be diluted with a base before use.

shunscent

Aromas are added in the form of flavour concentrates

The amount of flavour will vary depending on the LV level of your base. For a 70/30 PG/VG base, the ideal mixture is 13% concentrate. Flavour Art recommends 3-5% for their concentrate range, but this may only be suitable for those who like very subtle mixes.

It is recommended to start with around 12% aroma or concentrate and 3% additive, if required, and adjust to your preference. The flavour part of your e-liquid will usually account for around 5 to 20% of the total product.

Flavours react very differently as they steep. Generally, fruit flavours can be more prone to fading, whereas rich, creamy flavours often get stronger. For this reason, it is recommended to get somewhere close to your flavour preference with a test mix and then leave it to steep for a while before fine-tuning.

It is also important to note that VG isn't as good at carrying flavour as PG, so you may need more flavour in a high VG mix.

shunscent

Your new brew should not be used straight away

Steeping is not always necessary, and you can use your e-liquid straight away, especially if you are using fruit flavours. However, if you want to get the best flavour out of the liquid, it is recommended to shake the bottle, crack open the seal, squeeze in some fresh air to oxidise the juice, replace the cap, and give it a good shake. Alternatively, you can leave it in a safe place (e.g., a dark cool cupboard) with the lid off for a few days.

It is also important to note that e-liquid does expire. The degradation process is slow, and some e-liquid flavours could last even longer than their expiration date, depending on how they are stored. Ideally, you want to keep e-liquid away from light, air, heat, and movement. With proper storage, your juice will probably be fine even beyond its expiration date.

The expiration date of e-liquid is typically two years from the manufacturing date. However, there are no set regulations for this, and it is up to the manufacturer to decide. The expiration date is meant to be used as a general guide, and vaping past this date is not dangerous. Over time, the e-liquid will begin to degrade, and the flavour and vapour production may be reduced.

Frequently asked questions

The ideal aroma mixture depends on the LV level of your base. For a 70/30 PG/VG base, the ideal mixture is 13% concentrate.

Flavour Art recommends 3-5% for their concentrate range, but this may be too subtle for some vapers. A strength of around 15% is preferred by many.

This varies according to individual taste. One person may find a flavour overpowering at 10% while another may think it is too weak at 15%. There will be some trial and error when mixing your own e-liquid.

Put 1 drop of e-liquid onto each cotton hole in the coil. The number of holes will vary, but there are usually about 6.

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment