The Body Source aroma diffuser is an ultrasonic oil diffuser and humidifier with 7-colour LED lights. It has a capacity of 100ml and can be used for aromatherapy. The diffuser vaporises water and essential oils to produce a fragrant mist. It has two lids: a slim vase-like lid with a tall chimney and a shorter, misted plastic attachment. The diffuser can be set to constant, 1 hour, 2 hours, or intermittent modes. It also has two lighting modes: constant colour or automatic changing. The product is well-reviewed, with customers praising its value for money, appearance, and ease of use.
Characteristics | Values |
---|---|
Capacity | 100ml |
Water tank run time | 3.5 hours (constant mist), 6.5 hours (sporadic mist) |
LED lights | 7 colours with 2 brightness settings |
Timers | Constant, 1 hour, 2 hours, 3 hours, intermittent |
Size | 8 x 8 x 14 cm |
Weight | 220g |
What You'll Learn
How to fill the Body Source aroma diffuser with water and essential oil
Filling the Body Source aroma diffuser with water and essential oil is a simple process. First, you will need to remove the top of the diffuser to reveal the reservoir. Then, fill the reservoir with room-temperature water up to the fill line marked inside. If your diffuser does not have a fill line, refer to the manufacturer's instructions for the recommended water amount.
Once the reservoir is filled with water, you can add your essential oil. Add 3-10 drops of your chosen oil(s) directly into the water. You can use a single oil, such as lavender, or create your own blend by combining different oils. If you are using multiple oils, use 2-3 drops of each to create a nice blend.
After adding the essential oil, simply replace the top of the diffuser and turn it on. Place the diffuser in a central location in the room and enjoy the aromatic benefits!
It is important to note that you should always refer to the manufacturer's instructions when using an essential oil diffuser. Additionally, be sure to clean your diffuser regularly to prevent residue buildup and maintain optimal performance.
Aroma Bead Ornament Durability in Cars: Melting Point Insights
You may want to see also
How to turn the Body Source aroma diffuser on
To turn on the Body Source aroma diffuser, follow these steps:
Place the diffuser in the desired location:
Before using the diffuser, decide where you want it to be placed. It is recommended to place it near the centre of the room to allow for even distribution of the aroma. Ensure that the surface is flat and stable to prevent any accidents.
Prepare the diffuser:
Remove the top of the diffuser by lifting, rotating, or popping it open. This will give you access to the internal water tank. Fill the diffuser with room-temperature water up to the fill line indicated inside the tank. Avoid using hot water as this can affect the diffusion process and potentially damage the diffuser.
Add essential oils:
Add 3 to 10 drops of your chosen essential oil(s) to the water. You can combine different oils, but do not exceed 10 drops in total. The number of drops may vary depending on the size of the room and your desired aroma intensity, so feel free to adjust as needed.
Replace the top and turn on:
Once you have added the essential oils, securely replace the top of the diffuser. Ensure that it is properly aligned and sitting correctly. Finally, turn on the diffuser by pressing the power button or switch. Enjoy the aromatic benefits and adjust the settings as needed!
Heating Aroma Home Soothing Body Wrap: Step-by-Step Guide
You may want to see also
How to set the Body Source aroma diffuser's lighting
The Body Source aroma diffuser comes with 7 colour-changing LEDs with two brightness settings. To set the lighting, follow these steps:
- Place the diffuser near the centre of the room.
- Remove the top of the diffuser by lifting, rotating, or popping it off.
- Fill the diffuser with water up to the fill line.
- Add 3 to 10 drops of your chosen essential oil.
- Put the top back on the diffuser.
- Plug the diffuser into a power outlet.
- Press the power button to turn on the diffuser.
- Press the light button to cycle through the lighting options.
The lighting button allows you to choose between a constant colour mode and an automatic colour-changing mode. You can also adjust the brightness of the LEDs to suit your preference.
Wine Aroma: Foods to Avoid for the Perfect Scent
You may want to see also
How to set the Body Source aroma diffuser's timer
The Body Source aroma diffuser has four timer settings: constant operation, or automatic shut-off after one, three, or six hours.
To set the timer, simply press the button on the diffuser once, twice, three times, or four times, depending on your desired duration. The diffuser will automatically shut off when the water has been consumed to save energy.
Aroma Diffuser vs. Humidifier: What's the Difference?
You may want to see also
How to clean the Body Source aroma diffuser
To clean the Body Source aroma diffuser, follow these steps:
Daily Cleaning
- Unplug the diffuser. It is unsafe to keep it plugged in while cleaning.
- Empty the diffuser after each use. Standing water can lead to the development of mould and mildew spores.
- Clean the interior of the diffuser with a paper towel dampened with white vinegar. This prevents leftover oil from mixing with the next oil you use and stops corrosion. Alternatively, you can use water with a small amount of natural dish soap.
- Clean the ultrasonic plate or chip with a cotton swab dipped in rubbing alcohol to remove excess oil build-up.
- Dry and reassemble the diffuser before refilling and reusing.
Deep Cleaning
- Unplug the diffuser and empty any standing water and essential oils. Do not submerge any part of the diffuser in water or get moisture into the control buttons.
- Fill the diffuser halfway with plain water and add 10 drops of distilled white vinegar. Do not use any other type of vinegar or cleaner.
- Plug the diffuser back in and run it for 10-15 minutes to allow the vinegar and water to cut through built-up oils.
- Unplug the diffuser and empty the vinegar and water solution. Wipe down and dry the reservoir with a soft cloth.
- Wipe down the ultrasonic chip or plate with a cotton swab dipped in rubbing alcohol.
- Wipe down the exterior of the diffuser with a cloth dampened with plain water. Reassemble the diffuser and plug it in before refilling and reusing.
Tips
- Always refer to the manufacturer's instructions for specific cleaning directions.
- Cleaners such as distilled white vinegar and rubbing alcohol are most suitable for cleaning a diffuser.
- Tap water can be used but may cause mineral deposits to build up inside the diffuser, so distilled or bottled water is preferable.
The Most Popular Aroma Scents and Why They're Loved
You may want to see also