Serene House Diffuser: A Guide To Ultrasonic Aroma Diffusion

Serene House is a brand of air care products that specializes in the development of functional and aesthetically pleasing scent devices. Their ultrasonic aroma diffusers use ultrasonic vibrations to transform water and essential oils into a fine mist that is dispersed into the air. The diffusers feature different run time settings, timer controls, and calming light displays. To use a Serene House ultrasonic aroma diffuser, simply add water and essential oil to the water tank, close the covers, and plug the device into a power source.

How to set up the diffuser

Setting up the Serene House Ultrasonic Diffuser is a simple process. Here is a step-by-step guide on how to do it:

Firstly, place the diffuser on a stable surface. This could be a table, desk, or any other flat surface in your desired location. Ensure that the surface is clean and free of any clutter or obstacles.

Next, remove the cover of the diffuser. This will give you access to the water tank. Fill the water tank with water. It is important not to overfill it. Fill it up to or below the maximum water mark level indicated inside the tank.

Once the tank is filled, you can add your essential oil of choice. Add 3-10 drops of 100% pure essential oil. The amount of oil can vary depending on the size of your diffuser and the space you want to scent. Place the drops directly on top of the water surface.

After adding the oil, replace the outer cover of the diffuser securely to prevent any spillage. Now, you can plug in the power. Plug the head of the AC adapter into the power jack on the main unit, and then connect it to a power source.

Finally, turn on the diffuser by pushing the on/off button. You can now enjoy your aromatherapy session! You can choose to run the diffuser continuously or intermittently, depending on your preference. The device will automatically shut off when the water tank is empty, so you don't have to worry about that.

With these steps, you can easily set up your Serene House Ultrasonic Diffuser and create a relaxing and fragrant atmosphere in your space.

How to add water and essential oil

To add water and essential oil to your Serene House Ultrasonic Diffuser, follow these steps:

• Place your diffuser on a stable surface.
• Remove the cover of the diffuser.
• Fill the water tank with water. Be sure to fill it up to or below the maximum (MAX) water mark level. Do not overfill the water tank to avoid damaging the device.
• Add your essential oil. Depending on the size of your diffuser and space, add 3-10 drops of 100% pure essential oil. The oil should be dropped on top of the water surface.
• Once you've added the water and oil, replace the cover. This will prevent any spillage.

Now that you've added the water and essential oil, you can continue with the remaining steps to operate your Serene House Ultrasonic Diffuser.

How to control the light settings

To control the light settings of your Serene House Ultrasonic Aroma Diffuser, you can follow these steps:

Firstly, it is important to note that the light settings may vary depending on the model of your diffuser. Some models offer optional ambient light settings, while others feature rotating or customisable LED lights with various colour options.

For models with optional ambient light, such as the Serene House Ultrasonic Light House Aromatherapy Diffuser, you can choose to turn the warm white light on or off during runtime. This can be done by locating the control button on your diffuser and pressing it until the light setting turns on or off.

If your model features rotating LED lights, such as the Serene House Cosmos Diffuser, the lights will automatically rotate through the different colours. In this case, you can control the light setting by turning the diffuser on or off. To do so, simply press the power button once to activate the diffuser and the rotating lights.

For diffusers with customisable LED lights, like the Serene House Starlight Diffuser, you can usually adjust the light settings by pressing the power button multiple times to cycle through the different colour options. Each press of the button may change the colour, allowing you to select your preferred option.

Additionally, some models may offer a "light-off" mode, which allows you to turn off the lights while still diffusing the essential oils. This can be achieved by pressing and holding the power button for a few seconds until the lights turn off.

Remember to refer to the specific instructions provided with your Serene House Ultrasonic Aroma Diffuser model for detailed guidance on controlling the light settings.

How to activate the ultrasonic mist

To activate the ultrasonic mist on your Serene House Ultrasonic Aroma Diffuser, follow these steps:

• Place your diffuser on a stable surface.
• Remove the cover of the diffuser.
• Fill the water tank with water up to or below the maximum (MAX) water mark level. The amount of water you add will depend on the desired run time and the size of your diffuser. For example, the Serene House Mist Light Wood Ultrasonic Aroma Diffuser has a water capacity of 250 ml and can run continuously for 13 hours or intermittently for up to 26 hours. On the other hand, the Ranger travel diffuser has a smaller water capacity of 60 ml and can run continuously for up to 3 hours or intermittently for up to 6 hours.
• Add 3-10 drops of 100% essential oil into the water tank. The number of drops can vary depending on the size of your diffuser and the space you want to scent. For instance, the Serene House Scentilizer Blob Ultrasonic Diffuser recommends 5-10 drops of essential oil for smaller spaces like bathrooms, bedrooms, and small offices.
• Place the cover back on the diffuser to prevent spillage.
• Plug the head of the AC adapter into the power jack on the main unit, and plug the power cord into an outlet.
• Turn on the diffuser by pushing the on/off button.
• Depending on your device, select the continuous or intermittent option for mist diffusion. You can also choose to have rotating colors or select a fixed color if your device offers light customization.
• If your device has a time option, select your desired duration, or let the device run continuously until the water is consumed. All Serene House devices have an Auto-Shut-off feature when the water tank is empty.

Now you can enjoy the benefits of aromatherapy as the ultrasonic vibrations create a cool mist of essential oils, filling your space with your favorite scents.

How to use the diffuser safely

To use the Serene House Ultrasonic Diffuser safely, follow these steps:

Firstly, ensure that you have placed the diffuser on a stable surface before you begin. Once you have found a suitable spot, you can start to set up the diffuser. Remove the cover and fill the water tank with cool water. Do not overfill the tank—only fill it up to or below the maximum water mark to avoid damaging the device.

Next, add your essential oil. For the best results, use 3-10 drops of 100% pure essential oil. The amount of oil you use will depend on the size of your diffuser and the space you intend to use it in. Place the oil directly onto the water's surface, then replace the cover to prevent any spillages.

Now your diffuser is set up, you can turn it on by plugging the AC adapter into the power jack and switching it on at the mains. You can then adjust the settings according to your preferences. You can choose to run the diffuser continuously or intermittently, and you can select a fixed light colour or opt for rotating colours. If your device has a timer, select your desired duration, or simply let the diffuser run until the water is consumed—all devices will automatically shut off when the water tank is empty.

Frequently asked questions