Mastering The Aroma 360 Remote: A Step-By-Step Guide

The Aroma 360 is a waterless and heatless scent diffuser that uses cold air diffusion to disperse fragrance into the air. It comes with a remote control that allows users to adjust the scent intensity, timer settings, and mist levels. The remote also controls the power and density settings of the diffuser, with options to increase or decrease the aroma density by 10%. To reset the remote, unplug the diffuser and hold down the 35% button for 5 seconds while plugging it back in. The Aroma 360 is designed for indoor use and can run for up to 12 hours without charge.

Resetting the remote control

To reset your Aroma360 remote control, follow these steps:

• Unplug the diffuser from the power outlet.
• Hold down the blue button on the remote labelled "35%" for 5 seconds.
• While continuing to hold the "35%" button, plug the diffuser back into the wall outlet. A red light will flash on the diffuser.
• Release the "35%" button and avoid pressing any other buttons on the remote for about 10 seconds. It takes time for the receiver within the device to reset itself.

Your Aroma360 remote control should now be reset to its factory settings.

Adjusting scent density

Adjusting the scent density of your Aroma360 diffuser is simple and allows you to customise your scenting experience. The remote control gives you the option to increase or decrease the density of your chosen aroma.

To increase the density, press the 'Density +' button on your remote. Each press of this button will increase the density by 10%. You can press this button up to 10 times for maximum density.

Similarly, to decrease the density, press the 'Density -' button. Again, each press will reduce the density by 10%, and you can press this button up to 10 times for the minimum density setting.

The blue buttons on your remote also allow you to control the scent concentration by adjusting the scenting interval. You can choose from 20%, 35%, 50%, 65%, 80%, or 95%. These settings determine how long the diffuser will diffuse the scent and for how long it will pause before diffusing again. For example, at the 20% setting, the diffuser will disperse scent for 40 seconds and then pause for 160 seconds.

You can also press the 'Aroma' button to make the unit work continuously.

With these easy-to-use remote control functions, you can adjust your Aroma360 diffuser to achieve the perfect scent density for your space.

Replacing the nozzle

To replace the nozzle of your Aroma360 diffuser, start by unplugging the diffuser from the power outlet and removing the oil bottle. Carefully pull out the clear tube and then gently pull out the black nozzle using tweezers. It may require some gentle wiggling to remove it.

Next, take your new nozzle and push it firmly into the top of the diffuser. Ensure it is securely in place. Now, reinsert the clear tube into the nozzle, making sure to insert it into the correct opening. Inside the nozzle, there is a small, round tube holder that the tube needs to be firmly secured into. If you are having trouble seeing the tube holder, shine a flashlight into the nozzle to increase visibility.

Once the new nozzle and tube are in place, you can insert your chosen Aroma360 oil, reconnect the two halves of the diffuser, and plug it back into the power outlet. Your Aroma360 diffuser is now ready to use again.

Remember to only use Aroma360 oils with your diffuser, as using other oils will void the warranty.

Cleaning the diffuser

To clean the Aroma360 diffuser, follow these steps:

Firstly, make sure your unit is unplugged and always clean your diffuser when it is not in use. This is important for safety reasons and to avoid any accidents. The Aroma360 diffuser should be cleaned every 1-2 months to ensure optimal performance.

Next, fill the empty Aroma360 bottle that came with your diffuser with rubbing alcohol to the second line from the bottom, or around a quarter of an inch. Screw the alcohol-filled bottle into the diffuser. It is important not to over-tighten the bottle and to ensure it is screwed in straight.

Then, run the diffuser for 15 minutes to allow the alcohol to filter through the whole device. After this, unplug the device from the wall outlet and keep the diffuser in an upright position. It is important to always keep the diffuser upright to prevent oil from spilling inside and damaging the mechanics.

Finally, wipe the device with a damp cloth to remove oil stains and fingerprints. Avoid using any harsh or abrasive cleaning products as these may damage the surface of the diffuser.

In addition to this regular cleaning routine, it is also recommended to clean your diffuser in between using different fragrance oils. This will prevent two fragrance oils from blending and creating unexpected combinations.

Troubleshooting common issues

• If your remote is not working, first check that it has been programmed correctly. To do this, simply press the "35%" button and look for the flashing red light on the diffuser. If the red light is not flashing, unplug the diffuser and hold down the "35%" button for 5 seconds while plugging it back in. Avoid pressing any buttons on the remote for 10 seconds to allow the receiver to reset.
• If you have lost your remote, you can easily purchase a replacement remote control for the Mini360 Diffuser on the Aroma360 website. The replacement comes with a battery for immediate use.
• If your diffuser is not working, ensure that it is set up correctly. The Aroma360 diffuser should always be used in an upright position and must be cleaned every 1-2 months to ensure optimal performance. Only use Aroma360 oils, as the use of any other oil is not recommended and will void the warranty.
• If you are experiencing issues with the scent, make sure that the diffuser is placed in an area on its own, away from windows or air vents, so that the scent can circulate and flow freely.
• If your diffuser is leaking, contact Aroma360 Tech Support for assistance.

Frequently asked questions