A Guide To Using An Ultrasonic Aroma Diffuser

An ultrasonic aroma diffuser, also known as an aroma lamp or aromatherapy lamp, is a device that combines the functions of an air humidifier, ionizer, and aroma diffuser. It is used to aromatize your home with essential oils, which can be used to help with various health conditions or simply because you enjoy the scent. To use an ultrasonic aroma diffuser, first, ensure that the device is disconnected from the power source. Then, remove the decorative lid and inner lid of the water tank. Add cool water to the tank, being careful not to exceed the maximum level indicated, and add a few drops of your chosen essential oil. Finally, reassemble the device and connect it to a power source. It is important to regularly clean your ultrasonic aroma diffuser and to use high-quality filtered or distilled water and essential oils.

Filling the water tank

Firstly, ensure that the device is disconnected from the power source for safety. Then, remove the decorative outer lid and the inner lid of the water tank. The inner lid is designed to focus the direction of the mist, while the outer lid serves as a decorative piece. With these lids removed, you will have access to the water reservoir or tank.

Now, it's time to add water. Pour cool water into the tank, being careful not to exceed the maximum level indicated by the line inside the tank. This maximum fill line is crucial, as overfilling can cause issues with your diffuser. The tank capacity can range from 100ml to 500ml, or even up to 1000ml in larger diffusers.

Once you have filled the tank to the appropriate level, it's time to reassemble the diffuser. Place the inner tank lid back on securely, followed by the decorative outer lid. Now, your diffuser is almost ready for use!

Remember to use only the highest quality filtered or distilled water in your ultrasonic aroma diffuser. Regular tap water can be used, but it may result in white dust, which is a residue from minerals in the water becoming airborne. Additionally, always make sure to clean the water tank regularly with a soft, damp cloth to maintain optimal performance and hygiene.

Adding essential oils

Once you've added your oil, reassemble the device by putting on the inner tank lid and then the decorative lid. Finally, connect the diffuser to a power source, and it should be ready to use!

It's important to note that ultrasonic diffusers should not be used with citrus oils as they can cause erosion and release microplastics into the air. It's also recommended to use high-quality filtered or distilled water in your diffuser to avoid issues with mineral buildup and to regularly clean the tank to prevent mould and ensure optimal function.

Powering on

To power on your ultrasonic aroma diffuser, follow these steps:

Firstly, ensure your device is disconnected from the power source before you begin. This is an important safety measure.

Remove the decorative lid and inner lid of the water tank. The decorative lid is the outer covering of the diffuser, and the inner lid sits on top of the water tank. By removing these, you gain access to the tank where you will add your water and essential oils.

Now, pour cool water into the tank. Be careful not to overfill it. Always stay below the "MAX" level indicated by the line inside the tank. Overfilling can cause water to leak out of the tank and damage the device.

Add a few drops of your chosen essential oil to the water. The number of drops will depend on the size of the room and your desired fragrance strength. As a rule of thumb, use fewer drops for smaller rooms and when using the diffuser for the first time. You can always increase the number of drops gradually until you achieve your desired fragrance strength.

Once you have added water and essential oils, it's time to reassemble the device. Put the inner tank lid back on, followed by the decorative lid. Ensure all components are properly aligned and secured before proceeding to the next step.

Now, you can connect your ultrasonic aroma diffuser to a power source. Plug it into an electrical outlet or, if it's a USB-powered model, connect it to a USB port.

Your ultrasonic aroma diffuser is now powered on and ready to use! If you have additional settings like lighting or mist intensity, you can adjust them according to your preferences. Enjoy your aromatherapy session!

Regular cleaning

To keep your ultrasonic aroma diffuser in good condition, it's important to clean it regularly. Here's a step-by-step guide to help you with the process:

Emptying and Routine Cleaning:

• Always unplug the diffuser and remove any decorative or inner lids before cleaning.
• After each use, empty any remaining water from the reservoir to prevent mould and mildew spores from developing.
• Use a paper towel or cloth dampened with distilled white vinegar to wipe out the diffuser's interior. This will prevent oil buildup and keep the scents pure.
• Alternatively, you can use water with a drop of natural dish soap for cleaning.
• Clean the ultrasonic plate or chip with a cotton swab dipped in rubbing alcohol to remove excess oil.
• Dry the diffuser with a paper towel or soft cloth and reassemble it before the next use.

Deep Cleaning:

• Deep clean your diffuser at least once every two to four weeks, or once a month, depending on usage.
• Unplug the diffuser and empty any water and oils.
• Fill the diffuser halfway with plain water and add a teaspoon or 10 drops of distilled white vinegar.
• Run the diffuser for 5-10 minutes to allow the vinegar to disperse.
• Pour out the vinegar and water solution, then dry the reservoir with a soft cloth.
• Clean the ultrasonic chip or plate with a cotton swab dipped in rubbing alcohol.
• Wipe down the exterior of the diffuser with a damp cloth.
• Allow all components to air-dry completely before reassembling and refilling.

Remember to always refer to the manufacturer's instructions for your specific model, as some diffusers may have unique requirements.

Using low mineral water

To use an ultrasonic aroma diffuser, you must first disconnect it from its power source and remove the inner and decorative lids of the water tank. Next, pour cool water into the tank, ensuring you do not exceed the maximum level indicated. Add a few drops of your chosen essential oil, then replace the lids and connect the diffuser to a power source.

When it comes to the type of water used, some sources recommend using tap water, as the natural minerals it contains can help the water diffuse into vapour better than distilled water. However, tap water can also lead to more frequent and thorough cleaning due to mineral build-up. Using distilled water, on the other hand, prolongs the life of the diffuser and minimises cleaning time, but it is more expensive and does not vaporise as well.

Filtered water is a good middle ground, as it is relatively inexpensive and has very few impurities, while still containing some minerals to aid in vapourisation. It also requires less cleaning than tap water.

To ensure optimal performance and longevity of your ultrasonic aroma diffuser, it is recommended to use the purest water possible that fits your budget.

Frequently asked questions