Seamus Hammond
The Rimports Aroma Diffuser is a device that requires careful handling. To remove the top cover, ensure the diffuser is unplugged from the wall. This is the first step in the installation instructions provided by the manufacturer. It is important to follow the manufacturer's guidelines for the safe operation and maintenance of the device.
| Characteristics | Values |
|---|---|
| Placement | On a solid, level, flat water-resistant surface |
| Distance from wall/object | At least 6 inches (15 cm) |
| Bottom of the unit | Should not be blocked |
| Surfaces to avoid | Flammable, non heat-resistant, conductive, easily damaged, wood, humidity/moisture-prone |
| Power | Plug into 120 VAC electrical outlet |
| Water capacity | 200mL |
| Essential oil capacity | 8 drops |
| Operating instructions | Use "MIST" Button to turn on/off and set mist timer; use "LIGHT" Button to turn on LEDs |
| Wireless speaker connection | Find "AromaSpeaker Diffuser" on smart device and select |
| Precautions | Do not move while in use; do not carry by top cover; do not use if cord/plug is damaged; for indoor use only; use supplied power cord only; keep cord off hot surfaces and away from table/counter edges; do not use without nozzle/decorative canopy in place; do not touch sonic piece with bare fingers/metal tools; do not put fingers/hands/objects into diffuser enclosure; always supervise use around children/disabled persons/pets; keep out of reach of children |
| Care and maintenance | Turn off and unplug for maintenance; empty water tank between uses; clean round component after use; check vent/top cover for obstruction |
What You'll Learn
Remove the top cover
To remove the top cover of your Rimports aroma speaker diffuser, first ensure that the diffuser is unplugged from the wall. This is important for safety reasons.
Now that your diffuser is unplugged, you can proceed to remove the top cover. Grasp the top cover firmly and gently lift it straight up and away from the base of the diffuser. Be careful not to tilt or twist the cover as you lift, as this could damage the mechanism.
Once the top cover is removed, you will have access to the water tank and other internal components. If you need to fill the water tank, use a measuring cup to fill it with 200ml of water. Do not overfill the tank beyond the 'Max' line, as this could cause leakage or damage to the diffuser.
If you wish to add fragrance to your diffuser, now is the time to do so. Add up to 8 drops of your chosen essential oil to the water in the tank. Be careful not to add too much oil, as this can affect the performance of your diffuser.
After you have filled the water tank and added your desired amount of fragrance, you can replace the top cover. Gently lower the cover back into place, ensuring that it is properly seated and aligned with the base.
Once the top cover is securely in place, you can plug your diffuser into a power outlet and turn it on using the "MIST" button. Your Rimports aroma speaker diffuser is now ready to use!
Hand-Painted Ties: Strong Aroma or Just Art?
You may want to see also
Fill with water
Filling your Rimports Aroma Diffuser with water is a simple process, but it must be done with care to avoid overfilling and potential damage to the device.
Firstly, ensure your diffuser is unplugged from the wall. It is important to always disconnect the power before attempting to fill or clean your diffuser. Once unplugged, remove the top cover of the diffuser by gently lifting it straight up and away from the base.
Now, you can begin filling the water reservoir. Use a measuring cup to fill the diffuser with up to 200mL of water. Do not fill beyond the 200mL mark or above the MAX fill line indicated inside the reservoir. It is important to follow this instruction to avoid overfilling, which can cause the diffuser to malfunction. For a stronger output of mist, you can use less water, filling only halfway to the MAX fill line.
After filling with water, you can add fragrance to your diffuser. Simply add up to 8 drops of your chosen essential oil to the water. Be careful not to add too many drops, as this can affect the performance of your diffuser. Always follow the instructions provided with your fragrance.
Once you have added water and fragrance, you can replace the top cover. Ensure it is properly seated and aligned before plugging the diffuser back into the power outlet and resuming use.
Aroma Beams: Optimal Placement for Maximum Fragrance
You may want to see also
Add essential oil
To add essential oil to your Rimports Aroma Speaker Diffuser, first ensure that the diffuser is unplugged from the wall. Then, remove the top cover and plug the power cord into the base.
Next, fill the diffuser with 200ml of water, being careful not to overfill it. For a stronger output, use less water.
Now you can add your essential oil. For fragrance, add up to 8 drops of essential oil to the water. Be careful not to add too many drops. Always follow the instructions provided with your fragrance.
Once you have added your essential oil, place the top cover back over the diffuser, ensuring that it is completely seated. Then, plug the diffuser into a 120 VAC electrical outlet and press the 'MIST' button to turn it on.
Enjoy the soothing aromas and therapeutic benefits of your essential oils!
Unlocking Your Doctor Aroma Diffuser: A Step-by-Step Guide
You may want to see also
Place top cover back on
To place the top cover back on your Rimports Aroma Speaker Diffuser, follow these steps:
- Ensure that the diffuser is unplugged from the power source before attempting to replace the top cover. This is important for your safety.
- Take the top cover and align it with the base of the diffuser. Make sure that it is correctly positioned and seated securely on the diffuser.
- Gently lower the top cover into place. Check that it is properly fitted and seated completely.
- Once the top cover is securely in place, you can proceed to the next step of operating your diffuser.
It is important to note that the top cover should be removed when filling the diffuser with water and adding essential oils. Always follow the instructions provided in your user manual for safe and proper use of your Rimports Aroma Speaker Diffuser.
Explore Aroma Putty: Scented Stress-Relieving Dough
You may want to see also
Plug into power outlet
To plug in your Rimports Aroma Speaker Diffuser, first ensure that the diffuser is unplugged from the wall. Then, remove the top cover. Next, fill the diffuser with 200ml of water, taking care not to overfill it. Once you have added the water, put up to 8 drops of essential oil into the water. After that, place the top cover back on the diffuser, making sure it is completely seated. Finally, plug the diffuser into a 120 VAC electrical outlet.
Unlocking Aromas: Navigating the Aroma Wheel
You may want to see also
Frequently asked questions
First, make sure the diffuser is unplugged from the wall. Then, to remove the top cover, press the "MIST" button to turn off the diffuser and disconnect it from the power outlet.
After filling the diffuser with water and adding essential oils, place the top cover over the diffuser, ensuring that it is completely seated.
Check that the top cover is properly aligned and positioned securely on the diffuser base. If the cover is not seated correctly, the diffuser may not produce mist or may leak.
No, it is not recommended to move the diffuser with fluid inside the reservoir as it may spill and cause damage. Always ensure the diffuser is properly emptied and cleaned before moving or storing it.
