Lance Carson
Uncrossing incense is used to rid yourself of negative energy, bad mojo, and harmful rituals. It is often used before any type of ritual work to clear away blockages and obstacles. To make uncrossing incense, you will need a charcoal disc, a heatproof bowl, and either salt or sand. Place the charcoal disc in the heatproof bowl and fill it with either salt or sand to disperse and heat. Light the charcoal disc and wait for about 5 minutes until it appears grey around the edges. Then, place a pinch of incense in the middle of the disc. The charcoal disc will give off heat for approximately 1 hour. You can also perform an uncrossing ritual with incense, a white candle, and herbs such as bay leaves and cinnamon. Start by visualizing a circle or taking three deep breaths to empty your mind. Light the white candle on your altar and place the bay leaves on a dish. Sprinkle the cinnamon on top and light two incense sticks, crossing them to symbolize the act of physically uncrossing all negative energies.
Characteristics and Values of Uncrossing Incense:
| Characteristics | Values |
|---|---|
| Purpose | Remove negative energy, crossed conditions, bad mojo, evil eye, harmful rituals, hexes, jinxes, and curses |
| Use | Spiritual cleansing, focusing the mind, clearing blocked energy, cleansing crystals and altar tools, celebrating the Sabbats |
| Ingredients | Herbs, resins, flowers, and spices |
| Weight | 15-22 grams |
| Use with | Charcoal disc |
| How to use | Place a charcoal disc in a heatproof bowl, fill with salt or sand to disperse and heat, light the charcoal disc, wait for it to turn grey around the edges, place a pinch of incense in the middle |
| Additional items | Candles, bay leaves, white flowers, milk, water, bath salts, oil, herbs |
| Timing | Burn daily or weekly, or for 3, 7, 9, or 21 days |
| Day | Tuesday for banishing and dissolving energies, Saturday for protection spells |
| Lunar Phase | Waning Moon |
Explore related products
What You'll Learn
Using charcoal discs
Charcoal discs are a common household item for those who enjoy burning incense. They are made from compressed sawdust and are used to ignite incense sticks or cones. Charcoal discs are ideal for burning incense indoors as they are odourless and burn without producing any ash.
To use a charcoal disc, you will need a heatproof container, a source of ignition, and some metal tongs. You can use a candle, lighter, or match to light the charcoal disc. If you are using an excelsior charcoal disc, you will see sparks when you apply a heat source. Once lit, place the disc into your container and wait a few minutes for it to heat up. Use a spoon to add a pinch of loose incense to the hot charcoal. You can add more as required.
It is important to note that charcoal discs burn at a high temperature and produce a lot of heat. Therefore, it is essential to burn them in a well-ventilated area to avoid any potential fire hazards. Always use a heat-resistant surface to avoid damaging your furniture. Charcoal can give off carbon monoxide, which is poisonous, so ensure your room is well-ventilated, especially if you are burning larger quantities of charcoal.
Each charcoal disc will burn for about 20-30 minutes. You cannot reuse charcoal discs, as they are designed for single use only. To extend the lifespan of your charcoal discs, store them in a cool, dry place away from direct sunlight and moisture.
Incense and Dogs: What Pet Owners Should Know
You may want to see also
Explore related products
Ingredients and measurements
Uncrossing incense is used to remove negative energy, cleanse crystals, and celebrate the Sabbats. It can be burned daily or weekly, and the best lunar phase for an uncrossing ritual is the Waning Moon, which occurs on the days after the Full Moon.
The ingredients used to make uncrossing incense include a blend of herbs, resins, flowers, and spices. Bay leaves, Frankincense, Cinnamon, Rue, John the Conqueror root, Chamomile, Black pepper, Cayenne pepper, and Hyssop are all considered helpful when uncrossing and removing hexes, curses, and negative energies.
Moon Goddess Garden sells uncrossing incense in bags that measure approximately 2 1/4” x 3” and weigh between 15-22 grams. Lucky Mojo also sells uncrossing incense powders in 1 oz. foil packets.
To use the uncrossing incense, place a charcoal disc in a heatproof bowl and fill it with either salt or sand to disperse and heat. Simply light the charcoal disc and wait for about 5 minutes until it appears grey around the edges. Then, add a pinch of incense to the middle of the disc. The charcoal disc will give off heat for approximately 1 hour.
Incense Odor on Furniture: Tips for Quick Removal
You may want to see also
Explore related products
Lighting and burning instructions
To light and burn uncrossing incense, follow the steps outlined below:
Firstly, decide whether you will be using stick incense or incense cones. If you opt for stick incense, you can choose to light it while holding it or after placing it into an incense burner. For incense cones, place the cone in a heat-proof container or incense burner with the pointy end facing upwards.
Now, light the incense. For stick incense, light the end of the stick with a match or lighter, ensuring the incense is immersed in the flame until a small flame is visible. If using incense cones, bring a match or lighter to the tip of the cone until it glows orange and a small flame appears.
Once the incense is lit, allow the flame to burn for a few seconds before gently fanning or blowing it out. If you are using stick incense, you should see a small glowing ember, indicating that the incense is ready. For incense cones, the tip of the cone should have an orange glow, and the flame should disappear, leaving the tip glowing.
If you are performing an uncrossing ritual, you may choose to visualise a circle or take three deep breaths to clear your mind. You can also light a white candle on your altar and place bay leaves with cinnamon on a dish to enhance the ritual.
Remember, the burning time for incense varies depending on its type and quality. Stick incense typically burns for 20-40 minutes, while cones may have a similar burning time but produce heavier and stronger smoke. If you need to put out the incense before it burns out, you can snuff the lit end against a heat-resistant surface or use sand, salt, white ash, or rice to extinguish the flame.
The Art of Incense: Natural Scents and Their Benefits
You may want to see also
Explore related products
Removing negative influences
Incense has been used for thousands of years for spiritual cleansing, focusing the mind, and clearing blocked energy. Uncrossing incense is used to remove negative energy, curses, hexes, and bad mojo. It can also be used to reverse harmful rituals and protect against the evil eye.
To make uncrossing incense, you will need a blend of herbs, resins, flowers, and spices. Some of the most commonly used ingredients include bay leaves, frankincense, cinnamon, rue, chamomile, black pepper, cayenne pepper, and hyssop. These ingredients are believed to have protective and cleansing properties.
- Prepare your ingredients: Gather the herbs, resins, flowers, and spices you wish to use. You can buy pre-made uncrossing incense or create your own blend by mixing and matching the ingredients mentioned above.
- Set up your space: Choose a safe and sacred space to perform your ritual. You will need a heatproof bowl, a charcoal disc, and either salt or sand to disperse and heat. Place the charcoal disc in the heatproof bowl and fill it with salt or sand.
- Light the charcoal disc: Simply light the charcoal disc and wait for it to turn grey around the edges, which should take approximately five minutes. The disc will give off heat for about an hour, so you will have plenty of time for your ritual.
- Burn the incense: Place a pinch of your uncrossing incense blend in the middle of the charcoal disc. You can also add a few drops of uncrossing oil to enhance the effects, but be cautious as adding too much oil may hinder proper burning.
- Perform the uncrossing ritual: Allow the incense to burn and its smoke to purify your space and remove negative influences. You can perform this ritual in conjunction with other uncrossing practices, such as taking an uncrossing bath, using uncrossing herbs or oils, or reciting prayers or charms to enhance the effects.
- Dispose of the remains: Once the incense and charcoal disc have finished burning, properly dispose of the remains. You can bury or compost them while giving thanks for the release of negative energies.
Remember, it is always important to be cautious when performing any ritual. Do not leave burning incense unattended, and ensure you follow safety guidelines to prevent fires or injuries. Additionally, be mindful of the smell of the incense. While scent preference varies, a strong or unpleasant aroma may indicate the presence of negative energies.
Burning White Sage Incense: Safe or Not?
You may want to see also
Explore related products
Uncrossing rituals and spells
Uncrossing incense is a key component of these rituals, and is often used alongside other tools such as candles, herbs, oils, and crystals. The incense is typically made from a blend of herbs, resins, flowers, and spices, and is burned on a charcoal disc in a heatproof bowl. The smoke of the incense is believed to cleanse and purify the space and the individuals involved in the ritual.
To perform an uncrossing ritual with incense, it is recommended to begin by gathering the necessary materials and preparing the space. This may include setting up a bath or shower, as some uncrossing rituals involve pouring water over oneself. The incense is then lit, and its smoke is allowed to waft over the participants as they pray or meditate on their intentions, such as releasing negative energies or breaking free from hexes, curses, or jinxes.
For example, one uncrossing ritual involves lighting incense and a white candle, and using herbs like bay leaf and cinnamon, which are believed to have protective and healing properties, respectively. The incense and candle are allowed to burn completely, and the ritual can be repeated for seven consecutive days for particularly strong energies. After the ritual, the remains of the incense and candles are buried or disposed of respectfully.
Uncrossing rituals can be personalized and adapted to suit the specific needs and beliefs of the individual. It is important to note that the choice of tools and methods may vary depending on cultural and spiritual traditions.
Cleansing with Incense: What to Chant and Whisper
You may want to see also
Frequently asked questions
Uncrossing incense is used to remove negative energy, bad mojo, and harmful rituals, hexes, or jinxes. It is often used before any type of ritual work to clear away blockage and obstacles.
Place a charcoal disc in a heatproof bowl and fill it with either salt or sand to disperse and heat. Light the charcoal disc and wait for about 5 minutes until it appears grey around the edges. Then, place a pinch of incense in the middle of the disc. The charcoal disc will give off heat for about 1 hour.
You can burn uncrossing incense daily. It is also traditional to burn incense in runs of 3, 7, 9, or 21 days as those are considered lucky numbers.
