Clean Your Hathaspace Marble Diffuser: A Step-By-Step Guide

The Hathaspace Marble Essential Oil Aroma Diffuser is a stylish and elegant addition to any home, with its Italian marble finish and BPA-free plastic design. To keep it in optimal condition, regular cleaning is required.

For a routine clean, unplug the diffuser and empty the reservoir of any leftover water and oil. Clean the interior with a paper towel dampened with white vinegar or a mild soap and water solution. To clean the ultrasonic plate or chip, use a cotton swab dipped in rubbing alcohol to remove any excess oil. Finally, dry and reassemble the diffuser.

For a deep clean, unplug and empty the diffuser, then fill it halfway with plain water and add 10 drops of distilled white vinegar. Plug the diffuser back in and let it run for 10-15 minutes. Unplug and empty the solution, then wipe down the reservoir and ultrasonic plate or chip with a soft cloth and rubbing alcohol. Finally, wipe down the exterior with a damp cloth, reassemble, and your diffuser is ready to use!

Unplug the diffuser before cleaning

Unplugging the Hathaspace Marble Essential Oil Aroma Diffuser before cleaning is a crucial safety precaution. Keeping the diffuser plugged in while cleaning is a safety hazard and could potentially damage the appliance.

Unplugging the diffuser is the first step in both the routine and deep cleaning processes. After unplugging, the next step is to empty any water and essential oils from the reservoir. This is important because water left standing can develop mould and mildew spores.

The diffuser should be deep cleaned at least once a month to keep it working optimally. During the deep cleaning process, the diffuser should be unplugged and emptied before being filled halfway with plain water and 10 drops of distilled white vinegar. The diffuser is then plugged back in and left to run for 10-15 minutes so that the vinegar solution can cut through any built-up oils in the tank.

After the deep cleaning process is complete, the diffuser should be unplugged and emptied again before being wiped down and dried with a soft cloth.

Empty and clean the reservoir

To clean the Hathaspace Marble Essential Oil Aroma Diffuser, start by unplugging the device and emptying the reservoir. Water that is left standing can develop mould and mildew spores. Next, wipe out the interior of the diffuser with a paper towel that has been dampened with white vinegar. This will prevent oil from mixing with the next oil you use, and will also prevent corrosion. If you don't have vinegar, you can use water with a dot of all-natural dish soap instead.

After this, it's important to clean the ultrasonic plate or chip. This is the part of the diffuser that breaks down the oils so that the water can disperse the molecules into the air. To clean this part, dip a cotton swab into some rubbing alcohol and rub it over the plate or chip to remove any excess oil build-up.

Finally, dry and reassemble the diffuser before refilling and reusing.

Clean the ultrasonic plate or chip

To clean the ultrasonic plate or chip of your Hathaspace Marble Essential Oil Aroma Diffuser, you will need a cotton swab and some rubbing alcohol.

Firstly, unplug the diffuser for safety. Next, dip a cotton swab into the rubbing alcohol and rub it over the ultrasonic plate or chip to remove any excess oil build-up. The ultrasonic plate or chip is an important component as it breaks down the oils so that the water can disperse the molecules into the air. Finally, wipe the diffuser out with a dry paper towel and reassemble before use.

It is recommended to clean the ultrasonic plate or chip after every use to prevent oil build-up and keep your diffuser working at an optimal level.

Dry and reassemble the diffuser

After deep cleaning your Hathaspace Marble Essential Oil Aroma Diffuser, it's time to dry and reassemble it.

Firstly, wipe the diffuser out with a dry paper towel. Make sure to get into all the nooks and crannies to soak up any excess water or vinegar. Once you're happy that it's completely dry, you can start reassembling it.

Slot all the parts back together, ensuring everything is securely in place. Once your diffuser is reassembled, you can refill it with water and a few drops of your favourite essential oil, and it's ready to use again.

Deep clean at least once a month

To deep clean your Hathaspace Marble Essential Oil Aroma Diffuser, you should:

Unplug the appliance:

Always unplug the diffuser before cleaning, as it is a safety hazard to keep it plugged in and running.

Empty the diffuser:

Water that is left standing can develop mould and mildew spores.

Fill the diffuser with plain water and add vinegar:

Fill the diffuser half full with plain water and add 10 drops of distilled white vinegar. Do not use any other type of vinegar or cleaner in the tank.

Run the diffuser for 10-15 minutes:

This allows the vinegar and water to cut through built-up oils in the tank.

Empty the solution and dry the reservoir:

Use a soft cloth to wipe down and thoroughly dry the reservoir.

Wipe down the ultrasonic chip or plate with a cotton swab dipped in rubbing alcohol:

This step will remove any excess oil build-up.

Wipe down the exterior:

Use a cloth dampened with plain water to wipe down the exterior of the unplugged diffuser.

Reassemble and refill:

Once the diffuser is dry, reassemble the parts and plug it in to refill and use.

Deep cleaning your Hathaspace Marble Essential Oil Aroma Diffuser at least once a month will keep it working at an optimal level.

Frequently asked questions