Clean Your Dawn Aroma Humidifier: Step-By-Step Guide

The doTERRA Dawn Aroma Humidifier is designed to create a comfortable environment in any room by maintaining ideal humidity levels and allowing you to enjoy the scents of your favourite essential oils. To keep your Dawn Aroma Humidifier in good working condition, it is important to clean it regularly. This guide will take you through the steps to clean your Dawn Aroma Humidifier, helping to prevent mould and residue buildup, and ensuring optimal performance.

Disassemble the humidifier

To disassemble the doTERRA Dawn Aroma Humidifier, first, turn off the machine and unplug it from the power source. Next, empty the water tank and remove any essential oils that may be inside. The Dawn Aroma Humidifier has a convenient top-fill feature, so you won't need to remove any lids or covers to access the water tank and add water or oil.

Once the water tank is empty, you can start detaching the removable parts. Remove the air filter if your humidifier has one. It is important to replace the filter regularly, especially if it develops a hard crust, gives off an odour, or the moisture output decreases.

After removing the filter, you can proceed to detach other removable parts, such as the water tank cap. If your humidifier has a valve on the bottom of the tank, you can manually press the release button to allow any remaining water or oil to drain out.

For a thorough cleaning, make sure to disassemble the humidifier completely, separating all removable parts and checking the owner's manual if needed. This will ensure that each piece can be cleaned effectively and that you can reach all the corners and crevices.

Remember to clean your Dawn Aroma Humidifier at least once a week, especially if you or anyone in your household has respiratory problems. Regular cleaning will help prevent the growth of bacteria, mould, and other microbes, ensuring that your humidifier provides a healthy and comfortable environment for a good night's rest.

Clean the reservoir

To clean the reservoir of your Dawn Aroma Humidifier, follow these steps:

Firstly, always unplug the diffuser before cleaning. It is a safety hazard to keep it plugged in while cleaning. Next, empty the diffuser after each use. Standing water can develop mould and mildew spores.

To clean the reservoir, wipe out the interior with a paper towel dampened with white vinegar. This will prevent any leftover oil from mixing with the next oil you use, and will also prevent any corrosion on the diffuser's parts. You can substitute vinegar with water and a dot of all-natural dish soap.

If you want to deep clean the reservoir, unplug the appliance and empty any standing water and essential oils. Never submerge any part of the diffuser in water or get excess moisture into any control buttons. Fill the reservoir halfway with plain water, and add 10 drops of distilled white vinegar. Do not use any other type of vinegar or cleaner in the tank. Plug the diffuser back in and run it for 10-15 minutes to let the vinegar and water cut through built-up oils in the tank.

Finally, unplug the diffuser and empty the vinegar and water solution. Use a soft cloth to wipe down and thoroughly dry the reservoir.

Clean the ultrasonic plate

To clean the ultrasonic plate of your Dawn Aroma Humidifier, follow these steps:

• Unplug the humidifier and remove the power cord.
• Disassemble the humidifier by separating the reservoir, tank, and nebulizer.
• If there is any remaining water in the reservoir or tank, empty it.
• Check the inside surface of the reservoir. If there is a slimy film, it indicates bacterial growth.
• Take the reservoir to the sink and pour in undiluted white vinegar. Swish the vinegar around to coat the interior and let it sit for 20 minutes. You can also use chlorine bleach for this step.
• Fill the tank halfway with diluted vinegar and allow it to sit for about 30 minutes.
• Use a soft brush or a toothbrush to scrub away any film, stains, or scales on the surface of the reservoir and tank.
• Rinse both the reservoir and tank with warm tap water. Repeat the entire process if necessary.

Remember to clean your ultrasonic plate at least once a week to prevent the growth of bacteria and the buildup of mineral deposits.

Dry and reassemble

Once you've finished cleaning your Dawn Aroma Humidifier, it's important to ensure that all components are completely dry before reassembling the device. Use a dry paper towel to wipe down the interior of the humidifier, as well as the exterior of the device. Make sure to dry the ultrasonic plate or chip, as this component is responsible for breaking down the oils so that they can be dispersed into the air.

After ensuring that all parts are thoroughly dried, you can proceed to reassemble your Dawn Aroma Humidifier. The device is designed for easy disassembly and reassembly, so you shouldn't have any trouble putting it back together. Simply follow the reverse steps of the disassembly process, making sure that all components are securely connected.

It is important to note that you should not reassemble the humidifier if any parts are still wet or damp. This can promote the growth of mould and mildew, which can be harmful to your health when inhaled. Always take the time to ensure that your humidifier is completely dry before reassembling and using it again.

Additionally, it is recommended to perform a deep cleaning on your Dawn Aroma Humidifier at least once a month. This involves filling the diffuser halfway with plain water, adding 10 drops of distilled white vinegar, and running it for 10 to 15 minutes. This process helps to remove any built-up oils and ensure that your humidifier is functioning optimally.

By following these cleaning and drying instructions, you can ensure that your Dawn Aroma Humidifier is well-maintained and provides you with a pleasant and safe aromatherapy experience.

Deep cleaning

To deep clean your Dawn Aroma Humidifier, you should:

Unplug the appliance:

This is a safety precaution as it can be dangerous to keep the diffuser plugged in while cleaning.

Empty the water reservoir:

Pour out any remaining water and oil. It is important to do this after every use as standing water can develop mould and mildew spores.

Fill the reservoir with plain water and vinegar:

Fill the tank halfway with water and add 10 drops of distilled white vinegar. Do not use any other type of vinegar as it may damage the appliance.

Run the diffuser for 10-15 minutes:

This allows the vinegar and water solution to cut through and remove any built-up oils in the tank.

Unplug and empty the appliance again:

After running the diffuser for a short time, unplug it and pour out the vinegar and water mixture.

Dry the reservoir:

Use a soft cloth to thoroughly wipe down and dry the inside of the reservoir.

Clean the ultrasonic chip:

Use a cotton swab dipped in rubbing alcohol to clean the ultrasonic chip or plate. This is an important step as the ultrasonic chip breaks down the oils so that they can be dispersed into the air.

Wipe down the exterior:

Use a cloth dampened with plain water to wipe down the outside of the diffuser.

Reassemble and refill:

Once all the parts are dry, reassemble the diffuser, refill it with water and oil, and plug it in.

It is recommended that you deep clean your diffuser at least once a month to keep it working optimally and prevent a build-up of dust and oil.

Frequently asked questions