The Best Way To Clean Your Breville Aroma Coffee Machine

Keeping your coffee machine clean is essential to ensure the best flavour and aroma from your coffee. The Breville Aroma Style Electronic Drip Coffee Maker is a drip coffee machine with a stainless-steel mesh filter basket, brew strength control, and a non-drip valve system. To keep your machine in good condition, it's important to perform regular cleaning and maintenance. This includes tasks such as cleaning the portafilter, rinsing the group head, and wiping down the steam wand after each use. In addition, deeper cleaning should be done every 1-2 months, including using the machine's built-in cleaning cycle with the provided cleaning disk and tablets.

Cleaning the filter basket

To clean the filter basket of your Breville coffee machine, you will need to disassemble your portafilter, removing the spouts and any covers. Once disassembled, use a green scrubby square to thoroughly scour the inside surfaces of the portafilter body and the spouts. Do not use the scrubby on your basket, as this may enlarge the holes.

Next, find a large container and fill it with enough water to submerge the portafilter and its basket. Add some cleaning detergent to the water and stir to dissolve. Refer to the directions on your detergent to get the correct dosage for the volume of water. Place the portafilter parts into the detergent water and let them soak for at least half an hour.

After soaking, rinse all parts with clean water and repeat the green scrubby scour. Finally, wipe the parts dry with a dishrag or microfiber cloth.

If your portafilter spouts are of the open-slot type, visually inspect them to ensure no oils remain. Use a small round brush to scrub them clean if necessary. A baby bottle nipple brush is a cheap and effective option. Reassemble the portafilter, and you're done!

It is important to note that you should not submerge the plastic, Bakelite, or rubber handle of the portafilter in water, as this can cause damage to the handle.

Clearing the drip tray

To keep your Breville Aroma Style coffee machine in good condition, it is important to clean it regularly. One of the key areas to focus on is the drip tray, which needs to be emptied and cleaned after each use to prevent build-up over time. Here is a step-by-step guide on how to clear the drip tray:

After each use, open the drip tray by pulling it out gently from the front of the machine. Be careful not to spill any liquid that may be in the tray. If your machine has a non-drip valve, make sure to interrupt the brewing cycle before removing the drip tray to avoid messes. Once the tray is pulled out, you will notice that it is filled with water or coffee residue, depending on the last time you used the machine.

Take the drip tray to your sink and carefully pour out the contents into the drain. Rinse the drip tray with clean water to remove any coffee stains or residue. Use a soft-bristle brush or a soft cloth to wipe away any stubborn stains or residue. Ensure that you clean all the corners and edges of the drip tray thoroughly.

After rinsing and wiping the drip tray, dry it with a soft, absorbent cloth or towel. Make sure that the drip tray is completely dry before placing it back into the machine. Reinsert the drip tray by sliding it gently back into its original position. Once the drip tray is secure, you can continue with your coffee brewing or turn off your machine until the next use.

By following these simple steps after each use, you will be able to keep your Breville Aroma Style coffee machine's drip tray clean and well-maintained. This will not only ensure the optimal performance of your machine but also enhance the taste of your coffee. Remember to be gentle and careful during the entire process to avoid any damage to the drip tray or the machine itself.

Descaling the machine

Descaling your Breville Aroma Style coffee machine is an important step in keeping your machine in good condition and ensuring your coffee tastes its best. The Barista Express® model has a self-monitoring cleansing and descaling cycle that will notify you when it's time to descale. For other models, descaling should be done regularly as part of your machine's maintenance.

To descale your machine, you'll need to:

• Prepare a descaling solution: You can use a store-bought espresso machine descaling solution, or make your own using equal parts water and vinegar. Fill your water tank with this solution, up to the maximum line.
• Run the descaling cycle: Power on your machine and run it as if you were brewing coffee. This will run the descaling solution through the machine. Place a large bowl or container below the machine to catch the solution as it exits. Run the machine until all the solution has been used.
• Rinse the machine: After descaling, it's important to remove any residual solution from your machine. Run a full cycle using only water. You may need to do this more than once to ensure your machine is thoroughly rinsed.
• Inspect and repeat if needed: Check your machine for any remaining coffee residue, mineral buildup, or stains. If necessary, wipe down with a clean, damp cloth or run another rinse cycle.

By following these steps, you'll keep your Breville Aroma Style coffee machine in optimal condition and ensure your coffee always tastes great!

Cleaning the steam wand

To clean the steam wand of your Breville Aroma Style coffee machine, follow these steps:

Firstly, it is important to clean and unblock the steam wand after each use. This will ensure your machine is always ready to steam milk and prevent milk buildup. Start by purging the steam wand. Release a small amount of steam into a towel to remove any milk residue from the wand.

Next, wipe down the wand with a damp rag or cloth. Be sure to do this immediately after use, as milk can quickly harden and become difficult to remove. For easier cleaning, you can insert the wand into a pitcher or glass of clean water and steam for a few seconds before wiping. Additionally, blow out a little steam after removing the wand from the milk to prevent milk from travelling up into the wand.

Finally, for a deeper clean, you can use a store-bought espresso cleaning solution or a mixture of vinegar and water. Run this solution through the steam wand and then run a second cycle with only water to ensure the machine is purified before your next use.

Changing the water filter

To change the water filter, start by purchasing the correct replacement filter for your specific Breville coffee machine model. You can find the compatible filters on the Breville website or through authorised retailers. Before installing the new filter, be sure to consult the user manual for your specific Breville coffee machine model, as the process may vary slightly between machines.

Once you have the new filter, locate the water filter compartment in your machine. This is typically located near the water tank. Turn off and unplug the machine from the power outlet. Open the water filter compartment and remove the old filter carefully, disposing of it according to your local waste management guidelines.

Now, take the new water filter out of its packaging and insert it into the water filter compartment, following the instructions provided by Breville. Ensure that the filter is securely fitted and aligned correctly according to the user manual. Close the water filter compartment and turn on the machine.

After changing the water filter, it is recommended to run a rinse cycle with fresh water to flush out any air or loose particles that may be present in the new filter. Run the rinse cycle once or twice, and then your Breville coffee machine is ready to brew delicious coffee again!

Frequently asked questions