Complete Guide To Adding Fragrance In 464 Wax

When making candles, it's important to get the right amount of fragrance for your wax. In this case, we're looking at 464 wax, which can hold a high fragrance load, typically between 6% and 10%. However, the ideal amount of fragrance will depend on the type of fragrance oil being used and the desired strength of the scent. Too much fragrance can cause burn issues and may not result in a stronger scent.

The ideal fragrance load for 464 wax is between 6% and 10%

The amount of fragrance you use will depend on the fragrance itself. Some fragrance oils need 10%, while others don't. It's important to use fragrances that have been developed and tested for use in candles.

To achieve a smooth finish on your candles, pour the wax at temperatures between 130° to 145° and allow the candles to cool as slowly as possible. Using a heat gun can also help smooth out the tops of finished candles.

To ensure the fragrance fully binds and mixes with the wax, allow the wax to reach 185°F before mixing in your fragrance, then remove it from the heat source.

The amount of fragrance depends on the type of fragrance oil

The maximum fragrance load for 464 wax is 10%, but using that much fragrance is not always ideal. Too much fragrance, especially dense fragrances, can cause burn issues and may not result in a stronger scent. It's important to use fragrances that are specifically developed and tested for use in candles.

Golden Brands GW 464 Soy Wax Flakes can hold a high fragrance load, typically between 8% to 10%, allowing for richly scented candles. However, some people find that using 8% fragrance load is overpowering. It's important to test different fragrance loads to find the right balance for the specific fragrance oil being used.

The ideal fragrance load may also depend on the desired finish of the candle. To achieve a smooth finish, it's recommended to pour the wax at temperatures between 130° to 145° and allow the candles to cool as slowly as possible. Using a heat gun can also help smooth out the tops of finished candles.

The wax should reach 185°F before mixing in the fragrance

When making candles with 464 wax, it's important to heat the wax to 185°F before mixing in the fragrance. This is the ideal temperature for the wax to fully bind with the fragrance oil, ensuring a strong scent without overheating the mixture and losing any fragrance.

The recommended fragrance load for 464 wax is typically between 6% and 10%, with 6% being a good starting point for most fragrances. However, it's important to note that the ideal fragrance load can vary depending on the specific fragrance oil being used. Some fragrance oils may require as little as 6% to achieve a strong scent, while others may need up to 10%. It's always best to start with a lower percentage and increase as needed, as too much fragrance can cause burn issues and may not result in a stronger scent.

To achieve a smooth finish on your candles, it's recommended to pour the wax at temperatures between 130° and 145°. Allowing the candles to cool slowly will also help to create a smooth, even surface. If you're looking for a high-quality, reliable wax that can hold a high fragrance load, Golden Brands GW 464 Soy Wax Flakes are a great option. They can hold between 8% and 10% fragrance, resulting in richly scented candles.

When working with 464 wax, it's important to be mindful of the temperature, as this wax can slightly melt during shipping and storage in hotter months. By following these guidelines and adjusting the fragrance load as needed, you can create candles with a strong, pleasant scent and a smooth, professional finish.

The wax should be poured at a temperature between 130° and 145°

To achieve the best results, it is recommended to use fragrances that have been specifically developed and tested for use in candles. The amount of fragrance you use will depend on the type of fragrance oil you are using and the desired strength of the scent. A good starting point is to use a 6% fragrance load, which is approximately 1 oz per lb of wax. This percentage can be adjusted depending on the fragrance, with some requiring up to 9-10% for a stronger scent. However, it is important to note that too much fragrance, especially dense fragrances, can cause burn issues and may not result in a stronger scent.

When working with 464 wax, it is recommended to allow your wax to reach 185°F before mixing in your fragrance. This temperature ensures that the fragrance fully binds and mixes with the wax while also preventing any loss of fragrance due to heat.

It is also worth noting that during the hotter months of the year, 464 wax can slightly melt during shipping due to its low melting point. Therefore, it is important to consider the temperature and shipping conditions when working with this type of wax.

Too much fragrance can cause burn issues

The maximum fragrance load for 464 wax is 10%, but it's not always ideal to use that much. The amount of fragrance you use will depend on the type of fragrance oil. Some fragrance oils need 10%, while others don't. For some fragrances, you might need to kick it up to 9-10%, while for others, 6% is super strong.

Golden Brands GW 464 Soy Wax Flakes can hold a high fragrance load, typically between 8% to 10%, allowing for richly scented candles. However, one user on Reddit said that using 8% with 464 wax seemed like it would create an overpowering candle.

To avoid burn issues, it's important to find the right balance of fragrance load for your specific candle. Always use fragrances that are developed and tested for use in candles.

Frequently asked questions