Adding Base To Aroma: How Much Is Too Much?

Aromas are added to the base in the form of flavour concentrates. The proportion of aroma to base depends on the desired strength of the e-liquid. It is recommended to start with around 12% aroma or concentrate and 3% additive (if required) and then adjust accordingly. The flavour part of the e-liquid usually accounts for around 5 to 20% of the total product. For example, to make a 30ml bottle of finished liquid, one would need 10ml of flavour and 20ml of base.

How much base to add to 20ml aroma for a 50/50 PG/VG mix

When preparing e-liquids, the base constitutes 80 to 90% of the mixture, while the aroma represents between 5 to 20% of the final product. The recommended dosage for aroma is 10%.

To prepare a 50/50 PG/VG mix with a 20ml aroma, you will need to add 30ml of base to reach a total volume of 50ml. This will result in a final product with a nicotine concentration of 0mg/ml.

If you wish to add nicotine to your mixture, you can use a nicotine booster. The nicotine booster is added to the neutral base to increase the nicotine concentration. The volume of the booster will depend on your desired nicotine strength.

It is important to note that the maturation phase is crucial to allow the flavours to develop fully. You should shake the bottle after preparing the mixture and let it rest for at least 48 hours before use.

How much base to add to 20ml aroma for a 70/30 PG/VG mix

Mixing your own e-liquid can be a fun and cost-saving process. The main ingredients of e-liquid are vegetable glycerin (VG), propylene glycol (PG), aroma/flavouring and optionally, nicotine. The ratio of VG to PG affects the vaping experience, with VG producing more vapour and PG providing more flavour and a stronger throat hit.

To achieve a 70/30 PG/VG mix, you will need to add 70% PG and 30% VG to your aroma/flavouring. The amount of base you need to add will depend on the strength of your aroma/flavouring and the desired strength of your e-liquid.

For example, if you are using a 100% concentrated aroma/flavouring and want to end up with a 20ml e-liquid that is 10% aroma/flavouring by volume, you will need to add 18ml of base (70/30 PG/VG mix) to your 2ml of aroma/flavouring.

If you are adding nicotine to your e-liquid, you will need to take this into account when calculating your base amounts. The desired nicotine strength of your e-liquid will determine how much nicotine to add.

It is important to allow your mixed e-liquid to steep for a period of time before use, so that the flavours can develop fully. This can take anywhere from a few days to a few weeks, depending on the complexity of the recipe.

How much base to add to 20ml aroma for a 100% PG mix

Mixing your own e-liquid allows you to create a blend of flavours that you find enjoyable. To make a 100% PG mix, propylene glycol will make up your entire base.

The first step is to decide on the desired strength of your e-liquid. This will determine the amount of nicotine in your mixture. If you are heavily dependent on nicotine, a dosage of 18 mg/ml is recommended. For moderate dependence, 12 mg/ml is suggested. For slight dependence, 3 to 6 mg/ml will suffice, and for no dependence, nicotine-free e-liquids are available.

Once you have determined the nicotine strength, you can calculate the amount of aroma to add. The aroma will typically represent between 5% and 20% of the total mixture, depending on the desired strength of the aroma.

For a 20ml aroma and a 100% PG mix, you would need to add 80ml of the propylene glycol base. This calculation is based on the assumption that the aroma will make up 20% of the total mixture.

It is important to note that the maturation phase is crucial to the process. The mixture should be left to rest for at least 48 hours to allow the flavours to develop correctly.

Additionally, it is recommended to start with a single aroma per formulation and adjust the percentage of aroma based on your personal preference.

How much base to add to 20ml aroma for a 100% VG mix

Mixing your own e-liquid can be a fun and interesting process, and it can also be more cost-effective than buying pre-mixed e-juice. The base of an e-liquid can be 100% propylene glycol, 100% vegetable glycerine (VG), or a mix of the two. PG gives more flavour and a stronger throat hit, while VG produces more vapour. Aromas are added in the form of flavour concentrates, with thousands of options available on the market.

If you want to make a 100% VG mix, you will need to use a 100% VG nicotine base. The amount of nicotine in the base will depend on your preference. You can buy nicotine bases with different strengths, or you can add a nicotine booster to a nicotine-free base.

The amount of aroma to add to your mix will depend on the particular aroma you are using and your personal preference. Aromas typically come with a recommended dosage, which you can use as a starting point. For example, some aromas recommend a dosage of 3-5%, while others suggest 15-20%. You may need to experiment with different percentages to find the right strength for your taste. It is recommended to start with around 12% aroma and then adjust accordingly.

In general, the flavour part of your e-liquid will account for around 5 to 20% of the total product. So, for a 20ml aroma, you would need to add 80ml of base to make a total of 100ml of e-liquid. However, this may vary depending on the strength of the aroma and your personal preference.

Once you have mixed your e-liquid, it is important to let it steep for a while so that the flavours can develop fully. This can take anywhere from 48 hours to several weeks, depending on the type of aroma. Fruit flavours typically need less time, while tobacco flavours may need to steep for up to a month.

It is also important to take safety precautions when handling nicotine bases. Always wear gloves and protective eyewear, and keep your nicotine bottles in a safe place out of the reach of children.

How much base to add to 20ml aroma for a 6mg nicotine strength

To achieve a 6mg nicotine strength, you will need to add a certain amount of nicotine booster to your aroma. The amount of nicotine booster required will depend on the volume of your aroma and the strength of the nicotine booster.

For example, if you have a 30ml bottle of juice, you will need to add half a 10ml bottle of nicotine booster to achieve a 3mg nicotine strength. To reach a 6mg nicotine strength, you would need to double the amount of nicotine booster, thus adding a full 10ml bottle of nicotine booster to your 30ml bottle of juice.

Similarly, if you have a 60ml bottle of juice, you will need to add one 10ml bottle of nicotine booster for a 3mg nicotine strength, and two 10ml bottles of nicotine booster for a 6mg nicotine strength.

It is important to note that adding too many nicotine boosters can dilute the flavour of your aroma. To avoid this, you can try adding your aroma to an empty chubby bottle, leaving enough space to add 20ml of e-liquid and a 10ml nic shot. This method will allow you to create a 6mg nicotine strength without losing flavour.

When handling nicotine boosters, it is crucial to take safety precautions as nicotine is a dangerous product even when diluted. Always wear gloves and protective glasses, and store your nicotine bottles in a safe place out of direct light.

Frequently asked questions