Aroma Diffuser: Pure Care Activation Guide

The Pure Daily Care Aroma Diffuser is a teardrop-shaped device that uses state-of-the-art wave diffusion technology to atomize essential oils. It features ambient lighting with adjustable intensity, timer settings, and an auto-shutoff feature for low water levels. To turn on the Pure Daily Care Aroma Diffuser, simply fill the diffuser with clean water between the min/max line, add a few drops of essential oil, replace the cover, and press the mist button. One press will activate the diffuser for one hour, and it will automatically turn off after the selected duration.

Filling the diffuser with water

Filling the Pure Daily Care Aroma Diffuser with water is a simple process. First, remove the top of the diffuser by lifting it off. You may need to rotate or pop it off, depending on the model. Once the top is removed, you will have access to the water tank.

The next step is to fill the water tank with lukewarm or room-temperature water. Avoid using hot water, as this can affect the diffusion process. Fill the tank up to the maximum level indicated by the "max" line inside the tank. Do not overfill the tank, as this can cause leakage.

After filling the tank, you can add 6-8 drops of your favourite essential oil. You can choose from a variety of oils, such as lavender, eucalyptus, tea tree, orange, peppermint, lemongrass, jasmine, nutmeg, clove, or spearmint. These oils are formulated with high-quality plants and have no added fillers or additives.

Once you have added the desired amount of oil, simply replace the top of the diffuser and plug it into a power outlet. The diffuser also includes a convenient auto shut-off feature for low water levels, so you don't have to worry if you forget to turn it off.

With its 300 ml capacity and state-of-the-art wave diffusion technology, the Pure Daily Care Aroma Diffuser is a great way to enjoy the aromatic benefits of essential oils and create a relaxing atmosphere in your home or office.

Adding essential oils

It is important to note that the specific steps for adding essential oils to your Pure Care Aroma Diffuser may vary depending on the model you have. Be sure to refer to the instruction manual for detailed instructions on how to use your particular model. Additionally, always remember to unplug your diffuser before filling it with water to avoid any accidents.

When choosing essential oils, opt for high-quality, pure essential oils that are labelled for aromatherapy use. Avoid oils that have been produced using harsh solvents. If you have any pets, be sure to check with your veterinarian before using an essential oil diffuser, as certain oils may be toxic to animals. Similarly, if you have any allergies, be sure to choose oils that do not trigger your allergies.

Replacing the top of the diffuser

To replace the top of the Pure Daily Care Aroma Diffuser, start by removing the top of the diffuser. This may differ slightly depending on the type of diffuser you have, but most will have a top casing that can be lifted off to reveal the reservoir. Try rotating, popping, or simply lifting the top of the diffuser to open it and access the internal water tank. If you are unsure how to open your diffuser, check the manufacturer's guide for instructions specific to your diffuser.

Once the top of the diffuser is removed, you will have access to the reservoir or internal water tank. Fill the reservoir with room-temperature water, being careful not to overfill it. Most diffusers will have a fill line or marker inside the tank to indicate the maximum water level.

After filling the reservoir with water, you can add your essential oils. For the Pure Daily Care Aroma Diffuser, add 6-8 drops of your chosen oil or oil blend. You can combine different types of essential oils, but be sure to use a light touch to avoid an overpowering aroma.

Once you have added your desired amount of essential oil, replace the top of the diffuser. Ensure that the lid or casing is sitting properly and securely before turning on the diffuser.

To turn on the Pure Daily Care Aroma Diffuser, press the mist button on the front of the device. One press will turn it on for one hour, after which the diffuser will automatically turn off. You can also press the button twice for three hours, three times for six hours, or four times for no time limit. Pressing the button a fifth time will turn it off.

Plugging the diffuser in

To plug in and turn on the Pure Daily Care Aroma Diffuser, start by filling the diffuser with clean water between the min/max line on the inside. You can then add a few drops of your favourite essential oil and replace the diffuser cover. Next, plug the diffuser into a power outlet and press the mist button to turn it on.

The diffuser will automatically turn off after one hour, but you can also press the mist button twice for 3 hours, three times for 6 hours, and four times for no time limit. If you press the mist button a fifth time, the diffuser will turn off.

The Pure Daily Care Aroma Diffuser also comes with a light ring. To turn the light ring on, press the light button once and it will cycle through the different colours. To keep the light on your preferred colour, press the light button again. To turn the light off, simply hold the switch for a couple of seconds.

Pressing the power button

The power button on the Pure Daily Care Aroma Diffuser is located at the front of the diffuser base, with the light button. One press of the power button will turn the diffuser on for one hour, after which the diffuser will automatically turn off. If you press the power button twice, the diffuser will turn on for three hours. Pressing the power button three times will turn the diffuser on for six hours, and pressing it four times will mean there is no time limit. To turn the diffuser off, press the power button for a fifth time.

If you forget to turn the diffuser off, there is no need to worry about damaging the unit as it will automatically turn off when the water runs out.

Frequently asked questions