A Fragrant Adventure: Burner Oil And Melted Wax

Wax melts are a great way to fragrance your home. They are easy to use, affordable, and long-lasting. But can you add burner fragrance oil to melted wax? The short answer is yes, you can. However, there are a few things to keep in mind. First, it is important to use the right temperature when adding fragrance oil to melted wax. The recommended temperature is 185°F, as this ensures the fragrance oil binds and mixes completely with the wax. Adding fragrance oil at a lower temperature can result in improper binding, affecting the scent throw and potentially causing the fragrance to leach out and pool on the top or bottom. The amount of fragrance oil added can be adjusted based on personal preference and the type of wax, with a common amount being 6% or 1oz per pound of wax. Additionally, it is recommended to use essential oil-based wax melts for health reasons, avoiding those with artificial fragrances or paraffin. With these tips in mind, you can create wonderful-smelling wax melts safely and effectively.

How much fragrance oil to add to melted wax

Yes, you can add burner fragrance oil to melted wax. However, it is important to note that the temperature at which you add the fragrance oil to the wax can affect the potency of the fragrance. If the wax is too hot or too cold, it may result in the wax having little to no scent while burning. Therefore, it is recommended to add the fragrance oil when the wax is fully melted at around 175°- 185° F, specifically at 155°- 165° F for soy wax.

Now, onto the question of how much fragrance oil to add. A common amount is 6% or 1 ounce of fragrance oil per pound of wax. This can be adjusted based on the type of wax you are using and your personal preference. The maximum amount of fragrance oil recommended will vary depending on the type of wax, so be sure to refer to the specific guidelines for your chosen wax. For example, Golden Brands 464 Soy Wax has a maximum fragrance load of 10% or 1.6 ounces per pound of wax.

It is important that the fragrance oil binds and mixes completely with the melted wax. Adding fragrance oil at lower temperatures can cause the fragrance to not bind properly, negatively impacting the scent throw. In some cases, it may even cause the fragrance to leach out of the wax and pool on the top or bottom of your candle. Therefore, it is recommended to add the fragrance oil at 185°F to ensure optimal binding and fragrance throw.

Additionally, be mindful of the flash point of the fragrance oil, which is the temperature at which it becomes combustible. Always add the fragrance oil at or below the designated flash point to avoid any safety hazards. For flash points under 130° F, add the fragrance oil at or below 130°. For flash points between 130° - 180°, add the oil at or slightly below the flash point.

The temperature at which fragrance oil should be added to melted wax

Adding fragrance oil to melted wax is a great way to make your candles stand out. However, adding fragrance oil to your wax when it is too hot or too cold can affect the potency of the fragrance.

The optimal temperature for adding fragrance oil to melted wax is 185°F. This is the best temperature for the fragrance and the wax to bind together, and it will provide the best fragrance throw in your finished candle. Adding fragrance oil at lower temperatures can cause the fragrance not to bind properly with the wax, negatively impacting the scent throw. In the worst case, the fragrance may leach out of the wax and pool at the top or bottom of your candle.

The pouring temperature, or the temperature at which you pour the fragranced wax into the container, depends on the type of wax you are using. Different waxes have different melting points, so it is important to know the melting point of your wax and the temperature at which it is best to mix. Usually, any wax will begin to melt at around 130°F, but the point at which the wax will be ready to mix differs. For example, if you are using soy wax, it is recommended to begin mixing once the wax hits about 155° - 165°F.

Therefore, it is crucial to add the fragrance oil at the right temperature to ensure the best results for your scented candles.

How to make wax melts with fragrance oil

Wax melts are an easy and effective way to scent your space. They are simple to make and can be customised to your preference. Here is a step-by-step guide on how to make your own wax melts using fragrance oil:

Ingredients and Materials:

• Wax: Soy wax, beeswax, or a blend of your choice.
• Fragrance Oil: Choose your favourite scent or a blend of fragrances.
• Heatproof Container: A glass jug or bowl that can be safely placed in the microwave.
• Moulds: Silicone moulds in your desired shape and size.
• (Optional) Wax Dye: To add colour to your wax melts.

Step-by-Step Guide:

Step 1: Melt the Wax

Place your chosen wax into the heatproof container. Melt the wax in the microwave in 30-second intervals, stirring after each interval, until the wax is fully melted. Be careful not to overheat the wax as this can cause white spots to form.

Step 2: Add Fragrance and Colour (Optional)

Once the wax has melted, allow it to cool slightly. When the wax is still liquid but starting to solidify, add your chosen fragrance oil and stir well. This is also the step where you can add a few drops of wax dye if you want to colour your wax melts.

Step 3: Pour into Moulds

Pour the fragranced wax into your chosen moulds. Avoid making the melts too thick as they will take longer to melt when in use. Place the moulds in a cool, dry place and allow them to harden completely. Leaving them overnight is usually best. Do not put the moulds in the fridge, as this can cause the wax to crack.

Step 4: Remove from Moulds and Enjoy

Once the wax has hardened, carefully remove the wax melts from the moulds. Your wax melts are now ready to use! Place one or more melts in the tray of your wax warmer or oil burner, light it, and enjoy the fragrance.

Tips:

• You can adjust the amount of fragrance oil used according to your preference. Typically, a common amount is 6% or 1oz per pound of wax, but this can be increased or decreased based on your desired scent strength.
• Store your wax melts in a cool, dry place in an airtight container.
• Reuse your wax melts: When the scent fades, you can remelt the wax, add more fragrance oil, and create new wax melts.
• Experiment with different fragrances and blends to find your favourite combinations.
• Always be cautious when handling hot wax and lit candles to avoid burns. Keep burners and warmers out of reach of children and pets.

Wax melts are a fun and simple way to enjoy your favourite fragrances. By making your own, you can create unique, customised scents and avoid potentially harmful ingredients found in some store-bought melts. Enjoy crafting and scenting your space!

How to use wax melts with an oil burner

Wax melts are a great way to diffuse fragrance and make your room smell nice. A wax melt is a solid piece of wax that has a blend of essential oils or fragrance in it. It works by using it instead of essential oil. Here is a step-by-step guide on how to use wax melts with an oil burner:

Step 1:

Place your oil burner on a coaster or a heatproof surface to avoid burning your surfaces as the burner gets very hot.

Step 2:

Light a tea light candle and place it into the oil burner. Use 1 regular-sized unscented tea light candle in your burner and do not add water.

Step 3:

Place the wax melt on top of the oil burner. Depending on how potent you want the aroma to be, add a few wax melts to the reservoir at the top of your oil burner. The wax melt will slowly melt and release the aroma into your room.

Step 4:

Enjoy the scent from the wax melt. When it has fully melted and the scent dissipates, you can either add another wax melt if you want to continue or blow the candle out and allow it to cool before cleaning and putting it away.

Additional tips:

• Always keep the burner in sight when burning and never leave a lit tea light unattended.
• Keep the burner away from drafts.
• Always follow the safety information on the packaging.
• Regularly check your burner for hairline cracks or chips before use. Never use burners with cracks or chips as this can be a fire hazard.
• Do not attempt to move the wax burner while it is burning.
• Remove all packaging before placing the wax in your burner.
• Use a suitable amount of wax for the size of your wax burner. Do not overfill.
• After the fragrance is gone, you can either throw away the used wax or reuse it to make a new candle, some wax melts, or to seal a letter.

How to remove wax melts from an oil burner

The first step to removing wax melts from an oil burner is to let the wax cool and harden. This makes it easier to remove and avoids the risk of burning yourself. Once the wax has hardened, there are a few different methods you can use to remove it:

Scrape the wax

Gently scrape off as much of the hardened wax as possible, using a plastic scraper, an old credit card, or a silicone spatula. Be careful not to scratch or damage the surface of the burner.

Use a hairdryer

If the wax is hard to budge, you can use a hairdryer on the lowest setting to soften it. Hold the hairdryer a few inches away from the wax and move it in a circular motion. The heat will soften the wax and make it easier to remove.

Soak with kitchen roll or cotton wool

Layer a few pieces of kitchen roll or cotton wool pads over the softened wax and gently press down. The wax will stick to the paper or cotton wool and can then be lifted out of the burner.

Melt the wax

Place a tea light candle in the burner and allow the base of the dish to heat up for around 15 seconds. This will melt the bottom of the wax melt while keeping the top solid. Gently push the wax from the side, and it will slip out. Wipe away any residue with a dry piece of kitchen paper.

Use rubbing alcohol or vinegar

If there is still some wax residue left on the burner, dampen a cloth with a small amount of rubbing alcohol or white vinegar and wipe the edges of the burner.

Put the bowl in the freezer

If you have an electric wax burner with a bowl design, you can place the bowl in the freezer for a short time to allow the wax to harden and then simply pop it out.

Frequently asked questions